Wyniki wyszukiwania: vc

PVC pipe spoolholder support

A minimal pipe flange for makers in a hurry, made for 40mm PVC pipe and 3mm wood screws.

BTT HDMI7 Corner Mount for Ratrig Vcore 4

Very good instructions from Dave Wilson. Thank you. https://www.printables.com/make/2339640?comment_id=2339640

4-inch PVC drain pipe to flexible hose adapter

One of the cheapest options for dust collection in home woodworking shops is to use readily available and cheap PVC drain pipe. The problem is that most dust collection fittings are not made for these pipes (though that seems to be…

Gridfinity base for VC Design's Radius Gauge Set

Stores VC Design's radius gauges in a Gridfinity block. When closed, the bin extends past its footprint.

Sturdier RatRig 4 VCore Front Clamp with more clamping force

Sturdier RatRig 4 VCore Front Clamp with more clamping force

Small 3030 Daylight LED Mount (Vector3D) (VCore 4 with enclosure)

This is my LED Daylight Holder to mount it under the extrusion for my RatRig VCore4, but it could also used for other printer like Voron and so on. I used the Vector3D LED Stripe. I made and used it for my V-Core 4 with full closed…

PVC Pipe holder for Coroplast Props

Very useful when you want to attach a Coroplast prop to a PVC pipe to hold it straight. I use this on tombstones and other standing Coroplast models for LED pixels (WS2811) Printing: Filament: PLA Infill: 15-20% Nozzle: 0.2mm No supports…

PVC Pipe Base Holder for Coroplast Models

You can use this at the base of your Coroplast model to hold a PVC pipe that will keep your model straight. Works very well with my other model https://www.printables.com/model/1084357-pvc-pipe-holder-for-coroplast-props Printing:…

JVC Remote Battery Hatch

So, this is just the battery hatch for an old JVC TV remote… I believe it's the JVC RMC384. I got one and the hatch was taped on, so I thought I'd model a replacement. It fits perfectly, best to print in PETG for strength on the tab. I…

RatRig VCore 4 Ethernet mount

Route the ethernet cable via the bottom hole up the middle extrusion in the back into the electronics box. Connector used: https://www.amazon.nl/-/en/dp/B07NJ5XNMN

A-Frame Bracket for Conduit or PVC

This is was originally designed to make a target stand utilizing standard conduit or PVC pipe. v2 will work with any 3/4in (19.05mm) diameter conduit or PVC tube v3 is a larger version that works with up to a 1.35in (35mm) diameter tube.…

NVCS-3000 ROBLOX DOORS (2)

ROBLOX DOORS NVCS-3000

8mm PVC Spool Spacers (1.5'' ID / 1.9" OD) Thickened

5mm and 10mm spacers to clip onto a 1.5 inch pipe to keep filament rolls from moving around when storing them. This can be used with the Ultimate Filament Dry Box. In the picture the black colored spacer is the original.

RatRig Vcore4 Retractor

Update 3/3/26: These retractors last around a 1000hrs of print time before the winding mechanism fails. The stock piano wire broke at the extruder, so I needed something to hold the umbilical up and out of the belts / print. Simple…

vcom-like device

There are 2 models. The big one need supports during print, it's closer to the original V-COM design. The second one (short) does not need supports, you are supposed to put it directly at the end of your mask tube.

VCGJ models

I made these for the first Virginia Collegiate Game Jam. If you participated and want one of your own, feel free to download and print them!

Adapter for 7 inch felt filter bag to 1 1/2 PVC for slime bag or dust filtration

Adapter for 7 inch felt filter bag to attach to a 1 1/2" PVC connection for use as a pool slime bag or dust filtration. I made this adapter for this 7" X 32" felt filter bag: https://a.co/d/hf8bH57 This had a plastic collar that this…

Ratrig Vcore4 400 Linkage Hinge

I designed this 4-bar-linkage Hinge, to have the Doors of my Vcore4 400 fold outward to the side of the printer in a controlled way. I’m using 6mm PC Panels for the door, and 6mm ACM + 8mm Insulation for the Sidepanels. I also added a DXF…

HELIX IMPACT IQ W8-DVC2 - stand - new version

The holder can be printed from any material. No supports are necessary when the model is placed on the build plate with the foot facing down. A layer height of approx. 0.15mm is recommended.

HELIX IMPACT IQ W12-DVC2 - stand - new version

The holder can be printed from any material. No supports are necessary when the model is placed on the build plate with the foot facing down. A layer height of approx. 0.15mm is recommended.

Hinge for PVC, 13mm / 1/2" CTS CPVC (15.9mm OD)

Joints to create a PVC door You'll need one 25mm M3 screw to attach the hinge. Hinge-A PVC-Corner-A.stl PVC-Corner-Frame-A.stl Hinge-B PVC-Corner-B.stl PVC-Corner-Frame-B.stl Please note: This is designed for 1/2" CTS (Copper Tube Size)…

Male Threaded end cap for 4in PVC pipe connector

A simple end cap with a threaded male end to go with another female open connector to attach and close a 4in (can easily be scaled up or down) PVC pipe. edit: Have added the stl file as well per request.

Reptile Habitats Dubia PVC Enclosure 1” Stacker / Spacer

Silicone tape was used to reinforce all connections. Ended up being quite stable but your mileage may vary- I take no responsibility for your reptiles' safety. More parts in CAD below, but they aren't tested so make sure to measure…

3 Way Internal PVC Pipe Connector

This 3 Way Internal PVC Pipe Connector has been designed to be used with 20mm PVC pipe to make some FPV gates (in particular tiny whoop gates but I'm sure you could make full sized gates just by leaving the PVC pipe longer) This model has…

Starlink Mini antenna base to PVC pipe adapter (42mm OD)

Prints on Prusa Mini in PETG. Adapts the pretty huge, odd-shaped hole in the Starlink Mini antenna base to a ring accepting PVC pipe with 42mm outer diameter. Did not take a picture of an acutal print - this model is the adapter between…

TPA Soft Base Pad for 68oz Bivvclaz Glass Pitcher

This soft protective base pad is custom-designed for the 68oz (2-liter) Bivvclaz glass pitcher. 3D printed with flexible TPU or TPA filament, it adds grip, impact protection, and noise damping to your glassware. Functions: Noise Dampener:…

MultiGp Drone hinged drone gates 3/4" pvc pipe

designed these so i could quickly setup and take down pool noodle style gates for practice and they work great. for stacking gates, they are designed with time, cost and durability in mind i use 2' long 1/2" rebar and in the middle i take…

CNC Milled Toolhead for the RatRig VCore 4/4.1

Update 11.08.2026: Added EBB36 Gen2 toolboard mount for the LGX Lite v2 and Moschito Magnum+ Liquid spacer Update 29.07.2026: Added 19 ID hose duct for the EBB42 Gen2 / Sherpa Mini combo Update 11.07.2026: Added OS2 toolboard mount for…

RatRig VCore 4 Thermal Fuse Wago Mount Mod

I used four walls, 20% infill, 0.1mm layers (helps with the overhangs).

Outdoor PVC Projector Stand V2

This is my second version of a projector mount utilizing ~21.5mm PVC pipe meant for outdoor use. This version is stronger, more stable, and more versatile in terms of the ground you place it on. I've only tested with the VANKYO…

3in PVC Pipe Bracket

A bracket for mounting 3in PVC pipe. The bracket is designed to work with 1/4in bolts and nuts and 1/4in Tapcon screws (for mounting to the wall). There is also space for 1/4in washers under the bolts and screws. It should work with…

Miminka halloweenských kostlivců/Baby halloween skeletons

Roztomilá halloweenská dekorace v podobě kostlivců

Snap On PVC Clip / Clamp for attaching cloth or materials to "1/2 inch" PVC Pipes and Fittings (U.S.)

Occasionally, I need to make display backing or surrounds with ½" PVC pipe frameworks and with cloths draped over the pipes. These clips help secure the cloths to the PVC frames, and they are easily removed. There are two sizes of these…

IKEA Kallax Filament Storage Rack - PVC edition + different rod diameters

I found the 8mm dowel to be too flimsy for the application, so I remixed the design to allow for easier-to-find and cheaper materials in Canada/USA. Repaired broken 3mf, as well as added multiple bore sizes to fit standard PVC/CPVC…

150 to 125 PVC pipe adapter

I was looking for this adapter everywhere, but all the options were either non-existent or too expensive where i live. Disclaimer: this is not a permanent fix, it should be only quick and short-term solution. This doesn't apply if you're…

VCore 3.1 Machined AWD and Lever M3 Tensioner

V2 is here Hard mount the motors machined tensioner arms Better bearing retention much better IS results Easier to machine (except for the tensioner arms) General This design is based off of BRS Engineering's Lever M3. It's what I was…

JVC Remote Holder

This is a wall mounted remote holder for JVC Remotes

N connector antenna adapter to 20mm PVC conduit

A simple adapter which fits a male N-connector (or Type-N connector) and a 20 mm PVC conduit. I use it for making Meshtastic antennas, one of them can be seen installed on a solar node. Easy to use: Print in PETG, completely solid, wide…

Latch button for Kärcher VC 3

Printing advice I suggest adding a support blocker in the region where the spring is inserted (Image attached) Story I designed this part because I had a Kärcher vacuum which had the hook broken off of this latch button. Because this…

RaceGOW / Tiny Whoop Gate Parts / Schedule 40 PVC Connectors Home Depot (US)

I didn't want to buy a whole bunch of PVC connectors from a home improvement store and I didn't want to 3D print connectors based on the OD of the PVC. These parts are remixed from the following model because the original model did not…

Tapa Canaleta pvc 100mm - 4"

tapa para colocar en la punta de una canaleta o caño de pvc de 100mm.

Fvck Duck

You mess with the duck, you get the fvck. Alternative names: Dick Duck Avian Avenger Member Mallard Peep Peeper Quack Attack

RatRig VCore 3.2H XY Joiner - Lightweight Gantry

The RatRig VCore 3.2H XY Joiner comes with the VSlots on the model - I have a lightweight gantry that doesn't have VSlots - so I've remixed the official model from RatRig and removed the VSlots - fits most Lightweight Gantries. My gantry…

Bezpečnostní krytka hrotů protiskluzového nástavce na berle

Po operaci kolena musím dočasně chodit o dvou francouzských holích. Vzhledem k zimnímu počasí používám protiskluzový nástavec na berle s kovovou sklapkou. Abych zabránil úrazu, či poškození oděvu nebo čalounění auta, když protiskluzový…

Třecí deska pro terčovce a skaláry / Breeding plate for discus and angelfish

Třecí deska pro terčovce a skaláry, stačí doplnit o přísavky. Vhodné tisknout na strukturované podložce Breeding plate for discus and angelfish; simply add suction cups. Best printed on a textured build plate

KÄRCHER VC 2 vakuum replacement weel

Replacement weel for a Kärcher vakuum. the axis is a press fit. Maybe you need an extra tool to press it in,

1/2 Inch PVC Wall Clamp

Need to secure a half-inch PVC pipe to a wall? I got you covered. This clamp can be bought at a hardware store, but if we wanted to do that, we wouldn't have these 3D printers. Drop a comment if you want to see me do more sizes. Let me…

BTT EBB42 Gen2 + EBB USB Adapter Interface Mounts for Eva 3.x + LGX Lite on RatRig vCore3.1

This is a remix of a BTT EBB42 toolboard Mount originally posted by mmullerphoto to be used for mounting the BTT EBB42 Gen2 toolboard onto a RatRig vCore 3.1 printer using Eva print carriage system. A shortened cable guide from the Eva…

Ratrig Vcore 4 3.2H Hotend Front Dragon Ace Volcano

I adapted PP000334-rr_toolhead_vc4_front_beacon_V01_20240425 front part to accommodate Dragon Ace Volcano hot end. It allows the reuse of all other parts in the hotend, including the original metal top plate. There is a relief for both…

Z-Upgrade 4.0b for VCore 4.0/4.1 Ballscrews mod

STORE LINK AVAILABLE with 1204 and 1605 Ballscrew A Z-Upgrade complete overhaul for VCORE 4.0/4.1 The Z-Upgrade replace the original Z system with a ballscrews driven system. More precise, more reliable over time, it offers a very high…

Clip na držení filamentu na cívce

Clip tisknutý z PLA výška vrstvy 0,2 bez podpěr. Po vytisknutí je nutno zámek rozhýbat. zkoušel jsem je na cívky od Průši použít trochu síly a drží bez zámku . A na cívky Aurapol s použítím zámku. Snad se bude tento model někomu také…

Tehalit Oberteil PVC, B80mm BRN-Kanäle 700802 lgr

Cut our some power outlets then there was missing 1m of these Tehalit 80mm veneers. I am planing to do some with a motive or flexible to put some like colored pearls in them to something like pixel art :)! Could get awesome! Happy printing!

diy pvc filament rack

in order to make full rack, you need to print 4 of the top/bottom pieces and 2 of the middle pieces. If you want more than just 3 levels, print more middle pieces. I printed with auto tree supports in pla. pvc size is for 1/2 inch pipe. I…

Držač za stvarenje drvca./Holder to make tree.

Držač za stvaranje drvca.

Einhell TC-VC 1820S dust bag adapter

The dust bags for my Einhell TC-VC 1820 S frequently fell off. So I made this adapter ring which makes the bag sit tighter. The adapter is printed from PETG with 3 wall loops. It can also be fixed with a tie-wrap to fit even stronger.

1/2 Inch Schedule 40 PVC Clip On Mount

I made this PVC snap on mount holder to keep a homemade baby gate in place at the bottom of our stairs. Printed out of PETG with a .6mm nozzle .24mm layer height, 4 walls, top and bottom layers, and 15% infill. I'll scale it for other…

PVC warp-weighted weaving frame

A tablet weaving frame-style loom that builds onto two two-foot sections of PVC. My preferred setup is to place the curved crossbar so the retaining screw holes are at the eighteen inch mark, leaving roughly five inches of pipe sticking…

32mm pvc hose to 50mm adapter

Works to connect this back flow 2" (50mm) to a 32mm hose found in spa air hose. https://www.tubs.fr/fr/clapet-anti-retour-air-waterway-p-546.html https://spasupport.se/produkt/poolslang-pvc-32mm-05-m Glue between this part and hose, and…

Black and Decker Dustbuster HNVC115JB06 Vacuum Nozzle

I needed a long nozzle to fit into narrow areas, so I made one. It seems to keep a good seal around the insertion point and keeps good vacuum. Below are the settings I used. These are only a recommendation as this will probably print with…

3/4 Inch PVC Holding Clip

This Clips onto 3/4" PVC and can be used to mount it in place with two screws. Printed from PETG 3 Walls 3 top and bottom layers, no supports. 10% infill. It seems to clip well onto most household broom handles, to keep them from tipping.…

1 Inch PVC Clip On Hold Down

Clip on PVC Pipe Hold Down Bracket for 1 inch PVC Pipe. Petg 3 walls, 3 top and bottom layers. 10% infill. No Supports.

Electric tube PVC pipe holder

Electric tube PVC pipe holder

osVAC Neo 40mm adapter (FITT Lightflex BK Black PVC hose for ponds)

This is an adapter for the osVAC Neo system that can be found here: https://www.printables.com/model/234267-osvac-neo-fusion-360-files I needed a 40 mm pipe for my extraction system in the workshop to connect a cyclone separator. The…

3/8-24 Vertical Antenna PVC Mount Cap

3/8-24 vertical / ground plane antenna mount cap for one-inch Schedule 40 PVC. Designed for portable amateur radio operation. The four tabs on the cap accept 6-32 hardware for ground radials. Four strips of aluminum were fabricated that…

VCORE 3.x BRS-Shelves with CPAP silencer for L3ver M1

Fit any VCORE 3.0 or 3.1 with the Last L3ver M1 belt tensionner The installation is quite straightforward You can contact me at [email protected] if you encounter difficulties You will need: -M3x8mm countersunk -M3 inserts -M3…

Valorant VCT Kramabit Knife

Karambit-Knife from VCT 2025 for 3D-Printing either in two parts or one, both models in the file.

5/8 PVC Tee Connector

This is a simple 5/8" Tee made to join two pieces of 5/8" PVC together. It’s meant for 5/8" outer diameter PVC (0.625"). The fit should be snug enough to hold well, but still slide on without needing to fight it (depending on your printer…

Hexagonal Corner Connector x2 120deg for PVC Tubing

Type of corner / connector allowing to build a number of bespoke gates for Whoop Drone Racing. Fits 20mm or 22mm PCV Other Drone Accessories here: https://www.printables.com/@StudioMechanik/collections/3053772

Hexagonal Corner Connector x4 120deg double for PVC Tubing

Type of corner / connector allowing to build a number of bespoke gates for Whoop Drone Racing. Fits 20mm or 22mm PCV Other Drone Accessories here: https://www.printables.com/@StudioMechanik/collections/3053772

Hexagonal Corner Connector x4 90deg double for PVC Tubing

Type of corner / connector allowing to build a number of bespoke gates for Whoop Drone Racing. Fits 20mm or 22mm PCV Other Drone Accessories here: https://www.printables.com/@StudioMechanik/collections/3053772

Makita SP6000J and vacuum (Makita VC)

Megoldás arra a problémára hogy a cső leesik vágás közben. A C alak alsó része még túl nagy nehéz kivenni belőle a fejet. V2 - javitva Kell egy csavar (M4) ami rögziti a fűrészhez aelső részt ami ezért kell mert felszerelve nem fér el a…

Hexagonal Foot Connector x1 for PVC Tubing

Type of corner / connector allowing to build a number of bespoke gates for Whoop Drone Racing. Fits 20mm or 22mm PCV Other Drone Accessories here: https://www.printables.com/@StudioMechanik/collections/3053772

Taras Hryhorovych Shevchenko Bust

Taras Hryhorovych Shevchenko Buste 🇫🇷 Description (Français) Ce buste représente Taras Hryhorovych Shevchenko , poète, écrivain et artiste ukrainien du XIXe siècle, figure fondatrice de l’identité culturelle ukrainienne moderne. L’œuvre…

ratrig vcore 4 chamber heater

Ratrig Vcore 4-chamber heater. Two 300W 24V heating elements, one 120mm radial fan, and one thermistor (example from a V6 block, 100K). 16 threaded inserts M3x7. The two large parts should be made of a heatresistant, material (ABS, GF).…

Fisker Ocean VCU harness clamp

Print with 7 Walls ( enough wall thickness) and zero infill best results with PETG print on the "INPUT"side to print without supports add 5mm screws

Solar panel PVC leg mount

This mount attaches 1" PVC legs to a solar panel at a 45 degree angle. I use these on cheap rigid solar panels in the backyard to add lightweight stands that can be easily rotated and moved as the angle of the sun changes. The screw hole…

DIY Ventilation Chimney System - PVC Pipe Adapter Kit (Ø110 & Ø95)

DIY Ventilation Chimney System - PVC Pipe Adapter Kit (Ø110 & Ø95) Description: A comprehensive set of 3D-printable components designed to build a professional-grade ventilation chimney. This system is engineered to integrate standard PVC…

5000 Trac VC Set (42054-1)

This is the 5000 Trac VC set. Like this and check my other sets if you want me to share more. The instructions are at the bottom of the files, and the specific colors you need to print with are in parentheses in the folder's name, but any…

Phoenix 30 – Modular TVC Model Rocket

Phoenix 30 is a fully 3D printable model rocket built around a standard 30mm cardboard body tube, combining accessibility with a strong, modular airframe design. Originally envisioned as a thrust vector controlled (TVC) rocket, Phoenix 30…

8 inch to 4 inch airway reducers and splitters for PVC and Wire-HVAC Vent Hose Dust or Fume Collectors

Reducers and reducer-splitters for PVC/vent-hose, originally designed to attach to an AC Infinity butterfly backdraft gate for attaching to multiple 3D printer enclosures. R4: Only 4 way splitter. Experimental. Supportless attempt. All…

Chicken Feeder 90mm PVC pipe

IMPORTANT These designs have been created with exact measurements. Due to material shrinkage and PVC pipe anomolies I highly recommend using the PVC test as a guide to what resizing you may need. In Creality Print I settled on 101.5%…

1/2" Charlotte (PVC) pipe end cap

It's a pretty simple part. The base is the same diameter as the outside of the pipe and the four protrusions from it are a cylinder with a base the same diameter as the inner diameter of the pipe. The top of the cylinder was made a bit…

Rat Rig Vcore 4.1 Steel tube fitting parts (Funssor CNC Joiners)

Parts to help fit a 4.1 steel gantry to funssor joiners on a ratrig vcore 4.1 End plug is designed to fit a m5 flanged locking nut, to allow for movement and adjustment you will need to drill a slightly oversized hole (6mm+) in the right…

Modular Heavy-Duty Hose Storage Reel (PVC & PETG-CF Hybrid)

Stop buying $1,000 metal reels that rust or $50 plastic reels that snap under weight. This modular storage reel is designed to be the last one you’ll ever need. Originally engineered for the harsh, corrosive environment of a soft-wash van…

Lovci pokladů - potápěč / Treasure Hunters - diver

Model potápěče pro stolní hru Lovci pokladů - remix níže uvedeného původního modelu vznikl se svolením jeho autora, za což mu děkuji. POZOR: Potápěč je ve dvou verzích verze DINO pro moderní verzi hry od společnosti Dino verze RETRO pro…

Lovci pokladů / Treasure Hunters - insert (Dino version)

Insert pro stolní hru Lovci pokladů (moderní verze od společnosti DINO). Insert se vejde do krabice včetně původní papírové vložky a pojme veškeré dílky hry a 16 ks vytištěných potápěčů pro lepší zážitek ze hry. Držák mincí pokladů je…

Water Nozzle for 20mm PVC Pipe – High Pressure Jet (6mm Outlet)

Simple and effective water nozzle designed for standard 20 mm PVC pipe. This nozzle smoothly reduces the diameter to 6 mm, creating a strong and focused water jet with increased range. Perfect for DIY water filters, pumps, or any setup…

Rugged Case for Canon RF 35 F1.4 L VCM

Rugged Case for Canon RF 35mm F1.4 L VCM To keep it safe during transport e.g. in the luggage on a Plane. The original lens hood fits in there as well A version for these lenses is available: RF 100-400 F5.6-8 IS USM…

Lovci pokladů / Treasure Hunters - insert (Retro version)

Insert pro stolní hru Lovci pokladů (Retro verze z osmdesátých let). Insert pojme i 16 ks vytištěných potápěčů pro lepší zážitek ze hry. Držák mincí pokladů je vyjímatelný, aby na herním stole nezabral tolik místa. Potápěči k tisku zde:…

Slim 48mm uPVC Balcony Pull Tab

Overview A clean, minimalist replacement for the standard plastic "pull tabs" on balcony and patio doors. This model specifically features the common 48mm screw hole spacing (center-to-center), making it a drop-in replacement for the…

Yaesu ATAS 120 PVC Storage

Designed as a simple adapter to mount the top of a Yaesu ATAS-120 inside a 2" PVC pipe, while allowing a 1/2" PVC pipe to extend upward and protect the antenna’s upper wire. The 2" side provides a stable seat, and the 1/2" pipe acts as a…

RatRig VCore 4 cable guide with dual Wago 221 420

Modified cable guide with brackets for two Wago 221 420 connectors

Sony VCT1170RM tripod - TPU rosette insert

This is the TPU rosette (toothed spacer/washer) for the Sony VCT-1170RM tripod head. It sits between the teeth on the rotating handle mount and the head body. The original plastic wore out over time, causing the handle to bind or not…

PVC Pipe Cradle (1.25” / 60mm OD) – Low Profile Support Block

Tired of PVC pipes sitting directly on concrete and collecting debris? This simple pipe cradle lifts your pipe slightly off the ground to keep things cleaner and better supported. My pool equipment has a bit of PVC pipe sitting on the…

domeček se seníkem pro hlodavce

seník s domečkem pro morčata a křečky-prolízka

Bosch QuickConnect Adapter to Einhell TE-VC 18/10 Li Akku-Nass-Trockensauger

Schlauchaufnahme ca. 25 mm tief konisch: unten ca. 34 mm; oben ca. 34,7 mm

PTC Heater holder for Rat Rig Vcore 3.1

1/2" PVC EMT Tee fitting - slip connection

Needed to whip up something to be able to direct-feed some TPU for a few projects that need to finally get done. I already had some PVC EMT tubing from a previous project, so I remixed the elbow that I used for the corners, and created a…

1in PVC Mast Support

Screw-attach mast supports for a 1" PVC pipe. Designed for ham radio, but could be useful for other things.

3" PVC Stand

I use a 3" x 12" PVC pipe to hold my various automotive funnels in the garage. Due to the shelves the previous owner installed, there's not much wall space to mount my PVC pipe on the wall. So, I designed this simple stand to stop the…