Liczymy pasujące modele…
American V-Twin Harley-Davidson Style LOGO - Keychain - Portachiavi - Porte Clès - 钥匙链 - Schlüsselanhänger Resize to adjust dimension If you download/enjoyed this file, please leave a like - Thks All trademarks, logos and brand names are…
These dividers fit the Catch All models 100x150 very snug, are 30mm high and don't have to be glued. If you want them higher, you can make them higher, but whatch the hight if you still want to stack other trays on top of it. This model…
Adapter to mount 2 40mm fans to Nvidia L40 GPU. Fans are mounted by M3 bolt directly to the plastic body. Adapter is mounted with original screws.
Any print settings will work, however to get the best details and print quality use a 0.25mm nozzle, but a 0.4mm nozzle could also work fine! Change the x and y axis percentage to adjust the size of the Harley-Davidson keychain to your…
Heyho Yesturday I came up with the desire to create my own turn table xD So here it is! Features Strong : I designed this Table to hold quite some weights. The main tolerance/ wiggling will be due to the bearing itself. In my tests I…
También disponible en Thingiverse: https://www.thingiverse.com/thing:6824102 Cults3D: https://cults3d.com/es/modelo-3d/casa/adorno-bola-de-navidad-sandra El modelo de ejemplo está impreso en PLA efecto plata.
También disponible en Thingiverse: https://www.thingiverse.com/thing:6824105 Cults3D: https://cults3d.com/es/modelo-3d/casa/adorno-bola-de-navidad-danielle El modelo de ejemplo está impreso en PLA efecto plata.
Made a divider for my hardware bins. I'm sure they will fit any but the box I have is an HDX brand, as shown in photos. I printed using “vase” mode because I'm not concerned with strength but it used less filament.
Tabbed dividers, 90mm (3.77in) x 120mmm (2.87 in) tall, I made to help my wife organize paper crafting stamps.
In the fusion360 file you can specifie all the required paramters to your needs: how many compartments in y direction how many compartments in x direction size in y direction size in x direction z height first layer height wall thickness
A simple holder for the camera unit of the "Momcozy Baby Video Monitor BM01". Depending on where the bed is, you don't always have a surface nearby to put the camera on. So I designed this holder to be hung on the side of the baby's bed.…
If you're like me and you have fluctuated in size over the years but kept different size clothes still in your closet I designed these simple size hanger dividers to make it more organized. I've done most sizes that will be needed. To get…
Arbol Navidad efecto Neón AVISO: Basado en el diseño de @Control3d Video Explicativo https://www.youtube.com/c/Control3D OTRAS REFERENCIAS : https://www.printables.com/model/975255-corazon-instagram-heart-neon-sign
Clone of the original divider for large ToughCase (DT70804, DT70839)
Cortador de galletas con diseño de navidad, son dos piezas cortador y marcador se imprime junto. Para no perder detalles marcar opcion aracne.
125mm & 150 mm sandpaper holder with floating dividers for easier organisation in the workshop. The Cradle is not my design I have remixed it a bit for my needs. I added the dividers since the use for me depens on the type of job I do. So…
its a very simple pokemon card divider ive made for my collection, very simple and require not a lot of materials.
My brother needed extra dividers for his drawers. I modeled them up for him and thought I'd post on the off chance anyone needed the same. The drawer units were sold in Menards up to a couple years ago. Second image shows the printed…
I mounted the IKEA FLISAT wall storage on the IKEA SMÅSTAD. To keep things from falling out I designed this divider. Simply print as many as you want and and clip it on the places you want. To secure them you may optionally put a small…
This is the result of exploring the ring from the Tipping Point VRC game aiming to print some efficiently. It holds together of its own accord unless knocked. A dab of glue should seal the deal. I printed four copies here fast with a…
Small Parts Organizer Drawer 4x6 (Remix with Two Dividers) This remix is based on the original Drawer 4x6 for the Small Parts Organizer ( https://www.printables.com/model/1085458-small-parts-organizers ). Modifications: Two dividers have…
cable organizer hook with divider. so you can separate power cables from the data cables.
cable organizer hook with divider. so you can separate power cables from the data cables.
I have remixed the given 3D-models for separator wall size 4mm because the wall size of the original dividers (7mm) was much too thick for my use case. By reducing the wall thickness, a lot of time and material can be saved. The length of…
From my video: Print with 0 top layers and 0 bottom layers and adjust the infill pattern and percentage for your desired mesh appearance. I STRONGLY advise against printing it solid since that thing struggles enough for air as it is. The…
Schachtel mit Deckel für 10 Filmdosen für 35mm Film verschiedener Ausführung. Die Abmessungen sind dermaßen gewählt, daß sie mit Velour ausgekleidet werden kann. Unter den Modelldatein ist auch eine Schablone um die Auskleidung im Deckel…
Further development of the number board, added a panel for separators
Nintendo Switch video game storage for 12 boxes and 6 cards.
I created this Ikea Mosslanda support for an old video projector I had lying around. The piece slides smoothly from any side of the shelf to the desired position and stays in place when the projector is placed on top. In my case, I…
Schachtel mit Deckel für 10 Stück 120 Mittelformat Filmdosen oder Schachteln verschiedenster Ausführung. Die Abmessungen sind dermaßen gewählt, daß sie mit Velour ausgekleidet werden kann. Unter den Modelldatein ist auch eine Schablone um…
The Ikea Komplement divider for the 40 cm depth Pax (804.675.65) have a tendency to look disorderly. This brace fixes that.
A cheap but high quality Video Light stand designed (not only) for RaLeno LED Video Light. There are three versions available: Metric version using a 15mm tube and an m6x35 nut and bolt, Metric version using a 15mm tube and an m5x35 nut…
I found myself at the beggining of another LEGO collection in possesion of my kids. It needs to stay organized and searchable. The set of bricks that found it's home within Lego Classic Creative Suitcase 10713 has increased. The Divider…
Variant of the Divider STL file to have the "click" when mags are inserted for a better lock.
should be a simple quick print just print facing up, changing the color for the top and bottom isn't necessary but adds a nice touch. I hope to add more hole sizes in the future, the current model measures 8 mm in diameter.
A very simple divider to split a token box for Academic 133+ XL deckbox into two spaces. The fit is loose but in my experience it doesn't tend to move around much when there's dice or tokens in.
This is a 3D-printed clip to mount a Thomann Ovid system microphone onto an Irish wooden flute , designed as a replacement for the flute holder provided by Thomann. I designed it specifically for my Villoing Irish flute , but it should…
So easy that you can do it with one hand! Heyy you, are you tired of missing the filament hole on your CORE one? Well.. i know that i am, so i made this quick to print attachment that you can print under 6 minutes at 100% Or if you're a…
Double length screw box divider. 54 W x 52 H x (79 x 2 )L mm, for long screws
Introducing the 'Individual Scale' model, perfect for cosplay enthusiasts and DIY crafters. This triangular, textured piece boasts a precise, patterned design ideal for creating lifelike armor or accessories. Elevate your creative…
Vide-poche rond gravé – Motifs elfiques et symboles fantasy. Idéal pour bureau ou déco. Parfait pour y déposer des clés, pièces, bijoux ou accessoires. Ce modèle allie utilité et esthétique, pour une déco originale sur un bureau, une…
These are 3D-printable dividers for SMD component books as can be found e.g. as filled assortments on eBay etc. or empty on Adafruit . In addition to a filled book I also got an empty one, as well as some extra pages for 8 and 24mm…
Used a image from Daggerheart and Tinkercard to make a simple divider for my card.
A bold, eye-catching patch designed for tactical enthusiasts, airsoft players, or anyone who appreciates a touch of sarcasm and style on their gear. Made to stand out, provoke a smile (or a second glance), and start a conversation.…
I got tired of my tea bags getting tangled and messed up in my teabag tin, so I made this divider to keep them separate.
Eve Automata Bust from the video game Stellar Blade. This bust measures 25cm. This design has these STLs: -Bust -Base Thanks for stopping by :) Link to Patreon :) patreon.com/Artoys3dPrint Busto de Eve Automata de video juego Stellar…
This is adjustable support for GPU from 55 mm to 90 mm. I uplouded Fusion 360 files so you can modify it.
There is Room for up to 6 Neodymium Magnets with max Diameter 10mm and max Height 4.7mm. You dont need to put every Magnet in the pockets, you can choose how much you want to put in. If you put in all the Magnets, it will hold on very…
Since the original holder in cooperation with the DJI osmo camera caused the microphone to be visible in the frame, I created a new holder. Printed from PETG. layer height 0.2mm filling 20%, without supports. The holder consists of 2 parts
One of my RING Video Doorbell is mounted in the open and required some protection from the weather. This is a basic shroud that provides some protection form sun and rain. Printed in ASA for UV and Temp tolerance.
Due to the fact, that i had a hard time finding Vinyl Record Dividers with Music Genres on it i gave it a go and designed some by my own. So here they are: Simple Vinyl Record Dividers with a little notch, so they dont slip in too far. If…
Replaces the paper dividers in the plastic 5 Gum sleeves, making them refillable.
Fits nicely to organise small parts. I used many for both small screws and electronic components. The inside of the insert is "rounded" to make it easy to pickup parts.
Here's a universal lens support bridge for the Arri LWS / Lightweight 15mm standard (60mm spacing on centre). You can use it flipped up or down depending on your needs and your lens diameter. Making this saved me about $400, maybe it'll…
If you've purchased the 24-bin Benchtop Parts Rack from Harbor Freight, you may have noticed that each bin has slots/holes for up to three dividers, but it doesn't come with any. It's a pretty nice organizer even without dividers, but…
A new 3D figurine generated by AI, The Three Wise Monkeys. I print my models on a slightly ageing printer. I try to find the best quality/time ratio for my prints. I print these models in fairly small formats, and the quality of the…
Like it? Support me. Website: https://pixelglance.com Buy Models: https://cults3d.com/en/users/PixelGlance Summary This is a shade ring replacement part for the IKEA VIDJA floor lamp. Recreated with precise measurements from the original…
I wanted a dry-box with a rewinder system to pair with my ERCF V2. Filamentalist was the ideal choice that minimize space; however, I could not find a viable dry-box for it. I wanted a cheap solution for each spool to be individually…
The divider is about 43mm wide and 40mm high with a 1.2mm depth
Diseño del Pesebre Este pesebre está diseñado con líneas suaves y colores cálidos para evocar una sensación de paz y tradición. Las figuras reflejan un enfoque estilizado y minimalista, adecuado para decoraciones navideñas contemporáneas.…
Elegant modular organizer for sachets and condiments, featuring a premium ribbed texture, smooth dividers, and a minimalist design that fits any kitchen or workspace. Printing Instructions No supports required. Set the Wall Generator to…
Encoder knob with separate base to choose yout colour. Four variations for better navigation at night. Tip: Print the Knob in TPU means more grip!
I made a drawer divider model for my larger bins, and I wanted one for my smaller parts bins too. Adding hexagonal holes reduced material usage by over 35% so I only created that model. If you really want one without holes let me know and…
Bota Matrioshka es un diseño STL compuesto por tres botas anidadas que se ensamblan de forma concéntrica, similar al concepto de una matrioshka, diseñadas con Designcenter Solid Edge . Cada pieza es hueca y encaja perfectamente dentro de…
I made this to clearly label dividers in a storage case. The dividers specifically fit this case I ordered from McMaster: https://www.mcmaster.com/4629T68/ The dividers require two parts for use, this way you can have labels on both sides…
Arbol de Navidad que cambia la luz en varios colores para armar esta pieza necesitamos contar con una bateria de 3V plana, un led RGB de cambio lento y papel aluminio. una ves impresa las piezas, tomar la pieza mas profunda y incertarle…
-Es una estrella perfecta para decorar el árbol de navidad y darle un toque especial. -Impresa en PLA, intentar utilizar algún color translucido, un blanco pero la variedad de posibilidades es muy amplia. -Lleva un orificio detrás para…
En este modelo de bola navidad uso dos dibujos para cada lado uno de corazón y otro de estrella
Como buen fan de minecraft y sabiendo en que fechas tuve que hacer este creeper de minecraft inspirado en el funko pop
El clasico reno Rudolf pero esta vez con un diseño low poly y mejorado para que se pueda hacer casi sin soportes
Made by me in SketchUp 2017. I really like these drawers, but they only come with one set of dividers. I have their other stackable units with the moveable trays and I wanted the best of both worlds. The sides, front, back, and middle…
Designed for 21x30cm and 15x20cm posters and secured to wall using 3M poster tabs. Risk of Rain 2 Wall Sticker WarHammer Wall Sticker Doom Wall Sticker Metroid Wall Sticker Assembly: The poster slides into the 0.5mm recessed slot of the…
Easy to print multicolor keychains, no need for AMS. Included brands: Nvidia, AMD, Steam, Discord and Epic Games PS. Example prints on the provided pictures were printed at a scale of 60.87% for Y and X axis and 100% scale for Z axis…
Tired of everything sliding to the deep-end of your Polaris 1500XD under-seat compartments? These custom-designed storage dividers solve the problem by creating two separated sections, so your gear stays secure and organized no matter the…
Turntable jig setup to allow for rotating photography, photogammetry, scanning and video of small items. The jig holds in place a 13.5cm diameter turntable (purchase on Amazon) and works in conjunction with the Iphone 16 Pro Max clicgear…
Summary Continued This model is designed for school classroom desk groups, and it can fit: Four test dividers Four TI-30X calculators Four rectangular erasers Four metal or plastic 12-inch rulers Ten wooden pencils Two scissors in varying…
Use a filament with high layer adhesion, such as PETG-CF, PETG or PP/PP-CF. PLA canot be used, it is not strong enough. For best results use these slicer parameters : 9 wall loops 20% sparse infill fill multiline 4 rectilinear outer wall…
Das Schild habe ich auf meinem Prusa XL mit den folgenden Einstellungen gedruckt: Material PETG Perimeter 5 Schichten oben 5 Schichten Boden 5 Das Schild ist 260x290 mm groß, kann jedoch auch kleiner skaliert werden.
Nvidia GPU support 70-120mm I inspired by https://allegro.cz/produkt/podpera-graficke-karty-nvidia-drzak-s-nastavitelnou-vyskou-70-125-mm-f25e6b5e-8f1d-4374-93cb-ffe712564d66?offerId=17501680800 Assembly: insert nvidia logo to main body…
This model simply prevents the contents of bins from mixing together. Specifically for 5x2 Gridfinity bins with 10x2 separate internal bins with labels and used within the Modern Case. I've only tested it with the snap in version of the…
This is designed to subdivide an existing gridfinity box. It will nest in the "efficient floor" boxes models generated by Gridfinity Extended ( https://gridfinity.perplexinglabs.com/pr/gridfinity-extended/0/0 and/or…
It's a part of my small directors monitor kit organization plan (you can see it on the last photo), but you can easily use it for a basic gridfinity setup because it uses a standart 42mm grid I have printed it with a 0.28mm layers for…
I created this to house the ends of the extension cables that I use for my multiple game consoles. I worked with ChatGPT on getting the controller ports right to fit the extension cables that I have. Then I took the model and cut it in…
Common Retail Hanger Color Chart Size Traditional Color Small (S) Green Medium (M) White Large (L) Yellow Extra Large (XL) Blue 2XL Orange 3XL Brown 4XL Purple 5XL Black 6XL Grey 7XL Maroon / Dark Red or print whatever colour you want
After receiving my BigTreeTech VVD/ViViD and printing the couple stls on their github, it became apparent that the stock filter access cover for their modified exhaust filter housing would not fit. This is a modified version of the stock…
Es una plantilla que indica donde están los botones en un microondas de Balay, que tiene el frente de cristal y ninguna indicación para personas invidentes. Se ha realizado para el modelo 3CG4175G3, pero vale también para el 3CG5172N2 y…
I added some dividers to use with @RNeese 's excellent Modular Storage System . Note that these are drawers only. You will need the body from the original model. I've uploaded only drawers with the added dividers; if you don't want any…
Print from TPU; I used 95A. The original gave no advice for settings, but I found it worked well with 3 walls and 25% cubic infill. At first I printed it with 2 walls but the inner side wasn't rigid enough and got loose. Enable "Avoid…
