355 modeli
Bean reservoir extension Philips 2200-5500 (Latte Go) series. Will increase capacity to approx. 500g (1/2 kg) or 1KG beans. Pre 2023 models: BEAN 1-4 : split version of the 500gr version BEAN_1_PIECE 1 : 500gr version in 1 piece…
Komori Planter | with reservoir A quiet evolution of the Kumiko planter. This is the new version of the Kumiko planter design, I wanted to explore a more understated form. With Komori Planter, I’ve moved away from the traditional footed…
To replace a broken washer fluid reservoir cap for a OPEL Astra J OPC and some other OPEL models ;-) Original Part No. 13227300 Just printed in PETG orange / black. To hold the cap down i insert two magnets (4,5mm x 1,5mm x 9,5mm). MMU…
Windshield Wiper Washer Fluid Reservoir Tank Bottle Cap (For Peugeot and other cars). Printed in TPU (230/50), without supports. Included Solidworks file for editing and customizing :) Print instructions Category: Automotive Summary…
I failed to find useable water station for bees, therefore I created this one. It's 130x130mm, with 114 hex-shaped platforms for insect to drink from. It's compatible with any PET bottle with standard top. I tested up to 0.7l big one and…
I wanted a simple storage solution for spare filament spools that utilizes the widely available IKEA Samla 22l Storage box with lid and keeps the filament dry during storage. To keep it as simple as possible, the spools can rest directly…
I created this Coolant Reservoir Cap to replace my broken one Thread: ISO M33x3 ⚠ Use PETG or a plastic that can withstand higher temperatures. BENEFITS: Fast to print Easy to use Perfect fit Designed for FDM Printing No support needed…
2nd variation of my original twisted planter. This time the planter is 270 degrees twisted compared to the original 60 degrees. A 3D planter with an integrated water reservoir. So that the planter can store acces water when you give the…
I have a Ford Focus 2012 (Hatchback) and after 9+ years of prolonged heat, the windshield wiper tank cap decided to disintegrate. I whipped this up it Fusion 360 and printed it in PETG. This cap may fit newer ford(s) vehicles. Update…
Update 07.01.2024: The thickness of the strap has been reduced. Now it bends easily. Created of a flexible material for Citroen C4 (2009, EP6) because I'm tired of buying plastic caps that always break. The landing size of the tank neck…
A 3D planter with an integrated water reservoir. So that the planter can store acces water when you give the plant too much water without drowning the plant. Thanks to the reservoir the plant will be able to get the water in when he needs…
I have a Ford Focus 2012 (Hatchback) and after 5 years of prolong heat the windshield wiper tank cap decided to disintegrate. I whipped this up it Fusion 360 and printed it in PETG. This cap may fit newer ford(s) vehicles. Print…
Standard Euro E20 thread. Started with another cap but the others had issues. So I made one from scratch. Needed a vent cut out and center protrusion for factory gasket support. Need to be a bit beefier to prevent cracking of the cap.…
My neighbour lost his cap on his 106 peugeot. I design it and install it, works fine, clips good on tank The flange is too hard but you have to smooth it with a lighter. I design with an hole but dont see on print, too small so i drilled…
A replacement water reservoir cover with a place for two 58mm or 58.5mm tampers. For the Gaggia Classic Pro. Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: Yes Resolution: 200 Infill: 15%, doesn't really matter…
Replacement cap for my reservoir on my 2014 Sierra. I printed mine in TPU for flexibility.
Useful for pressurizing the fluid reservoir, makes bleeding or a complete brake fluid flush a breeze. Main threads should fit most European brands (at least the internet thinks so) but I have tried it successfully with several Volvo's of…
Vous pouvez le pendre dans un arbre en l'accrochant au branches par les trois oreilles. Impression de préférence en PETG a défaut en PLA.
Modeled after the original cap to print a replacement for a BMW E39 from 1999. Print in heat resistant filament like ABS or PETG. Fits E30, E39, Z4, and other models. Print Settings Printer: Anet A8 Rafts: No Supports: No Resolution: 0.2…
To replace a broken washer fluid reservoir cap for a OPEL Astra J OPC and some other OPEL models ;-) Original Part No. 13227300 Printed in PETG The frame STL is identical to the original, only the lid has modifications.
Your mint died again because you forgot to water it… We all have been here many times. It's sad but you have to move on, speaking of moving on… Move yourself to your slicer and print this beautiful pot, i know you want it! (or at least…
My 2006 Fiesta windshield water reservoir cap just crumbled in my hand. So I decided to design and print my own. This is my third attempt: in the first one, I messed up the dimensioning a bit, second one went better and actually mounted…
3D model of a YpsoPump insulin reservoir holder — a custom-designed holder to securely store and organize YpsoPump insulin reservoirs. Features a compact and stable design with individual slots for easy access, safe handling, and…
I did a remix to be able to either replace the logo with whatever or print it with extruder 2 using another color. It worked out nicely. Also it is possible to print the cap itself with the flat top now facing the print bed. That way, it…
UPD. Infoced the version with icon. Designed a suitable and improved windshield washer reservoir cap model for BMW E30, instead of the one published by Exotechd. His design is very beautiful and concise, but unfortunately, it doesn't fit…
Print with TPU, 3 or more walls, 0.2mm layer
EDIT: Added 2 example pics with glass to demonstrate the hidden tank and the smaller tank auto-filling. I love my various ISO Stations and used similar plastic containers in college labs, but that was a long, long time ago.....and I have…
Hanger I made for drying my Camelbak Lobo 100oz/3 liter CRUX Reservoir. Print Settings Printer Brand: Monoprice Printer: Select Mini Rafts: No Supports: No Resolution: 0.21875 Infill: 22 Filament: Monoprice PLA+ Black Category: Sport &…
Washer fluid reservoir cap with griffing logo for saab 9-5 Tested on 1998 9-5, reservoir changes atleast on 2006 so this might not fit. There is two versions of this cap, one has a tighter fit and other looser. Print with supports logo…
25/02/2026 - It's been 4 years, but I've finally removed the rogue part from the underside of the model and updated the page. Apologies to anyone affected. Upgraded version of my original water reservoir cover for the Gaggia Classic Pro .…
I really do love this thing. Florida has a lot of flies. About 6 months after purchasing “it broke.” You know, as in, “no one knows who did it they just found it like that.” I've been keeping it attached with duct tape like a peasant. Now…
used for holding a water-cooling reservoir
This is a remix for mounting EK-Quantum Kinetic TBE D5 pump/res combo units. It has been shortened to allow the fittings to exit the rear along with relocated mounting holes for the standard bracket. I also thickened the vertical mounting…
Did you remove your fuse box from the engine bay and are now realizing that the oem coolant reservoir was mounted to that fuse box? Here is your solution!
With this tool, the oil change can finally be done without a big mess. Simply loosen the drain plug of the oil filter a little with a ratchet, then completely unscrew the screw with the printed special tool. The oil is completely…
Français: J'ai créé ce modèle de couvercle pour le bac à résine de mon imprimante GKTwo, car le couvercle d'origine était cassé. English: I created this lid model for the resin tank of my GKTwo printer, as the original lid was broken.
Simply Resized STL from the original to fit a Suzuki Splash 2014 (Probably fit swift as well)
Windshield washer fluid reservoir cap for a 2011 Volvo S40. Includes a very small vent hole in one of the portions of the icon. It fits very well on my S40. Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No Supports:…
The salt cap of Bosch (and other brands) dishwashers notoriously gets stuck because of solid salt forming below it. This spanner eases reopening the reservoir to fill with salt.
Clicks in, stays on. Print with supports Recommended materials - ABS, ASA, PETG or similar- PLA not suitable for engine bay use. Suitable substitute for 1250896 , 3M51 17632 AB etc. Tested on a Ford Galaxy Mk.II 2007
If your brake reservoirs crumple, you may be using an automotive brake fluid (dot 5.1) in your brakes. This will destroy them and many plastic things along the way. I learned the hard way. For these brakes, use mineral oil only. Hi, my…
Coolant reservoir cap replacement, compatible with Nissan Altima 2012
Update! I've added a bunch of 3mf beginning with “H2D” that's designed specifically for the BambuLab H2D--it uses the same settings as the “fancy” 3mf and contains a whole bunch of coins (equal amounts of each size) clustered around the…
Windshield cleaner water cup replacement. Print with TPU.
This brake reservoir cap was made for a Chrysler Pacifica, but may work with many other makes/models
S'imprime très facilement en TPU, pas de support. Paramètres utilisées: buse 0.4 10% remplissage 4 parois Jupe bordure non nécessaire
Insektentränke V2 Insektentränke mit Reservoire. Marmeladenglas, "Bonne Maman", Erbeere :-), 77.60 mm Aussendurchmesser, zzgl. Gewinde. Das Gitter lässt sich mit Justierschrauben auf die richtige Höhe einstellen. Achtung, die…
This is a replacement cap for your windshield wiper fluid reservoir. Fits the 2015 Mazda3, and probably many other models of cars.
I designed an adapter for NovoRapid Penfills to more easily fill the MiniMed pump reservoir.
I found this great design from https://www.printables.com/@Nordlicht and printed it for my IKEA box. but i use 1kg loose silica gel and the openings in the lid were a little too big for it. so i made small change. sorry, it's my first…
I reverse engineered the original cap which was broken at the joint. I tested with PTFE and TPU. - PTFE has a better fit and look , but fatigue is untested. TPU fits well and will last longer. Print with 3 walls - 15% infill Supports…
-- EN version -- VAG windshield washer fluid reservoir funnel (Volkswagen, Seat, Skoda, Audi...), 40 mm diameter. Printing instructions: Print with 100% infill. No need to use support if printed upside down. If you like this item, you can…
I printed it in PLA, 0.2 layer height, 3 walls, 5 bottom/top layers and 25% infill.
Windshield washer fluid reservoir cap I made to replace the ugly blue ones that come on the cheap aftermarket reservoirs on Amazon. Similar to this one:…
pas de vis bouteille coca cola / pepsi 1l /1.75l
I lost the cap for the windscreen wiper fluid reservoir of my Ford Focus 2011 Stationwagon, so I whipped up a new one to replace it. Probably best to print in PETG which is more resistant than PLA. Could potentially fit other reservoirs…
My wife wanted some hanging pots that held water better. This is a design I came up with for her and it has been working great.. This is the fat style I've also designed a thin style for ivy ans such. This one has a grill at the bottom to…
You can buy these guard from the UK (34€ + delivery), but it´s very expensive. So I made my own ^^ . The 3d model was only the prototyp (after two paper modells), that it fits propertly. I make it a bit stronger, so you can use it instead…
One of the reservoir caps got lost in a move and it's easy to splash water or cleaning solution when using the carpet cleaner without it. I'm still very new at making anything and this was made using TinkerCAD. I'm pleased that it's…
I needed a flat reservoir cap for my Honda Goldwing so that I could mount a phone holder on it. After I printed the first one I decided to put the Honda logo on it. Then I made one for both sides. This was designed for a 1997 Honda…
Hood mounted air reservoirs for USA Trains 1:29 scale NW2 locomotive. The tanks are 16mm polystyrene test tubes. I measured 100mm from the open end and cut off the bottom. There is a bit of a taper hence the 2 different sized caps and…
This is a cover for the brake fluid reservoir of the MT-07/FZ-07. It should also fit on the Mt-09/FZ-09.
I made this bracket for mounting an EK 200mm reservoir to a 120mm fan while using the fan pump mount. They don't include a way for you to secure their reservoirs to a fan out of the box. So I whipped this up so I could have a clean and…
Just a replacement washer fluid reservoir cap for a BMW E92. Insert included if you would like to print in a contrasting colour. Recommend printing upside-down, flat on the print surface. I know these are cheap to buy but “I can 3D print…
Easy to use 3 piece print with attachable water reservoir and removable seedling planters for drainage/replanting.
The design is meant to be used with M6 screws from the rack. It was originally printed in PLA, which turned out to be stronger than the original material. Update : The PLA did not withstand the stress, and I encountered difficulties…
Replacement cap for the brake/clutch system on the 4G Mitsubishi Eclipse 06-12. Mitsubishi OEM Part number is 4625A161. Apparently this will fit the Galant of the same generation. May also fit other brands/models so it may work for you…
This model is an insert for flowerpots that lift your plant, ideal to create a water reservoir, improve the drainage of your used substrate or levelling your plant in an oversized pot. For smaller size variation feel free to use the…
While lubricating the Z linear rail on the A1 Mini some time ago I discovered a serious problem. The oil eventually ended in the components parts due to its viscosity and also gravity. While I know most of the lubricating oils are not…
It is underground water reservoir for plants. I have been using a similar solution for years. But previously i have used hot glue with real funnel ;-) Now i have 3d printer so i have designed fast to print and cheap version, all in one.…
A remix of nielsie645 's excellent replacement water reservoir cover with print-in-place hinged lid . This integrates the stand for jkim_makes ' popular WDT tool .
BMW e30 Category: Automotive
Das Model ist entstanden um Parkinson Patienten dabei zu Helfen das Reservoir der t:slim X2 zu befüllen, da es sehr schwer sein kann mit der Nadel den Einfüllpunkt zu treffen. Dazu wird der Tank bei eingeklappten Zustand in die eine Seite…
I love my Philips Coffee machine but only the bean reservoir to small. Therefore i created a bigger one! This thing fits the Philips EP3550 Enjoy! Please donate and don't make money of this object!! (RESPECT THE LICENSE) Print…
This is a temporary replacement cap for the brake fluid reservoir on a Mitsubishi Pajero 4th generation (Montero/Shogun). I suspect this would work for other Mitsubishi cars. I have made this out of ASA, however I believe that brake fluid…
I designed this hook and oval “thing” to thoroughly dry out your Osprey hydraulics or similar hydration reservoir. To use, blow into the bite valve to clear out the hose and then dump the remaining water out of the reservoir. Insert the…
This is a lithophane of the card Gardevoir ex from Scarlet and Violet. Created with itslitho.com
Replacement cap for the brake fluid reservoir on a BMW E30 325iX as these are no replacements available any longer.
Print with TPU 95A.
I made this Mitsubishi ASX (2010) coolant reservoir cap because I broke mine and couldn't find it to buy. One should print this with heat resistant plastic, as the temperatures can get quite high in the motor chamber. Hope it helps!
Settings: 0,15mm layer - 0,4mm nozzle
Bouchon lave glace Peugeot 307, fermeture par aimant. A cliquer sur le tuyau du réservoir lave glace. Il faut 2 aimants d'épaisseur 2mm et diamètre 5mm. Un axe de diamètre 2mm et longueur 18mm. Print Settings Printer Brand: Creality…
I designed this extension for the bean reservoir of our Krups Evidence coffee maker so that it can take ore beans.
The following model is not an original idea, and is a clone of an extinct product no longer being produced. This hummingbird feeder uses an upside down glass bottle full of nectar as a reservoir. It's best to print the “Bottom Plate” in…
Liquid soap reservoir Mod for Karcher k7 Smart Control. Its a 3 part design and the top must be glued. It probably won't be watertight after printing so, apply varnish or epoxy resin inside and at its bottom. Requires about 15 to 20cm of…
Use cases : This is my creation of a grain tank extension for a SIEMENS EQ500 machine. With this addition you can put up to 1kg of coffee in the machine. Impression : PETG for food contact. Please give this design a like if you like it,…
A castle for plants with a resevoir in the back to allow for water storage.
Print “upside down”. There is a small flat area, no supports should be needed, but I would recommend printing with a decently sized brim. Should be printed in petg for food safety and strength
These models try to solve a problem with the transportation of the medical machine ResMed AirSense™ 10. The models serve as caps for the reservoir of the machine allowing to transport of said reservoir still with water, without spilling.…
The model consists of a water reservoir, a tray for the seeds and two different caps you can easily screw onto the tray. These caps either have, or don't have holes. You can choose which ones to screw on to match the water uptake with the…
This is a mount to fix a heatkiller pump/reservoir combo on a Watercool MoRa 3. You need to print one of each parts. The two bracket halves are held together by 2 M3x30 bolts. There is no hex nut needed, the thread should hold well in the…
I'm lazy, and I don't like to put my filament away. I wanted a way to keep the filaments loaded in the printer for weeks at a time without worrying about humidity, so I added a large desiccant reservoir to the box. Additionally, I moved…
This model allows mounting of the Iceman Cooler pump/reservoir combo onto the backside of the Ssupd Meshroom case. Unlike the ssupd marketing material, I chose to mount this onto the Horizontal PCI card slot by removing the existing…
My RSX came without the original bracket to hold the power steering reservoir in place. I designed this so that the reservoir will fit right into the slot similarly to the factory metal bracket. It doesn't have the “locking tab” of the…
This is a simple vertical stand for holding an EKWB EK-Quantum Kinetic TBE D5 upright while using it on a workbench or table. It should work with any D5-based EK-Quantum Kinetic pump/reservoir without any issues. Also created a radiator…
(en français plus bas) This is the little flower in the hummingbird feeder where the bird drinks the sweet nectar. If the ones in your old feeders have gone bad or a nasty woodpecker has stolen them, there's no need to buy a new feeder.…
Needed to upgrade watercooling setup for couple of my PCs and thought that why not design my own reservoir? So this is the first design and I printed couple of these using PETG and Filaflex for gaskets. Designed for immersive pump, Im…
I present a simple reservoir mount, it was created with an 120mm fan in mind, using printer friendly parts. The ring styled mount is designed for a 60mm tube. I've used simple black PETG from Eryone. printed at - 0.15mm height - 15%…
If your brake reservoirs crumple, you may be using an automotive brake fluid (dot 5.1) in your brakes. This will destroy them and many plastic things along the way. I learned the hard way. For these brakes, use mineral oil only. Hi, my…
