Wyniki wyszukiwania: vort

Sortowanie

567 modeli

P
PrintablesTsaro

Frankford Arsenal Tumbler Vortex Cone

Adding a cone like this to the center increases vortex action and cleaning efficiency. Similar concept to the commonly used funnel mod. Printed in PETG with 3 perimeters for strength, though printing in TPU would make for better…

Wydruk około 5,06 €–6,18 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
258
Polubienia
24
Ocena
0
P
PrintablesMADAO

Vortex funnel (Vase mode).

10 cm total height, 20 mm lower part diameter. Made to fit standard water bottle, but feel free to resize and cut it. Print in vase mode, use 0 bottom layers. 0,6 mm nozzle, 0,8 mm wall thickness.

Wydruk około 0,75 €–0,92 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
110
Polubienia
19
Ocena
5
P
Printablesmach

Vortex Solo 8x36 Reflection Guard

Simple Solar reflection guard for the Vortex Solo 8x36 monocular.

Wydruk około 0,18 €–0,22 € nettoWstępna wycena jednego wariantu

Pobrania
110
Polubienia
10
Ocena
5
P
PrintablesRicardocab

Tamiya 23ml Paint Adapter For Vortex Mixer

This is an adapter for Tamiya 23ml paint bottles. It will allow the use of regular Vortex Mixers.

Wydruk około 1,18 €–1,44 € nettoWstępna wycena jednego wariantu

Pobrania
53
Polubienia
9
Ocena
4
P
PrintablesRicardocab

Tamiya 10ml Paint Adapter For Vortex Mixer

This is an adapter for Tamiya 10ml paint bottles. It will allow the use of regular Vortex Mixers.

Wydruk około 1,02 €–1,25 € nettoWstępna wycena jednego wariantu

Pobrania
51
Polubienia
11
Ocena
4
P
PrintablesRicardocab

Tamiya 10mm Vortex Adapter V2

I created this adapter since Tamiya and Mr. Hobby paint bottle's are to wide. This adapter keeps the bottle centered in place and creates an excellent vortex in the bottles. Tested to 3,000 RPM!

Wydruk około 1,08 €–1,32 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
37
Polubienia
9
Ocena
0
P
PrintablesRicardocab

Tamiya 23mm Vortex Adapter V2

I created this adapter since Tamiya and Mr. Hobby paint bottle's are to wide. This adapter keeps the bottle centered in place and creates an excellent vortex in the bottles. Tested to 3,000 RPM!

Wydruk około 1,28 €–1,56 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
33
Polubienia
6
Ocena
0
P
Printablesrafalr

Vortex Crossfire Cap

Simple cap for Vortex Crossfire, it rescaled it a little bit to fit better on my Vortex Collimator

Wydruk około 0,18 €–0,22 € nettoWstępna wycena jednego wariantu

Pobrania
24
Polubienia
4
Ocena
0
P
PrintablesJoKa

Vortex attachment for falcons and microcentrifuge tubes

The vortex genie 2 in my lab has a special attachment which made it difficult to vortex microcentrifuge tubes and use it for the brief vortex of conical falcon tubes. So I designed this attachment to tape it on top of the original…

Wydruk około 0,56 €–0,69 € nettoWstępna wycena jednego wariantu

Pobrania
12
Polubienia
1
Ocena
0
P
PrintablesGlennovitS 3D

Helix Space Rocket (fidget vortex spinner toy)

Welcome to GlennovitS3D. Join the Club on Printables.com to support creation of new models , get access to exclusive models , and get commercial rights, to sell prints. Join today - GlennovitS3D - or check out my model collection or my…

Pobrania
16 407
Polubienia
2433
Ocena
4,62
P
PrintablesMaster Printer

The BEST Impossible Vortex Passthrough

What makes it special Of everything I have printed and designed, this vortex passthrough still stands out to me. The design is easy, it is very functional, and it uses a low amount of filament. Print settings Infill: 0% - there is…

Pobrania
9744
Polubienia
803
Ocena
4,67
P
PrintablesIdea2Item

Impossible Passthrough Pyramid and Cone style hourglass (Dubbel Size also!) Helical Fidget vortex

Just another impossible spiral design. I wanted an hourglass style cone and a longer one so drew normal hourglass cones and pyramids as well as dubbel length versions ;-) I'd love to see some makes ;-) Printer settings I used: PETG 0.4mm…

Pobrania
9663
Polubienia
684
Ocena
4,69
P
PrintablesThesBer

Valentine Heart Spiral vortex illusion fidget - now v1.4

💕 Valentine Heart-Love is in the air! 💕 Imagine a heart made of two parts that twist elegantly into a spiral – yes, you simply twist it together! This creates a magical vortex effect , making the heart an unforgettable design. Perfect for…

Pobrania
6063
Polubienia
773
Ocena
4,72
P
PrintablesMadMaxx425

Beerenwaschmaschine mit Strudeleffekt / Berry Washer with Vortex

Inspiriert von vorhandenen Beerenwaschschalen – dieses Modell wurde vollständig neu konstruiert und besteht aus nur einem Teil. Zum Einsatz einfach ins Spülbecken stellen und Wasser einfüllen. Dabei entsteht ein Strudel, der die Beeren…

Pobrania
5289
Polubienia
934
Ocena
4,83
P
PrintablesRyGuy Design

Vortex Spiral Fidget (V2)

A beautiful vortex fidget I designed in Fusion 360. I recommend printing it in two colors for cool contrast.

Pobrania
3671
Polubienia
241
Ocena
4,83
P
PrintablesMaster Printer

The BEST (Square Pyramid) Impossible Vortex Passthrough

What makes it special I made this one as my favorite shape in the BEST impossible vortex passthrough series. It is a square pyramid, and it comes in two parts. The inner piece slides through the outer piece, twisting as it goes. That is…

Pobrania
2593
Polubienia
182
Ocena
4,9
P
PrintablesRJ Design

V2 - Tall Mini Impossible Vortex Passthrough (not stackable)

The Design Here's a new Tall mini version of the impossible passthrough! Fully Compatible with the V2- Mini Vortex Thread (see end of gif) The “male” part of the thread seems to defy physics by passing through the slightly larger “female”…

Pobrania
2484
Polubienia
361
Ocena
4,67
P
Printables3DPrintDemon

SV06 PLUS Vortex V2 Adjustable Cooling & LED System

…Please be sure to hit like & post a make, I'd love to see your prints! Here's the SV06 PLUS Vortex V2 system with adjustable height for use with either the Sovol stock nozzles or regular Volcano nozzles. Also this attachment method…

Pobrania
2479
Polubienia
409
Ocena
5

Vortex Sprinkler – No Moving Parts

3D Printed Vortex Sprinkler – No Moving Parts, Ready to Use This innovative sprinkler is designed for hassle-free use straight off the 3D printer. No assembly or post-processing required. With a smart, print-in-place design and zero…

Pobrania
2262
Polubienia
501
Ocena
4,88
P
PrintablesKen Mills

Coin Vortex Piggy Bank

Enjoy the mesmerizing spinning journey of coins as they make their way into the bottom of this hyperboloid coin bank. The ramp simply snaps snuggly onto the vortex rim. Lay a coin flat at the top of the ramp, release and enjoy. Prints…

Pobrania
2238
Polubienia
317
Ocena
5
P
Printablescryptomilk

Vortex Fruit Washer (Improved)

I like the vertex fruit washer from Perinski , but it requires support for nearly the complete bottom. This model is a fixed version. It requires minimal support and prints nicely. If you wonder if this really works, it does. Kids love…

Pobrania
1925
Polubienia
234
Ocena
5
P
PrintablesRJ Design

Vortex Shift Passthrough

The Design After something different? Here we have the Vortex Shift! This is the most confusing and satisfying yet! Whilst i designed this some months ago i took some time to refine it and get it perfect. Import note: Whilst fully…

Pobrania
1828
Polubienia
346
Ocena
5
P
Printablessquinn

Coin Vortex Mason Jar Lid

Attach this to the top of any standard mason jar, and then enjoy sliding multiple coins down the ramp - watching as they accelerate towards the apex of the vortex. Printing Notes: This is an easy print that requires no supports. The STLs…

Pobrania
1782
Polubienia
738
Ocena
4,94
P
PrintablesXevis

Spiral Fidget Toy - Vortex Passthrough

Get ready to relive your childhood dreams with this super fun, kinetic spiral toy! This updated version of the classic Stackable Impossible Passthrough adds an exciting new twist - you can now place a spring (like one from a ballpoint…

Pobrania
1772
Polubienia
147
Ocena
3
P
Printableseyalshtark

Decorative Vortex Cubes

Unlike most Vortex Passthrough models where the vortex part is inserted vertically. Here the Vortex Part is inserted diagonally through the corner, making it a more challenging print. After some prototyping and many failed prints i…

Pobrania
1671
Polubienia
415
Ocena
2,67
P
PrintablesRadu Martin

Vortex Bottle Connector - Tornado in a Bottle

Vortex Bottle Connector - Tornado in a Bottle this is a standard pet bottle connector and demonstrate a vortex in your classroom! Show that in order for water to flow down, air must flow up. These amazing connectors screw onto two plastic…

Pobrania
1606
Polubienia
137
Ocena
4,83
P
PrintablesRyGuy Design

Vortex Spiral Fidget (V1)

A beautiful passthrough vortex fidget I designed in Fusion 360. I recommend printing it in two colors for cool contrast. Category: Toys & Games

Pobrania
1162
Polubienia
69
Ocena
5
P
Printables3D KIMBA

Vortex Beach Blast: The Ultimate Floating Game for Water Fun!

Vortex Beach Blast: The Ultimate Floating Game for Water Fun! Thank you to PCBWay for reaching out and sponsoring this project:

Pobrania
1128
Polubienia
618
Ocena
4,83
P

Coin vortex as a Piggy bank

23.11.2023 Update: BASE_SMALL V2 added - walls are now 2 mm thick instead of 1 mm 20.11.2023 Update: VORTEX V2 - smaller, steeper and has the insert directly connected BASE_SMALL - reworked - wider walls and smaller radius at the bottom…

Pobrania
1096
Polubienia
278
Ocena
4
P
PrintablesBugman_140

VORTEX

Here is the File for my Vase Mode print "VORTEX" I suggest printing it is something Shiny or Glittery for best effect. I hope you Enjoy If you like what I am doing please consider buying me a coffee or tipping. 😁👍 Buy me a coffee

Pobrania
1075
Polubienia
198
Ocena
4,94
P
PrintablesDT3D_PRINT

Vortex Passthrough Spiral Illusion Toy

Vortex Passthrough Spiral Illusion Toy - Print with standard settings and no support. - Maybe adjust speed towards the end layers so PLA can cool down for next layer - No rafts needed https://youtube.com/shorts/neRQSKVJz6s?feature=share

Pobrania
1058
Polubienia
57
Ocena
5
P
PrintablesThetg

Impossible Vortex Passthrough Fidget toy

Cool fidget toy i designed myself, print without brim so you dont have to clean up later

Pobrania
1040
Polubienia
83
Ocena
5
P
PrintablesWim V

Fidget Vortex Sphere

I designed this version of a Vortex Fidget Toy to have something other than the taper shaped ones. Printed with 0.4 - 0.2 layer, I used support on buildplate for part 1. Scaling up will also enlarge clearance. (base model has clearance of…

Pobrania
990
Polubienia
156
Ocena
2,5
P
PrintablesRJ Design

Suspended Hand Vortex Remix

The Design I've remixed the amazing suspended hand by taking the suspended filaments and giving them a twist, literally! It changes the affect from an obscured hand in mist, to a hand reaching out from a vortex. This looks great and shows…

Pobrania
924
Polubienia
139
Ocena
5
P
PrintablesStuart800

Vortex Tube

Thanks to benkrasnow for the original Vortex tube and Hannes_v_d_B for the changes. In the vortex tube, compressed air is brought into opposite spiral movements at high speed. This causes the air to split into a warm and cold air stream,…

Pobrania
841
Polubienia
51
Ocena
5
P
PrintablesTasteofCustom

TOWER POT — the Vertical Dirt Vortex of Botanical Brilliance

🌪 TOWER POT — the Vertical Dirt Vortex of Botanical Brilliance™ Got dirt? Got seeds? Got zero space? STACK. IT. UP. This isn’t just a pot. It’s a freakin’ skyscraper for your basil. A luxury condo for your strawberries. A vertical farm…

Pobrania
808
Polubienia
455
Ocena
5
P
PrintablesBigFootPL

Throw lever for Vortex Diamondback Tactical 6-24x50 FFP

Zoom throw lever for Vortex Diamondback Tactical 6-24x50 FFP Probably works with some other Vortex scopes. I redesigned a bit the zoom throw lever by NJ_v_N. Added 3mm threaded insert, elongated the lever. Print Settings Printer: Printo3D…

Pobrania
800
Polubienia
92
Ocena
4,67
P
PrintablesMaster Printer

The BEST Spiral Impossible Vortex

What makes it special A smooth, satisfying spiral fidget in a modern cone shape. It is a super easy print, and it is fun to watch the two spiral parts come together. Try different color schemes to change the look completely. This type of…

Pobrania
769
Polubienia
40
Ocena
4,8
P
PrintablesThesBer

Small Heart Spiral vortex illusion fidget - New v2.1

💕 Small Valentine Heart – Elegance in Miniature! 💕 Imagine a heart made of two parts that twist elegantly into a spiral – yes, you simply twist it together! This creates a magical vortex effect, making this new small version an small…

Pobrania
754
Polubienia
106
Ocena
5
P
PrintablesWizRed

Vortex Cube Spiral Fidget

Similar to the Spiral Hourglass, but in a cool cube shape! Easy to print and fun to play and fidget with, overall a great design. Might need to fidget with it a bit for a smoother slide. Taken from 'makerworld.com' by 'RJ Design'.

Pobrania
737
Polubienia
46
Ocena
0
P
PrintablesCrazy3D

Vortex Christmas Bauble for single extruder!

A elegant vortex style crystmas bauble. You can print both parts seperate with your single extruder printer and assemble it together. That means that you have the two color look without the material waste of a multi filament system! I…

Pobrania
705
Polubienia
182
Ocena
5
P
Printablesfiretech

Pass-through Vortex Christmas Tree Fidget/Decoration

A conical pass-through vortex fidget toy I printed a while ago brought a Christmas tree to mind. It just needed a topper, and some tweaks to the shape. Feeling inspired, I opened Fusion, and this thing was born. I had initially intended…

Pobrania
671
Polubienia
92
Ocena
5
P
Printables3DPrintDemon

Vortex System For Biqu H2 V2 & Sovol SV01 PRO

This is the all new Vortex System to mount the Biqu H2 V2 extruder on the Sovol SV01 PRO, OG SV01 & SV03! Equipped with twin spiralling air ducts for powerful effective airflow directly to the area below the nozzle! . EDIT: Now with V2…

Pobrania
665
Polubienia
110
Ocena
4,89
P
PrintablesKijai

Vortex Keep

The towering structure is heavily based on the wonderful "White Tower" drawing by SnowSkadi . The base is my original idea. This print comes in 3 pieces, no supports required.

Pobrania
663
Polubienia
225
Ocena
4,6
P
Printableshakrulz

Vortex Spiral Fidgit

Fun and Satisfying

Pobrania
657
Polubienia
27
Ocena
5
P
PrintablesThesBer

Christmas Tree double vortex illusion v2.1 - single extruder

Ho Ho Ho! 🎄 Imagine a Christmas tree made of not just two but three parts , each twisting into the other to create a double vortex illusion – yes, it’s twice the magic! The twisting motion makes this tree look absolutely mesmerizing and…

Pobrania
607
Polubienia
104
Ocena
4,83
P
PrintablesThesBer

Christmas Tree vortex illusion v1.4 - single extruder / color

Ho Ho Ho! 🎄 Imagine a Christmas tree made of two parts that twist into each other – yep, you twist it into place. This creates an impressive vortex illusion , making the tree look almost magical. Caution: The illusion is so captivating,…

Pobrania
566
Polubienia
83
Ocena
4,6
P
Printablessideeffect001

Vortex Connector (Water Bottle Tornado)

I started with the bottle threads from https://www.printables.com/model/155891-pet-bottle-water-pipe-quick-coupling and drew a vortex connector around them. It works well and seals pretty well too.

Pobrania
538
Polubienia
49
Ocena
5
P
PrintablesMatt Boyer

Vortex Hex

A 6" twisting hexagon spire. You can print both parts individually, or merged. Don't scale it down too much or the gaps won't slide. I printed my final prototype on a 4 yr old MK3 w/ .6 nozzle. It was printed as a merged print-in-place…

Pobrania
525
Polubienia
37
Ocena
0
P
PrintablesEncrust3d

Ecotech Vortech MP40 / MP10 Power Supply Mount

This is a mount for Ecotech Vortech MP40 and MP10 power supplies to be mounted on the wall to ensure if a tank leaks, the electronics will be protected. Printed in PETG.

Pobrania
511
Polubienia
25
Ocena
4
P
PrintablesColton Gamble

Infinite Vortex Spiral Cone

Here is my version of the Vortex Spiral Cone

Pobrania
511
Polubienia
25
Ocena
5
P
PrintablesBosco Lau

Vortex - Ender 3 Cooling Fan Duct with Magnetic Mount

Vortex - A minimalist style Ender 3 5015 part cooling and 2510 or 3010 hotend fan duct with easy to install magnetic mount. Compatible with separate CR touch mount. Minimalist, compact and flexible design. This design has considered easy…

Pobrania
509
Polubienia
126
Ocena
5
P
PrintablesMaster Printer

The BEST (Circle) Impossible Vortex Passthrough

What makes it special I made this circle version because the BEST impossible vortex passthroughs are my favorite designs to print and play with. The shape is simple, it uses a low amount of filament, and the two pieces fit together…

Pobrania
502
Polubienia
51
Ocena
5
P
PrintablesTanner Farley

Vortex Killflash & Scope Cap

Requires small length of shock cord & Ranger Band (if shock cord collar isn't used). Shock cord collar requires (1) M3 nut & (1) M3x6-8 bolt. Notes attached to models for scope compatibility.

Pobrania
482
Polubienia
47
Ocena
0
P
PrintablesDT3D_PRINT

Vortex Passthrough Spiral Illusion Toy Cylinder 2 SIZES

Vortex Passthrough Spiral Illusion Toy SIZE LARGE - H110mm x 52mm Diameter SIZE SMALL - H67mm x 36mm Diameter - Print with standard settings and no support. - Maybe adjust speed towards the end layers so PLA can cool down for next layer -…

Pobrania
475
Polubienia
43
Ocena
5
P
Printableseyalshtark

Extra long vortex tube and ball

A very long vortex tube with spinning ball. Printed to the height limits of the Prusa MK4. No supports needed for the tube, only a brim. Supports needed for the ball. Lower the print speed to 70- 60% for the top third of the vortex tube.…

Pobrania
444
Polubienia
46
Ocena
4,6
P
PrintablesJoris Calvat

Berry Vortex – Fruit Rinsing Bowl

Berry Vortex is a 3D printed fruit rinsing tool designed to make washing berries and small fruits easier and more efficient. The idea behind Berry Vortex is simple: instead of only spraying water onto fruits, the fruits remain immersed…

Pobrania
443
Polubienia
151
Ocena
5
P
Printables3DPrintDemon

Vortex V2 Parts Cooling System for BIQU H2 V2 Series 5015 Fan

…Please be sure to hit like & post a make, I'd love to see your prints! The Vortex V2 high performance parts cooling system for the Biqu H2 V2 series. Print in PETG at 0.2mm layer height. Orientate the ducts as per the cover photo, print…

Pobrania
425
Polubienia
46
Ocena
5
P
PrintablesXDGunFire

Loc-Line Advanced Flow Vortex Eductor ½" & ¾"

Increase the flow in your aquarium with this Loc-Line Advanced Flow Vortex Eductor ½" & ¾". This will make a great random flow in your reef tank. I also used this in my salt mixing tank. Works great! I used tree supports to support the…

Pobrania
425
Polubienia
31
Ocena
5
P
PrintablesJ Lake 3D

Air Vortex Generator for Cars and Trucks

Just use double sided tape and you should be good ;) Approximately 2mm thick everywhere. UPDATE 1: Included a mold if anyone wants to make it that way. Category: Automotive

Pobrania
416
Polubienia
34
Ocena
5
P

Parametric Vortex Wall Sculpture

The set includes 91 unique files, each piece labelled with a number to help with identification. You may refer to the position guide for correct placement, or if you want you can position the pieces however you like forming a different…

Pobrania
412
Polubienia
196
Ocena
5
P
Printablesjancux

SV06 PLUS VORTEX Mount Screw

Need 23mm M3 screws to not damage the mainboard.

Pobrania
381
Polubienia
35
Ocena
5
P
PrintablesShikko

Vortex design - wall sculpture

This is a vortex design wall sculpture which can be 3d printed individually and assembled using screws or super glue . No supports needed . Inspiration by https://www.youtube.com/@HerschelShapiro If you like my 3D models. Please consider…

Pobrania
379
Polubienia
201
Ocena
5
P
PrintablesMichael S

Handle for InstantPot Air Fryer Vortex 6

Replacement handle for InstantPot Air Fryer Vortex 6. Printed using PLA on a MINI. Instructions for replacement. Remove the 3 screws holding the basket to the front cover. Remove the 3 screws holding the handle to the front cover. Change…

Pobrania
378
Polubienia
21
Ocena
5
P
PrintablesMaster Printer

Pointless Passthrough Octagonal Vortex (The BEST Series)

What makes it special The rounded corners are what I notice first when I pick this one up. There are nearly no sharp points on it at all, and that soft edge is the whole point of the pointless version. It sits in the BEST series alongside…

Pobrania
376
Polubienia
40
Ocena
4,5
P
PrintablesChris Marzano

Ecotech Vortech Pump Controller Mount

Mount for the Ecotech Vortech MP10/40/60 aquarium pump controllers. Great for screwing or gluing to your tank stand to keep the controller and its wiring out of the way. Does the same thing as the factory mount but costs you pennies…

Pobrania
367
Polubienia
10
Ocena
5
P
PrintablesSpradlinb

Vortex Spiral Fidget Sphere

This is a quick adjustment of the Vortex Spiral Fidget model to split the interior piece into three spheres. It can be printed without supports. Three stacked together is just slightly taller than the origial interior piece.

Pobrania
363
Polubienia
33
Ocena
4,75

Vortex Vases

Two vases unique vases to decorate your home with. Category: Decor

Pobrania
358
Polubienia
60
Ocena
5
P
Printablesschleprocker

Vortex Mixer Paint Shaker for Drill - Vallejo/Army Painter/etc Bottles

Took inspiration from this Vortex Mixer and modified its parts to fit my hand held drill instead to mix my miniature paints, vallejo/citadel/army painter/etc. https://www.thingiverse.com/thing:534894 This requires two hands. One to hold…

Pobrania
354
Polubienia
60
Ocena
4,6
P
PrintablesBugman_140

Squirrel Vortex aka Steve

Here is the file for the Squirrel Vortex aka Steve As named after taking suggestions on twitter then letting @MenacesMum pick her favorites 😁 This model prints in FDM with zero supports and has also been successfully tested in Resin. I…

Pobrania
353
Polubienia
64
Ocena
4,67
P
Printablesiqless

Quad Vortex Passthrough OpenScad

I wanted to fiddle with a nested vortex design. After little bit of work I came up with this 4x nested vortex all done in OpenScad

Pobrania
351
Polubienia
97
Ocena
5
P
PrintablesTanner Farley

Vortex Throw Lever

Requires M4 nut and M4*16 bolt. https://www.amazon.com/gp/product/B07HVRJW5J/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1

Pobrania
350
Polubienia
33
Ocena
0
P
PrintablesBrad @ FTBT 3D

Jumbo Coin Vortex Mason Jar Lid

I loved the coin vortex by @squinn but I wanted to make it bigger. Unfortunately you can't scale this model since it has threads on it. So I remodeled it in Fusion and maxed out the bed of a BambuLab printer (256x256x256). Ended up being…

Pobrania
345
Polubienia
98
Ocena
5
P
Printablesfutureconstruct

Testors Paint Vortex Mixer Spinner Shaker Drill Attachment

Stirs up the paint in a few seconds (ok, depends how old your paint is lol) Intended to be “pulsed” a few times so that acceleration and deceleration mixes the paint, along with the bottle being square. Printed in 31 minutes with my 0.6mm…

Pobrania
344
Polubienia
64
Ocena
4,33
P
Printablesgigiga

Beyblade arena leg (Hypersphere Vortex Climb Battle Set (E7621))

My son wanted to sell his Beyblade stuff, and one leg of this arena was missing, and I thought lets waste time to remodel that thing. Lucky me one of the legs remained and I could use it as a measure model. It fits perfectly and was fun…

Pobrania
335
Polubienia
27
Ocena
5
P
PrintablesIcyPenguinCube

Spiral Vortex Fidget Pyramid Passthrough

I recommend printing with 0.16mm layer height, and I enabled variable layer height for my print.

Pobrania
305
Polubienia
17
Ocena
0
P
PrintablesHyperfluff

Vortex Sparc 2 Killflash

This was Designed and Printed for my Colleague. Its a Killflash insert for the Scope Cap thats just a push in fit. Designed in Tinkercad, Open on Tinkercad License: CC BY-NC-SA 3.0

Pobrania
305
Polubienia
17
Ocena
0
P
PrintablesDmitriy Sorokin

Vortex Sprinkler with Quick Garden Hose Connection

Was added the quick connector for garden hose. Second file contains the update of sprinkler for lower pressure. If you choose lower-pressure, please improve infill, standard 15% is bad, it will have the holes in the different places. The…

Pobrania
282
Polubienia
29
Ocena
4,5
P
PrintablesMarshalliom

Vortech MP10 Guard

Push fit MP10 Vortech guard/cover to protect your Nems. Designed from scratch due to losing an anemone from a guard that didn't also cover the face of the powerhead. For best results print face down using PETG, no supports etc required.

Pobrania
282
Polubienia
11
Ocena
0
P
PrintablesOmpapamowmow

INTLLAB Vortex Mixer Adapter

I purchased the INTLLAB vortex mixer to mix the paints I use for my miniatures. The shape of the mixer's top plate works well if you mix your paints cap-down, but it's hard to keep the bottles in place when they are upright. I've…

Pobrania
277
Polubienia
38
Ocena
5

Impossible Tomoe Passthrough Vortex Fidget

Rather small model with forgiving tolerances so most printer should be able to print it. Should print fine at 0.20mm. Please share your makes.

Pobrania
275
Polubienia
25
Ocena
0
P
PrintablesMaster Printer

Extraordinarily-Wide Impossible Vortex

This is a great vortex model that is really fun to fidget around with! This is a great print that is really fun to show all the wonders of 3D printing! Its a pretty easy model to print, but if you have a printer 7 years or older, you…

Pobrania
269
Polubienia
24
Ocena
5
P
PrintablesCamelY0

Ecotech Vortech MP10 Anemone Safe Replacement Guard

When printed, I filled the internal with supports for the front cover. Supporting the front cover seems easier than supporting the 3 cubes that hold the guard onto the wetside due to the triangular shape of the cage.

Pobrania
258
Polubienia
14
Ocena
0
P
PrintablesCantareus

Customizable Vortex Cannon

Vortex cannon that shoots rings of air. Customize in OpenSCAD to experiment with different sized openings. Includes baffles to prevent children from using them to shoot hard object with them. Use an 18" balloon to fit the STL file we've…

Pobrania
253
Polubienia
19
Ocena
4

Vortex Venom Picatinny Riser

1/3 co-witness riser for the Vortex Venom red dot sight. 5 slot picatinny riser that can be used to raise any compatible device 0.6 inches. Requires the following hardware: 1: 1 inch #8-32 button head screw or similar 1: McMaster-Carr…

Pobrania
243
Polubienia
19
Ocena
0
P
Printables3DPrintDemon

Vortex V2 Linear Rail System Sovol SV01 PRO Biqu H2 V2

…Please at least be sure to hit like & post a make, I'd love to see your prints! EDIT: Updated X belt adjuster block & slider models! Big improvement. EDIT: Now with V2 Ducts!! Here is the new Vortex V2 Linear Rail X system for the Sovol…

Pobrania
237
Polubienia
36
Ocena
0
P
Printablesokuyuki

Vortex Geometric Wall Art (Modular)

Vortex Geometric Wall Art is a work of art that plays with the perception of space and depth. The artwork consists of four identical pieces that can be joined together to form a three-dimensional structure. The illusion of an infinite…

Pobrania
232
Polubienia
166
Ocena
5
P
PrintablesMaster Printer

Skinny Men's Impossible Vortex Illusion

This is a great model that has been very popular in recent weeks, so I thought to add multiple iterations of it to make it more thrilling. * Also important note, whenever your removing the file from the print bed make sure the bed has…

Pobrania
232
Polubienia
21
Ocena
4
P
PrintablesMaster Printer

Stylish Impossible Vortex Pass-Through

This is a great model to use and fidget around with that is fun to print and you can create a lot of fun color combinations that can enhance the cool illusion! I would recommend printing in colors that differ from each other so then it…

Pobrania
231
Polubienia
14
Ocena
0
P
Printables3DPrintDemon

The Vortex GEMINI High Speed Curtain Fan System X Gantry Mounted For SV07 & MANY More!

…Please be sure to hit like & post a make, I'd love to see your prints! The Vortex series grows with Gemini! Print faster with crisper cleaner looking prints! These lightweight mirrored modular pods each carry a powerful 24v 6020 fan that…

Pobrania
229
Polubienia
76
Ocena
5
P
PrintablesMatt Wilde

Ecotech Vortech MP controller wall mount

Remix of thing 39998326. Has the slide available for easy leveling on the wall. However when tightening the screws down they kept moving for me. I put a 4 pack of them together for my tank and you just have to level it and toss 2 screws…

Pobrania
220
Polubienia
12
Ocena
0
P
PrintablesChrisfu

Bottle Connector for Swirl / Vortex / Tornado in a Bottle

This bottle connector allows you to join two plastic bottles together, creating an exciting vortex effect. Fill one bottle with water, attach the connector, and invert the bottles so the water-filled bottle is on top. Shake it, and watch…

Pobrania
219
Polubienia
40
Ocena
5
P
PrintablesMrConductor10

Vortex 2 Probe

A vortex 2 probe model I made. Scale to your liking. It may be too small for some fdm printers.

Pobrania
214
Polubienia
5
Ocena
0
P
PrintablesSean Liang

Impossible Vortex Passthrough – Christmas Tree Snow

I was exploring Impossible Passthrough structures and decided to turn the idea into a Christmas-themed piece. The core looks like a delicate snowflake, and the side reveals the profile of a Christmas tree. When I designed it, I definitely…

Pobrania
211
Polubienia
28
Ocena
5
P
Printablesrookie07

Vortex Extruder Knob

Extruder knob, fits standard stepper motor. If it's a bit tight of a fit, soften the print with hot water before quickly drying and fitting. Can mirror in your slicer software to alter vortex direction if desired. Remix from thingiverse…

Pobrania
208
Polubienia
22
Ocena
4,67
P
PrintablesBenevolensky

Scope Throw Lever for Vortex Strike Eagle

This is a remix of @JahnRoux Throw Lever, redesigned for the Vortex Strike Eagle 1-8x24. It's adjusted in inner diameter and grove count to provide a perfect fit for the magnification ring. Fits like a glove, perfect snug fit! Same…

Pobrania
204
Polubienia
25
Ocena
5
P
PrintablesAWSW

Impossible Vortex Screw Cube

Impossible Vortex Screw Cube I needed to try one of these too. =) Printing instructions: 0.2 speed profile No brim No supports Textured sheet used Happy printing =)

Pobrania
204
Polubienia
16
Ocena
5
P
PrintablesKoosh

Vortex Optics AMG UH-1 Anti Reflection Device

I printed this with a .25mm nozzle on the prusa MK3.5 It was pretty stringy so either printing with a .4 nozzle may work better but the hexagonal lines wil be a bit thicker. Print in the standing orentation with the clips facing up.…

Pobrania
194
Polubienia
18
Ocena
2
P
PrintablesMarius Mihasan

Vortex Genie 2 Attachments for bead beating

This is a remake of the original Vortex Genie 2 Attachments by hisashin found on http://www.thingiverse.com/thing:3528209 . It will fit Eppi"s and 2 ml vials. Printed this and used it for the bead beating step in the DNeasy UltraClean…

Pobrania
191
Polubienia
6
Ocena
0
P
PrintablesDanB

Vortex Strike Eagle Scope Parallax Wheel.

Vortex Strike Eagle 5-25x56 Parallax Wheel. ID of wheel is 35.35 mm. Hardware required: 4-40 x .375 Socket Head Bolt and 4-40 nut. Filament: Prusa Black PETG

Pobrania
183
Polubienia
14
Ocena
3