Liczymy pasujące modele…
Remix originally from Thingiverse: 1363148 (I think). Scaled up and bottom chopped off slightly for better printability. Has 2 holes for 8mm round magnets 3mm thick.
Mushroom Shelf magnet with 6x3mm magnet holes
I loved the original and wanted magnets that were hidden and a pause to add some more colour to the print... I printed in Bronze silk then Rainbow silk to get the colour. 1st pause in the print is at the top of the magnets. At the pause,…
This is a remix of a very nice design, but updated to improve on a few things: Mounting tabs shortened by ~1mm to fit the DCD805/DCD800 (and possibly other newer model drills/drivers). Should still fit older designs. Magnets mount via…
I added support for 6x3mm & 6x2mm Magnets. If you change the parameter in the original fusion file, the shape changes. I used the Push/Drag tool to change the hole for the magnets, to keep the shape of the model. Please leave a like ❤, if…
Remix of ( https://www.thingiverse.com/thing:3337602 ) Modified to accept a 10x3mm magnet since I had more of those than the 8mm ones. Thanks to HEIados for including a very nicely done Fusion 360 file to work with! To get the 10mm magnet…
- 8x3mm magnets to be glued in - 15% infill used in example - Big Note on this print: The example pictured used a layer modifier to add ironing from 3.5-4.5mm. It's not necessary, but I did not test without it on. If you have never done…
Bambu AMS Disconnect Tool with 5x3mm magnet for dual color print Remix of both versions (body from remix, letters from original) for dual color print and with an inset for a 5x3mm magnet. Thanks to @Jody and @HaraldGeisler for preparatory…
I liked the original benchy stand as it was a great way to show off how my different filaments printed and looked like, but it requires you to glue the pieces together. I didn't like the idea of gluing 3d printed pieces and, once glued,…
Воронка для маслозаливной горловины автомобиля Тойота, двигателя 4GR-fse, резьба М37х3мм Funnel for oil filler neck of Toyota car, 4GR-fse engine, thread M37x3mm
Original: https://www.printables.com/model/217840-axe-magnet I liked the original, just wanted it smaller, so I scaled it down and changed the magnet size to 8x3mm (wxh) Smallest version of the original that could support 8x3mm magnets I…
This is a remix of the Bambu Poop Chute by Fantasy3DPrintsShop , modified to suit my needs This uses 10x3mm magnets to attach to the metal plate on the back of the BambuLabs X1C, P1P and P1S. The support under the end where the magnets go…
Remove harmful fumes and VOC from the air to keep you, your family and your pets safe. This mod uses proven HEPA and activated carbon filters with powerful 5015 radial fans to achieve a 5.5x improved filtration over the axial version!…
Tweaked the PC4-M6 remix of this fantastic design to add 6x3mm magnets.
This is a remix of CORE One Purge/Trash Bin by @nicohirsch for use with 6x3mm round magnets. There are two versions available: Holes for magnets are 3.0mm deep Holes for magnets are 3.2mm deep They exist because the first layer squish…
The original model was the right width and depth I needed since my Bambu doesn't have that much room behind it from the wall. This remix model gives it a bit more height and uses pressed in magnets. no glue on the magnets. just some elbow…
I love the original fish magnet from kennyd1gital but I don't have the exact magnet size, so I made this remix for 8x3mm magnets. You can stick a maximum of 3 magnets in, but in my opinion 2 are enough :) Please also give a like to…
“So, my sadness makes perfect sense…and I do have vague memories of people refusing to breed with me.” - 8x3mm magnets to be glued in - 15% infill used in example -example printed on an MK4 using prusament filaments (PLA) If you’d like to…
A remix of Cmarlow bit holder adapted to 6x3mm magnets which were esier to get for me. Also a few changes compared to original design to improve on design: Reduced depth of holes in which bits go, magnets are strong enough to hold them in…
CORE One Nozzle replacement tool remixed with space for two 8x3mm round magnets so it can be stuck to the side of the printer. Versions included for for Prusa and E3D, Sock and No Sock. For detailed information about the Prusa vs E3D…
- 8x3mm magnets to be glued in - 15% infill used in example -example printed on an MK4 using prusament filaments (PLA) If you’d like to shoot some spare change or a dollar my way, you can donate here (paypal). (check out my profile for…
- 8x3mm magnets to be glued in - 15% infill used in example -example printed on an MK4 using prusament filaments (PLA) If you’d like to shoot some spare change or a dollar my way, you can donate here (paypal). (check out my profile for…
“Now get out from there, you're ruining the painting!” “You're ruining my joke.” 8x3 magnets to be glued in. Examples printed with 15% infill. If you’d like to shoot some spare change or a dollar my way, you can donate here (paypal).…
The Part that goes behind the printer is around 40mm wide and over all its only 70mm wide. The holes are also widen for 8mm magnets. You can find the original here:…
- 8x3mm magnets to be glued in - 15% infill used in example - Big Note on this print: I used a layer modifier to add ironing from 3.5-4.5mm. This allowed for better quality of the outline, to avoid gaps etc., without ironing every top…
Gear Shifter Fidget (6x3mm magnets) | REMIX (note: Modified to fit eight 6x3mm magnets instead of the original 5x3mm. And parts have to be glued together in the end.)
“We’ll get cars and like, we’ll get jobs, and we’ll have to like, mow lawns and scrub the grill, but we’re never gonna score ever! It’s gonna suck!” - 8x3mm magnets to be glued in - 15% infill used in example -example printed on an MK4…
These models are modular in design and made to connect to each other on a surface like a refrigerator.
“Cream of the crop!” - 8x3mm magnet to be glued in - 20% infill used in example -example printed on a mini+ using prusament filament (PLA) If you’d like to shoot some spare change or a dollar my way, you can donate here (paypal). (check…
“Beavis, I have seen the top of the mountain, and it is good.” - 8x3mm magnets to be glued in - 15% infill used in example -example printed on an MK4 using prusament filaments (PLA) If you’d like to shoot some spare change or a dollar my…
- 8x3mm magnet to be glued in - 15% infill used in example -example printed on an MK4 using prusament filaments (PLA) If you’d like to shoot some spare change or a dollar my way, you can donate here (paypal). (check out my profile for…
Found @Edward's model for 10x3mm magnets, but the needed to redesign for spouse-factor. STLs provided for a few cable-bundle sizes. In theory, no support is needed – the magnet hole depths have a 0.3mm tolerance to allow for…
“This is ham, soaked in rum.” - 8x3mm magnet to be glued in - 20% infill used in example -example printed on a mini+ using prusament filament (PLA) If you’d like to shoot some spare change or a dollar my way, you can donate here (paypal).…
Corner plugs for the Prusa Core One using 3 6x3mm magnets. Reccomended to print in PETG or other temperature resistant materials.
“It's okay to lose to opponent. It's never okay to lose to fear.” - 8x3mm magnet to be glued in - 20% infill used in example -example printed on a mini+ using prusament filament (PLA) If you’d like to shoot some spare change or a dollar…
The park is being audited today. Pops tried to pay the taxes with lollipops This is, by far, my favorite magnet design yet. Don't tell the other magnets…or you're fired. MORE REGULAR SHOW MAGNET DESIGNS COMING SOON! 8x3mm magnets to be…
- 8x3mm magnets to be glued in - 15% infill used in example - Big Note on this print: I used a layer modifier to add ironing from 3.5-4.5mm. This allowed for better quality of the outline, to avoid gaps etc., without ironing every top…
- 8x3mm magnets to be glued in - 15% infill used in example -example printed on an MK4 using prusament filaments (PLA) If you’d like to shoot some spare change or a dollar my way, you can donate here (paypal). (check out my profile for…
“Me, I don't like parties.” - 8x3mm magnets to be glued in - 15% infill used in example -example printed on an MK4 using prusament filaments (PLA) If you’d like to shoot some spare change or a dollar my way, you can donate here (paypal).…
- 8x3mm magnets to be glued in - 15% infill used in example -example printed on an MK4 using prusament filaments (PLA) If you’d like to shoot some spare change or a dollar my way, you can donate here (paypal). (check out my profile for…
1 version - with magnets 6x3 2 version - with screws, but without a hole for the switch 3 version - without magnets By increasing the thickness of the shell, it was possible to place external antennas and leave room for other modules in…
Always guard your pepperonis. 8x3mm magnet to be glued in…you know who else glues stuff in? MORE REGULAR SHOW MAGNETS COMING SOON (4 total!) 8/2023 - Redesigned the entire model to be more muscle-y, bro. New design allows for easier…
“Here we go!” - 8x3mm magnets to be glued in - 15% infill used in example -example printed on an MK4 using prusament filaments (PLA) If you’d like to shoot some spare change or a dollar my way, you can donate here (paypal). Quick Update:…
As the summary says, this is a remix of NotSure's design but uses 3x3mm magnets instead of the original 6x3mm magnets. It uses 32 magnets per piece instead of 8, and is arranged 4x8 magnets instead of 2x4 magnets as with the original.
- 8x3mm magnets to be glued in - 15% infill used in example -example printed on an MK4 using prusament filaments (PLA) (prusament orange looked so good!) If you’d like to shoot some spare change or a dollar my way, you can donate here…
- 8x3mm magnets to be glued in - 15% infill used in example -example printed on an MK4 using prusament filaments (PLA) If you’d like to shoot some spare change or a dollar my way, you can donate here (paypal). (check out my profile for…
- 8x3mm magnets to be glued in - 15% infill used in example - Big Note on this print: I used a layer modifier to add ironing from 3.5-4.5mm. This allowed for better quality of the outline, to avoid gaps etc., without ironing every top…
Needed a version with PC4-M6 and both M6 and M10 with 6x3mm magnets instead of 5x5mm.
- 8x3mm magnets to be glued in - 15% infill used in example -example printed on an MK4 using prusament filaments (PLA) If you’d like to shoot some spare change or a dollar my way, you can donate here (paypal). (check out my profile for…
“What can I say? I'm a Vagittarius. Oh!” - 8x3mm magnets to be glued in - 15% infill used in example -example printed on an MK4 using prusament filaments (PLA) If you’d like to shoot some spare change or a dollar my way, you can donate…
Remixed from Bambulab P1S Poop Chute to support for 6x3mm magnets
The Original Prusa Enclosure has many extra holes and zip tie hangers for customization as needed. These are great, but the enclosure with all the holes wont build heat well. To close the holes, I wanted something like the plastic push…
You'd better get yourself a garlic T-shirt, buddy, or it's your funeral . 8x3mm magnet to be glued in. Example print used 15% infill. 8/2023 - Redesigned this model, as it needed some fixing. Turned out fantastic with a layer color…
“Personally, I liked the university. They gave us money and facilities, we didn't have to produce anything! You've never been out of college! You don't know what it's like out there! I've WORKED in the private sector. They expect…
Hi there, this is my custom Toniebox tag for DIY Tonies. It works with the SLIX tags and a 20mm / 3mm magnet. After inserting the NFC tag and magnet, you have to glue the two pieces together. You can optionally glue an custom tonie figure…
“I like Lena Dunham. It's nice to see someone with my exact body type succeed.” - 8x3mm magnets to be glued in - 15% infill used in example -example printed on an MK4 using prusament filaments (PLA) (BIG THANK YOU to ChellaBelleM3d for…
I made in ABS with a original Prusa MINI
Your nickname was never Ace. Maybe Ace Hole. Face up print with layer color changes: Example used 15% infill 8x3mm magnet to be glued in (New) Face down multi-material print: Same infill File is tagged ‘multi’ in the filename Paint bucket…
- 8x3mm magnets to be glued in - 15% infill used in example -example printed on an MK4 using prusament filaments (PLA) If you’d like to shoot some spare change or a dollar my way, you can donate here (paypal). (check out my profile for…
Honeycomb Storage Wall (HSW) insert magnets based in the original inserts of the model of RostaP. Combine with any HSW, and all existing accessories to bring a bit more of order to your kitchen (if put in the door or side), or to your…
To the winch, wench! 8x3mm magnet to be glued in. Example print used 15% infill, but…we don't care whether or not we care. If you’d like to shoot some spare change or a dollar my way, you can donate here (paypal). (check out my profile…
A purge wiper/bin designed to hold six 6x3mm magnets for Prusa CORE ONE
“Right. That's bad. Okay. All right. Important safety tip. Thanks, Egon.” - 8x3mm magnets to be glued in - 15% infill used in example -example printed on an MK4 using prusament filaments (PLA) If you’d like to shoot some spare change or a…
- 8x3mm magnets to be glued in - 15% infill used in example - Big Note on this print: I used a layer modifier to add ironing from 3.5-4.5mm. This allowed for better quality of the outline, to avoid gaps etc., without ironing every top…
HANDLE WITH MAGNETS (8x3mm) - Cantilever tool/sewing box | REMIX note: Just print the “female version" twice and insert the bars with the magnet-holes instead of the original ones . For the yellow 215x215 box in the pictures, 3 magnets on…
Purge tray for the Prusa XL with three 10x3mm magnets embedded in the part. Sticks to the underside of the steel sheet. Pause the print at Z=3.2mm to add the magnets. Recommended to print using a material with high glass temperature, such…
Remix of Hydra Logo Magnet. Split into two parts to make printing with the MMU easier. Also resized the magnet holes to be 8x3mm
I made these because I needed them. I use strong Neodymium 10x3mm magnets in many of my projects and I hope this model helps you. Please share pictures of what your wall looks like! Make sure you add super glue to the holes before putting…
Remix of the original i found here. Print In Place Box With Magnetic Closure
“Try to imagine all life as you know it stopping instantaneously and every molecule in your body exploding at the speed of light.” - 8x3mm magnets to be glued in - 15% infill used in example -example printed on an MK4 using prusament…
These models were created for me by Fiverr seller Gaurav Dubey as part of a video project. They allow you to add a 15x3mm magnet to your multiboard, in 3 different ways: Regular Snap Double-Sided Snap Large Thread Choose whichever you…
This model is a remix of the famous filament cutter 45°. I found that a 60° angle cut is more likely to fit smoothly in the mmu2s tubings so ive designed this model out of Fusion360. It have been designed to house 8x3mm Neodym magnets…
“You touch those and your G.I. Joes are gonna be M.I.A., my friend! and then who's gonna call Little Momma Joe, to tell her that her boy ain't coming home, cause SOMEBODY was asleep on guard duty!” The Master Shake magnet—just add your…
“Mother, you treat her right!” - 8x3mm magnet to be glued in - 20% infill used in example -example printed on a mini+ using prusament filament (PLA) If you’d like to shoot some spare change or a dollar my way, you can donate here…
It'll save your life someday! It's okay to yell this and then begin hambonin' when you feel threatened. (check out my profile for more Regular Show magnets) 8/2023 - Updated the entire design. I'd been wanting to redesign this one for a…
“Well, they tell ya, 'Never hit a man with a closed fist.' But it is, on occasion, hilarious.” - 8x3mm magnets to be glued in - 15% infill used in example -example printed on an MK4 using prusament filaments (PLA) If you’d like to shoot…
I just edited the very good mod by John Doe to accomodate bigger 6x3 magnets (superglue suggested)
Shirt button/classic button I made for my wife. She actually used it for a fox she was making out of yarn, and needed some larger button holes for the eyes. So here is my first design on thingiverse. The button has 4 holes each at 3mm.…
Govee Hygrometer (H5075) Magnetic Mount (12x3mm Magnets) For mounting Bluetooth connected Hygrometer in printer, drybox, etc. H5075 keeps history so you can keep track of dry box humidity and temperatures over time. No support Press the…
Changed length and magnet pockets size. 6x3mm round magnets are required for this version. Three for each tray.
This is a simple system of pieces that use 15mm x 3mm magnets to snap together for mocking up and prototype routing exhaust or other pipe routing. This base design is set up to represent 2" outside diameter pipe, approximately 50.8mm. In…
Remix to use common magnet size from Voron printers. How many you use is up to you. Unlikely to need to fill every hole.
A remix of mgx bit holder adapted to 6x3mm metric magnets. Also made bit holes a bit more shallow so its easier to pull bits out. Requires 12x 6x3mm (2 for each hole) cylinder magnets. Magnet holes are tight enough that no glue is needed…
Poop chute for Bambu Lab P1PP1SX1
A barely-a-remix of thrutheframe's excellent round hygrometer mount for dry boxes. The only change here is that the magnet holes have been widened out to accommodate 8mm by 3mm round magnets instead of the original 6mm ones. Works…
Like keejo's magnets just with bigger magnets, they are even compatible to keejo's . Dimensions 35x36x4,4mm Non printed parts One magnet with 8x3mm for each Lizard. Print instructions I printet it our of PLA with the 0,2mm quality setting…
Remixed the model to fit 6x3mm magnets. It might be a tight fit, and it really depends on your magnets. You might have to make the hole a little larger.
This is a play on the EDC Screwdrivers that have a ball bearing at the end. Build requires a 6x3mm Magnet, Ball Bearing and M3*16 screw. Enjoy!
“Don't you know what's goin' on out there? This is no Sunday School picnic!” 8x3mm magnets to be glued in. Example print used 15% infill…because there was no more room in hell! If you’d like to shoot some spare change or a dollar my way,…
Printed in PETG .2mm layer, supports, 25% infill. No necessary glue for magnet.
21/07/2023; i reuploaded the lid, as some users reported a corrupted file This is a remix of @cushmail_454332 design for a Hepa filter. I did not have 5x5mm magnets on hand, only 6x3mm. It needs a total of 20 magnets. It still has the…
Meatwad get the honies, G'! Uses an 8x3mm magnet Don't forget to pick up the Ignignokt & Err magnets, here: https://www.printables.com/model/219088-ignignokt-magnet-can-you-see-this-denver-8x3-magne Print: -Supports: Boy, you don't need…
“Shake, get rid of the damn sandwich! If you keep it here, you're gonna eat it, then you're gonna die.” The Frylock magnet—just add your own 8x3mm magnets. If you’d like to shoot some spare change or a dollar my way, you can donate here…
“I am the terror that flaps in the night! I am the wrong number that wakes you at 3am...” - 8x3mm magnets to be glued in - 15% infill used in example -example printed on an MK4 using prusament filaments (PLA) If you’d like to shoot some…
UPDATE I've updated the design to make the arm a little stronger. Every arm I tested (in PLA) broke at the hinge point. Might need to be printed with ASA or CF. My filament lever broke. I had some 8x3mm magnets laying around, but they are…
“Remember I told you I didn't like getting egg on my face? Well, right now, I'm wearing a whole omelet.” - 8x3mm magnet to be glued in - 20% infill used in example -example printed on a mini+ using prusament filament (PLA) If you’d like…
Thought id share this drill bit
“[reading from the manual] How to Turn Off Your Suck-O-Matic.” "In case Suck-O-Matic sucks instructions, see page 101…"PREPARE TO DIE"?!” - 8x3mm magnets to be glued in - 15% infill used in example -example printed on an MK4 using…
