P
PrintablesTimElectric
Loxone-Nano-2-Relay-with-Wago
Loxone Nano 2 Relay Tree mount for DIN Rails with Holders for Wago 221
- Pobrania
- 622
- Polubienia
- 34
- Ocena
- 5
Wyniki wyszukiwania: xone
Liczymy pasujące modele…
P
Printablesseasick
Loxone NFC Code Touch compatible cover
This cover was inspired by Davejje 's model . The measurements for the default values were measured and ultimately copied from that model. Those values are compatible with the “Loxone NFC Code Touch”, 2nd generation. The OpenSCAD script…
- Pobrania
- 445
- Polubienia
- 26
- Ocena
- 5
P
PrintablesTimElectric
Loxone Nano 2 Relay Tree Rail Mount
Loxone Nano 2 Relay Tree mount for DIN Rails
- Pobrania
- 419
- Polubienia
- 8
- Ocena
- 5
P
PrintablesTimElectric
Loxone Nano DI Tree Rail Mount
Loxone Nano Di Tree mount for DIN Rails
- Pobrania
- 366
- Polubienia
- 13
- Ocena
- 5
P
PrintablesTimElectric
Loxone Nano Din Rail Mount
Din Rail bracket for mounting Loxone IO Air or Loxone Air Dimmers on a DIN Rail
- Pobrania
- 342
- Polubienia
- 18
- Ocena
- 0
P
PrintablesPrinter McGee
Loxone Valve Actuator Cable Tie
Version(s) V1.0 - 15Nov24 - Initial Design V2.0 - 06Jan24 - Added bottom bracket ---- Description After a few years, I noticed some heads were popping off the holders, so this little top/bottom bracket is to be used with x2 cable ties to…
- Pobrania
- 328
- Polubienia
- 16
- Ocena
- 4,5
P
PrintablesVVlasy
Loxone Touch Mountplate
This is a like for like replacement mounting bracket for Loxone Touch Air, Loxone Touch Tree and Loxone Touch for Nano. No special print settings are needed, a simple print Print instructions Unassociated tags: loxone touch, nano io…
- Pobrania
- 280
- Polubienia
- 18
- Ocena
- 5
P
Printablesfbe4974df721
NARCAN (naloxone) Nasal Spray holder
Easily prints in PETG or PLA. Using 0.3mm layer height as there's no need for detail. Version 1.2 is called “thin brow”, as it has less overhang at the very top. This makes the holding a little bit looser.
- Pobrania
- 271
- Polubienia
- 24
- Ocena
- 3
P
PrintablesTimElectric
LOXONE Touch Tree to GIRA Adapter
This is a simple adapter for integrating the LOXONE Touch Tree switch into the GIRA Standard 55 switch range. Without the adapter the LOXONE Touch Tree switch is not in one level with the frame element (see pictures). The adapter is…
- Pobrania
- 243
- Polubienia
- 11
- Ocena
- 5
P
PrintablesRené
Loxone Double Frame Angle Adapter (30°) for Smart Doorbell
This practical 3D-printed angle adapter lets you mount a Loxone double frame, including the Smart Doorbell, at a 30° tilt. By adding this slight angle, you can optimize the camera’s field of view or the doorbell’s sensors, ensuring better…
- Pobrania
- 194
- Polubienia
- 8
- Ocena
- 0
P
PrintablesDavid D
Loxone mountplate for Jung LS 990
Mountplate so you can fit the Loxone touch inside a Jung LS 990 system. Needs the Jung 55mm Zwischenrahmen in addition. See https://www.jung-group.com/de-DE/Zwischenrahmen-55x55-Serie-LS-alpinweiss/LS-961-Z5-WW Thanks to…
- Pobrania
- 172
- Polubienia
- 9
- Ocena
- 0
P
PrintablesVVlasy
Loxone Touch Tango Adapter
An adapter to fit loxone products into Tango wall plate. Two parts, the mounting bracket a the cover plate itself Assembly is shown in the last four pictures. Printed bracket has to go above the tango bracket. No special print settings…
- Pobrania
- 170
- Polubienia
- 18
- Ocena
- 5
P
PrintablesTimElectric
Loxone MicroSD Extender DIN
Loxone MicroSD Extender in Loxone Style. Remix from Walkingrobot…
- Pobrania
- 146
- Polubienia
- 16
- Ocena
- 0
P
PrintablesFoxHouse
Loxone Präsenzmelder Air Aufputz Adapter
Adapter um einen Präsenzmelder Air von Loxone über ein Aufputz-Kabel mit Strom zu versorgen.
- Pobrania
- 139
- Polubienia
- 11
- Ocena
- 5
P
PrintablesDries Housen
Loxone Touch Surface box (simple)
A simple box for the loxone Touch switch
- Pobrania
- 126
- Polubienia
- 3
- Ocena
- 0
P
PrintablesVafi
Mount for Loxone double mounting bracket
For ASA filament I recommending to use mouse ears. Edit 17.12.: Added left and right sided models
- Pobrania
- 119
- Polubienia
- 10
- Ocena
- 0
P
PrintablesSuperMatt
prop nasal spray for naloxone use education
Put together this prop for use in education of people for proper naloxone use Category: Other
- Pobrania
- 118
- Polubienia
- 11
- Ocena
- 0
P
PrintablesDanielR
Loxone Remote Air mini holder
Just holder for Remote air to glue it on place, where you always need to find your Remote Air.
- Pobrania
- 117
- Polubienia
- 9
- Ocena
- 4
P
PrintablesSilenTree 12th
XboxOne Controller stand Borderlands
A little remix with the Borderlands logo Print Settings Printer Brand: Prusa Printer: i3 MK3 Rafts: No Supports: No Resolution: 0.2mm Infill: 5% Filament: Plasty Mladeč PLA White and Black Category: Video Games
- Pobrania
- 116
- Polubienia
- 27
- Ocena
- 0
P
PrintablesDoubleYou7
Loxone Intercom Weather Case Pro
Loxone Intercom Weather Case
- Pobrania
- 115
- Polubienia
- 7
- Ocena
- 5
P
PrintablesZach
Electrical box for double and triple Loxone Mounting Bracket
Double and triple Loxone Mounting Brackets (https://shop.loxone.com/enen/mounting-bracket-double-silver.html, https://shop.loxone.com/enen/triple-mounting-bracket-silver.html) have non-standard box spacing of 98 mm. Installing three…
- Pobrania
- 113
- Polubienia
- 22
- Ocena
- 0
P
Printables3DFlow
Allen&Heath Xone:96 Angled Stand
I had an omnitronic trm mixer with an angled base from omniwood and since upgrading to the xone, something was missing. Here we are! Super simple design, printed with 30% infill. Add rubber feet or tape for better rigidity on the base. A…
- Pobrania
- 112
- Polubienia
- 7
- Ocena
- 5
P
PrintablesRiverRaid
Loxone Remote Air Wallmount
Wallmount for the Loxone Remote Air Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: Doesn't Matter Supports: No Resolution: 0.2 Infill: 20% Filament: Prusament PETG Galaxy Black Category: Organization
- Pobrania
- 110
- Polubienia
- 5
- Ocena
- 0
P
PrintablesRobertHirschbeck
Adapter Plate 30° for Loxone Intercom
I have created an adapter plate for a Loxone Intercom and Touch Code with an angle of 30 degrees. The holes for mounting the plate at the wall are horizontally. You will need 6 threaded inserts with a M3 thread (Ruthex). These holes are…
- Pobrania
- 108
- Polubienia
- 3
- Ocena
- 0
P
Printablesmih
Loxone Air Contact Waterproof Box
This is box for outdoor mount of Loxone Contact Air. It consits of three parts - box, cap and gasket. Box and cap is printed from PETG, gasket from Flex.
- Pobrania
- 103
- Polubienia
- 9
- Ocena
- 0
P
Printables4systems
Loxone remote sun visor holder
Loxone Remote Air for storage on the car sun visor. Fit to all standard car sun visor. (~20mm thick) It is recommended to use double-sided adhesive on one inner side so that it does not shake off from the awning when it is folded down.…
- Pobrania
- 101
- Polubienia
- 11
- Ocena
- 0
P
Printablesbclucki
Loxone Zählerinterface IR Air Adapter eBZ DD3
Adapter zur Anbringung des Loxone Zählerinterface IR Air an eZB Zahler DD3
- Pobrania
- 85
- Polubienia
- 3
- Ocena
- 0
P
Printableslord-carlos
Eventide H9 stand for DJ mixer setup: Xone 96
A small stand for the Eventide H9 effect box so it fits behind the DJ mixer. It adds an 20 degree angle. Best if you add small rubber feet. I uploaded the step files, but you can have my onshape link directly as well:…
- Pobrania
- 84
- Polubienia
- 2
- Ocena
- 0
P
PrintablesDries Housen
Loxone presence sensor
During the installation of the presence sensors I noticed that there where some hickups. This solved the mounting. The concrete vaults had soms damages from drilling, this created a smooth surface.
- Pobrania
- 75
- Polubienia
- 8
- Ocena
- 0
P
PrintablesTimElectric
Loxone SD card adapter for DIN Rail
Loxone SD card adapter for DIN Rail
- Pobrania
- 72
- Polubienia
- 4
- Ocena
- 0
P
PrintablesBlaine Francis
Naloxone/Narcan Holder with Molle
Needed a Narcan holder for my vest so I designed this. Works very well at holding the Narcan in place. Works with PLA since it is a place and forget thing but would recommend PETG or equivalent strength.
- Pobrania
- 71
- Polubienia
- 5
- Ocena
- 0
P
Printablesmaddindj42
Distance Piece for Loxone on Gira Standard 55
Distance Piece for height adjustement for Gira Standard 55 frames and Loxone componentents. Tested wit Loxone Nano IO Air and Touch for Nano. Also Tested with Loxone Touch Air For mounting is also the mountingframe Type1 needed:…
- Pobrania
- 69
- Polubienia
- 2
- Ocena
- 5
P
Printablese.k
Loxone Präsenzmelder Halterung
Befestigung der Halterung mit max. d4,5mm (Pan Head) Schrauben. Fixierung von Loxone Drehverschluss mit Dosenschrauben d3,2x15mm.
- Pobrania
- 68
- Polubienia
- 5
- Ocena
- 0
P
PrintablesBoutsman
Loxone touch tree DIN adapter
This is a DIN rail adapter for the Loxone touch tree @ Erasmushogeschool Brussel
- Pobrania
- 68
- Polubienia
- 4
- Ocena
- 0
P
PrintablesSANAIR
LOXONE Nano Dimmer Air Model
3D Model for the Nano Dimmer Air. Usefull incase someone wants to make enclosures or mounts for this one. Could not get a model from the supplier, so had to design one. @Loxone: pls inform me incase of any IP infringement. I will remove…
- Pobrania
- 64
- Polubienia
- 3
- Ocena
- 0
P
PrintablesTimElectric
DIN-Mount for MicroSD - SlotExtender (Loxone)
A friend bought an extender ( https://www.aliexpress.com/item/kebidu-Hot-sale-25CM-48CM-62CM-TF-to-micro-SD-card-Flex-Extension-cable-Extender-Adapter/32832944156.html?spm=a2g0s.9042311.0.0.5b094c4dG31W1H ) for the microSD-slot on his…
- Pobrania
- 62
- Polubienia
- 12
- Ocena
- 0
P
Printablese.k
Loxone Präsenzmelder Aufputzmontage
Befestigung der Halterung mit d4,5mm (Pan Head ) Schrauben. Fixierung von Loxone Drehverschluss mit Dosenschrauben d3,2x15mm. Kabeleinführung bis d=8mm
- Pobrania
- 58
- Polubienia
- 3
- Ocena
- 0
P
PrintablesPetr Nohejl
Loxone NFC Code Touch Cover
Weather-proof cover for Loxone NFC Code Touch keypad. This cover is designed to protect the device from rain and snow. It has a simple, minimalistic, and functional aesthetic. It is designed to slide directly onto the keypad. No screwing…
- Pobrania
- 53
- Polubienia
- 2
- Ocena
- 0
P
PrintablesAndre S.
Loxone motion detector holder
I redesigned a holder for the Loxone motion detectors because the holders were not available to purchase separately.
- Pobrania
- 52
- Polubienia
- 2
- Ocena
- 0
P
Printablesricklewik
CROSSFADER LOCK FOR ALLEN & HEATH XONE:23 MIXER
Crossfader lock for the ALLEN & HEATH XONE:23 to prevent accidental moves and ensure stable control during live performance, likely fitting other XONE mixers as well. Printed with MK 3.5S
- Pobrania
- 47
- Polubienia
- 3
- Ocena
- 0
P
PrintablesDanielR
Loxone Remote Air
Holder for new Remote Air with holes for mounting using screws
- Pobrania
- 46
- Polubienia
- 3
- Ocena
- 0
P
PrintablesJared West
RetraxONE XR Drain Plug
Retrax wants a ton for this part and it's not all that solid. Replacement drain plug that fits the Retrax RetraxONE XR but might fit others as well. This moves the plug to a 90-degree angle to move the tube out of the way of the bed.…
- Pobrania
- 46
- Polubienia
- 4
- Ocena
- 0
P
Printablesschattenparker
Loxone Aufbauring für Präsenzmelder
Ich habe zwei Montage‑Ringe entworfen, um den Präsenzmelder als Aufbauversion zu installieren: • einen Ring für 15‑mm‑Kabelkanäle • einen Ring für eine einfache Kabeleinführung Die Schraublöcher sind vollständig durchgehend und können…
- Pobrania
- 43
- Polubienia
- 3
- Ocena
- 0
P
PrintablesZach
Loxone ceiling speaker cover mount
Loxone sells its own 7" ceiling speaker ( link ) which you can and should install into the special back box ( link ). The problem is that if you plan to make only preparations for the speakers and not actually buy them, you end up with a…
- Pobrania
- 41
- Polubienia
- 8
- Ocena
- 0
P
Printablessteve
Weather Cover for Loxone Double Mounting Frame Intercom / NFC Code Touch
I needed a nice frame for my Loxone Intercom and NFC Touch, because the hole behind was a little bit to big. By the way, now with the cover, it is more weather protected. The Cover is designed in FreeCAD by myselfe. The Frame is from…
- Pobrania
- 39
- Polubienia
- 0
- Ocena
- 0
P
PrintablesDaStaudi
Loxone Touch Mountplate – Extended Snap Tabs
This remix features snap tabs extended by 2 mm, designed to securely hold the Loxone Touch in place when used with a 2 mm spacer frame inside a B&J Balance SI cover frame.
- Pobrania
- 38
- Polubienia
- 2
- Ocena
- 5
P
Printablesmaddindj42
Busch-Jaeger Future linear Loxone Adapter
Adapter for gapfilling for Busch-Jaeger Future linear frames and Loxone componentents. Tested wit Loxone Nano IO Air and Touch for Nano. Also Tested with Loxone Touch Air For mounting is also the mountingframe Type1 needed:…
- Pobrania
- 38
- Polubienia
- 2
- Ocena
- 0
P
PrintablesRadoslav Irha
Loxone Touch x ABB Zoni
Kit for mounting Loxone Touch into ABB Zoni frame. Fits well into multi frame.
- Pobrania
- 37
- Polubienia
- 2
- Ocena
- 0
P
PrintablesJirka Novak
Loxone Touch Air to ABB Neo adapter and cover
Adapter fits into ABB Neo frame and keeps Loxone Touch Air button on place. Cover plate closes Neo frame. Tested with single and multi Neo frames. FreeCAD source file is attached. Print instructions Adapter is printed from PETG, 0.1 mm…
- Pobrania
- 34
- Polubienia
- 1
- Ocena
- 0
P
PrintablesUSSJoin
Naloxone Hard Carrying Case
I needed a hard case to carry naloxone (Narcan) in a way where it wouldn't get roughed up. There are some cases elsewhere to carry naloxone in its card (so, still bearing its tamper-evident foil), but they're pretty large--like carrying…
- Pobrania
- 32
- Polubienia
- 9
- Ocena
- 0
P
PrintablesPrinter McGee
Loxone Touch Tree Spacer
Used when using a 100x100 backbox for me
- Pobrania
- 32
- Polubienia
- 6
- Ocena
- 0
P
PrintablesHareware
Loxone RGBW Dimmer Air slim case
Just take apart your Loxone RGBW Dimmer Air and print this box if you want to put in slim space. Print with 0.2 layer and PLA or PETG V0.
- Pobrania
- 32
- Polubienia
- 2
- Ocena
- 0
P
PrintablesHareware
Loxone RGBW Dimmer Air slim mountable case
Just take apart your Loxone RGBW Dimmer Air and print this box if you want to put in slim space and mount it with some srews. Print with 0.2 layer and PLA or PETG V0.
- Pobrania
- 32
- Polubienia
- 2
- Ocena
- 0
P
PrintablesBoutsman
Loxone presence tree DIN adapter
This is a DIN rail adapter for the Loxone presence tree @ Erasmushogeschool Brussel.
- Pobrania
- 29
- Polubienia
- 1
- Ocena
- 0
P
PrintablesBartyMcFisher
LOXONE Presence Sensor Air/Tree Case
Give your LOXONE Presence Sensor Air/Tree a custom touch/colored case. Drill holes are deliberately offset by 1.25 mm to adjust for lateral shift and center the sensor in the case. Wide cutouts for your tree cable. Concentric top surface…
- Pobrania
- 28
- Polubienia
- 4
- Ocena
- 0
P
PrintablesMichael
Loxone powersupply lock
Replacement part for the locking mechanism on a loxone/meanwell power supply, since i broke mine and it wasn't latching onto the DIN rail anymore.
- Pobrania
- 28
- Polubienia
- 3
- Ocena
- 0
P
PrintablesOndřej Stříteský
Loxone extension lock
Simple DIN lock for Loxone Miniservers and Extensions
- Pobrania
- 28
- Polubienia
- 4
- Ocena
- 5
P
Printablesmaddindj42
Mountingframe Type1 for Loxone Touch
Mountingframe for Loxone. Tested with Loxone Nano IO Air and Touch for Nano. Also Tested with Loxone Touch Air Compatibel with folowing Switch frontplates: Busch-Jaeger Future LinearBusch-Jaeger Future Linear (Aditional Adapter:…
- Pobrania
- 26
- Polubienia
- 2
- Ocena
- 0
P
Printablesaamott
MeltXone | High Flow Hotend Upgrade
MeltXone | High Flow Hotend Upgrade Or should we call it the Hyper Spacer? Anyway, you can see it in use in the video below. This is a nozzle spacer, like those used to add a CHT nozzle to the volcano hotend, but with some internal…
- Pobrania
- 26
- Polubienia
- 14
- Ocena
- 0
P
PrintablesSimple Solutions 3D
Naloxone Logo AMS enabled
A coworker wanted this to attach on a bag. Very simple design but it's my first attempt at making a logo where the bottom layer is the colouring. Can be printed at 0.2mm layer height no problem, best to turn on “Avoid Crossing Walls” and…
- Pobrania
- 25
- Polubienia
- 10
- Ocena
- 0
P
PrintablesPetr Nohejl
Loxone Buttons & Sockets Pictograms
This is a set of intuitive Loxone icons and pictograms that clearly label your buttons and sockets to indicate their specific functions. I had to create these pictograms because our visitors were constantly confused about the…
- Pobrania
- 21
- Polubienia
- 2
- Ocena
- 4
P
Printablesvolt
Loxone touch air - tooltip
🇨🇿 Loxone Touch Air — Pouzdro s ikonami pro popis tlačítek Vylepšete svůj Loxone Touch Air pomocí elegantního 3D tisknutelného pouzdra, které umožňuje vkládat vlastní ikony pro všech 5 dotykových tlačítek. Už žádné hádání — jasné označení…
- Pobrania
- 19
- Polubienia
- 6
- Ocena
- 0
P
PrintablesFoxHouse
Loxone- / KNX-Bus Klemmdose
mit dieser Klemmdose ist es möglich 8 Buskabel miteinander zu Verbinden. Benötigt werden noch Wago Klemmen 243-308 MICRO PUSH WIRE Connector.
- Pobrania
- 16
- Polubienia
- 1
- Ocena
- 0
P
PrintablesAndrej
Loxone Presence sensor bracket raised
This model is still being worked on to, test and prove the use of the design. This model is remixed through @Vafi's bracket for the presence sensor. This way there's more room for screw heads to not touch the sensor itself. Also gives…
- Pobrania
- 13
- Polubienia
- 0
- Ocena
- 0
P
Printablessax
mount clip for bicycle mudguard/fender (sfm, sachs, saxonette)
replacement for a small but important part. printed sidewards with support in PETG.
- Pobrania
- 13
- Polubienia
- 2
- Ocena
- 0
P
PrintablesTimElectric
Loxone BP DI Tree
Support to hold my Loxone BP DI Tree module in a recessed blochet.
- Pobrania
- 12
- Polubienia
- 3
- Ocena
- 0
P
PrintablesAndrej
Loxone Touch Extension
This Loxone Touch Extension is made to house all needed cables and make surface-mount possible. Holes made to mount the original plate to the extension housing.
- Pobrania
- 11
- Polubienia
- 0
- Ocena
- 0
P
PrintablesDieter W.
Loxone Table Lamp Air Wireless Charging Extension
An extension for the Loxone Table Lamp Air to enable wireless charging. For each lamp, you need one wireless charging receiver, one of these extensions, and at least one wireless charging pad. The extension is designed to fit onto the…
- Pobrania
- 10
- Polubienia
- 2
- Ocena
- 0
P
PrintablesPetr
Krabička pro loxone dimmer air
Krabička pro loxone dimmer air, pro tisk použijte samozhášivý mateiál
- Pobrania
- 9
- Polubienia
- 0
- Ocena
- 0
P
PrintablesLadousek
Replacement Clip / Snap for Loxone NFC Code Touch
Description Replacement snap clips designed to repair broken locking tabs on the Loxone NFC Code Touch. A common failure point of this device is the small plastic snap clips, which can break during disassembly or installation. When this…
- Pobrania
- 8
- Polubienia
- 1
- Ocena
- 0
P
Printablesvasiliosviteri
Allen & Heat Xone: 23/23C - Crossfader Lock
I already test in my actually Xone: 23C because this mixer doesn't have the on/off function of the crossfader. It's works so great with my mixer so i want to share with you!
- Pobrania
- 8
- Polubienia
- 1
- Ocena
- 0
P
PrintablesLukas
Tisch Ständer für LOXONE Touch Pure Display
Tisch Ständer für LOXONE Touch Pure Display Versorgung mit USB-C Triggerboard 18x11mm 20V 5A
- Pobrania
- 7
- Polubienia
- 2
- Ocena
- 0
P
PrintablesMichal
Loxone Remote Mini Air exterior doorbell
Use the "Loxone Remote Mini Air" as an exterior doorbell. Easy installation, simple operation, and setup.
- Pobrania
- 6
- Polubienia
- 2
- Ocena
- 0
P
Printables4FingerEddy
Loxone Presence Sensor Air & Tree Surface-Mount Cable Adapter
This adapter is designed to fit the Loxone Presence Sensor Air and Presence Sensor Tree and provides a cable entry for surface-mounted wiring. Because apparently making a surface-mounted presence sensor accept surface-mounted wiring…
- Pobrania
- 6
- Polubienia
- 1
- Ocena
- 0
P
Printablesvivacello
Copaxone Medication Case
A case insert for the C-Sync Copaxone Case that holds all the syringes in place and adds on pill slots on the sides. The 2 boxes for holding extra things
- Pobrania
- 6
- Polubienia
- 4
- Ocena
- 0
P
PrintablesO.R.3
ABB switch frame for LOXONE use
Enables the combination of standard ABB switches with a LOXONE switch — an ideal solution for upgrading an existing installation.
- Pobrania
- 5
- Polubienia
- 1
- Ocena
- 0
P
Printables4FingerEddy
Loxone NFC Code Touch — 10 mm Surface-Mount Spacer Frame
A compact surface-mount spacer for the original mounting plate This frame adds 10 mm of wall clearance behind the original Loxone NFC Code Touch Tree mounting plate. It provides space for wiring and lets you bring a cable in from any of…
- Pobrania
- 5
- Polubienia
- 2
- Ocena
- 0
P
PrintablesG-TECH
Vertical Table Stand for Loxone Presence Sensor Air
A tabletop stand designed for the Loxone Presence Sensor Air 100420. It allows the sensor to be placed vertically on a desk, shelf, or cabinet. The sensor simply slides into the semicircular slot from above, without screws, adhesive, or…
- Pobrania
- 4
- Polubienia
- 0
- Ocena
- 0
P
Printables4FingerEddy
Loxone Wall Display 10 Surface-Mount Base
This surface-mount base is designed specifically for the Loxone Wall Display 10" (100891) and provides a mounting base for surface-mounted installations. The Wall Display is designed to live on a wall. Getting the required wiring there…
- Pobrania
- 4
- Polubienia
- 1
- Ocena
- 0
P
PrintablesBERTHOLD
Loxone Wireless Speaker Battery Mount Makita 18V
I used the Makita LXT 18V Battery Mount and added a mounting bracket for the Loxone Wirelessspeaker in combination with the Makita 18V batteries. You will also need the spare part (643852-2) to attach it for the battery mount. I wired…
- Pobrania
- 3
- Polubienia
- 1
- Ocena
- 0
P
Printables
ABB switch frame for LOXONE use
Enables the combination of standard ABB switches with a LOXONE switch — an ideal solution for upgrading an existing installation.
P
Printables
Naloxone/Narcan Holder with Molle
Needed a Narcan holder for my vest so I designed this. Works very well at holding the Narcan in place. Works with PLA since it is a place and forget thing but would recommend PETG or equivalent strength.
P
Printables
Replacement Clip / Snap for Loxone NFC Code Touch
Description Replacement snap clips designed to repair broken locking tabs on the Loxone NFC Code Touch. A common failure point of this device is the small plastic snap clips, which can break during disassembly or installation. When this…
P
Printables
Allen & Heat Xone: 23/23C - Crossfader Lock
I already test in my actually Xone: 23C because this mixer doesn't have the on/off function of the crossfader. It's works so great with my mixer so i want to share with you!
P
Printables
Loxone Touch Extension
This Loxone Touch Extension is made to house all needed cables and make surface-mount possible. Holes made to mount the original plate to the extension housing.
P
Printables
Loxone Zählerinterface IR Air Adapter eBZ DD3
Adapter zur Anbringung des Loxone Zählerinterface IR Air an eZB Zahler DD3
P
Printables
mount clip for bicycle mudguard/fender (sfm, sachs, saxonette)
replacement for a small but important part. printed sidewards with support in PETG.
P
Printables
Allen Heath - Xone K2 and K3 stands
Stands for K2 and K3 controllers in two parts so they can be printed on smaller printers. The stands are different because the k2 and k3 have a different arrangement of rubber on the bottom of the controller. Connect parts with 3 screws…
P
Printables
Modular Butterfly Knife by rkxone: Revised Handle Lock
A revision of the handle lock v3. I've added some thickness to the latter half of the lock, widening it from 3.1mm to about 4mm, and added a wedge. This will make the lock fit into the blade via friction and make locking it a bit more…
P
Printables
Allen & Heath Xone:96 Dust Cover / Protective Lid
Keep your legendary analog mixer safe from dust, accidental spills, and physical impacts when not in use! This custom-designed protective lid fits precisely over the faceplate of the Allen & Heath Xone:96 , safeguarding those precious…