1455 modeli
Fern can be seen wearing this in her hair througout the show. There are two versions: Curved - Requires supports. glue on a hairclip and your good to go. Flat - Easier to print. If you are using PLA, you can put it in hot water an and…
Wydruk około 4,83 €–5,91 € nettoWstępna wycena jednego wariantu
Multifuncional case This case design is inspired by Prusa style and motto: Everyone is a maker, only I am a printer PRUSA It fit self-rolled cigarettes, to fit regular size cigarettes you can just scale it to 114% in every direction. The…
Wydruk około 1,95 €–2,38 € nettoWstępna wycena jednego wariantu
Garmin Mount for the Canyon Aeroad (2023) Model. nedded Prints: 1x AeroadGarminMount 1x garmin-interface-spring 1x garmin-interface-lockring 1x assembly-tool (only for assembly) other needed Material: 2x M4x14 Screws (or similar length,…
Wydruk około 2,12 €–2,59 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a remake of the MattHub mount for the Bigscreen Beyond audio strap. The mount backplate is nearly identical to the one bundled with the hub, but my remake features 1.85mm holes instead of 2mm for a stronger fit with undersized…
Wydruk około 0,35 €–0,43 € nettoWstępna wycena jednego wariantu
A simple crayon container for children to keep their crayons safe! Hello! I'm a teacher, and I designed this crayon container because my students needed a way to organize their crayons. I wanted to create something fun so they would love…
Wydruk około 4,51 €–5,52 € nettoWstępna wycena jednego wariantu
I couldn't find a crayon or pencil extender for my kids' crayon scraps. The commercial ones were either too expensive or too difficult for kids to handle. So I designed one myself. Advantages : Easy and fast crayon change. Optimized for…
Wydruk około 0,16 €–0,20 € nettoWstępna wycena jednego wariantu
bottom part REMIXed for Canyon Exceed CF6
Wydruk około 0,79 €–0,96 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Keep the filter on and place this lens cap on to protect it. Suitable for TLR Bayonet 1, Aires reflex, Rolleicord, Rolleiflex and others. Filament: PETG Which one to print? From left to right: Lenscap for Rolleiflex with bay 1 filter on,…
Wydruk około 0,36 €–0,44 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Does require supports for front row of letters.
Wydruk około 3,17 €–3,87 € nettoWstępna wycena jednego wariantu
One of the infinite uses for your Prusament-Plumbus, is as an organizational unit. Print instructions Use disc magnets up to 9mm in diameter and 3mm height for the showed holes, make sure of the magnets polarity face before glue them.…
Wydruk około 0,91 €–1,12 € nettoWstępna wycena jednego wariantu
This is a custom box for the Particle Tachyon single board computer (SBC). This computer has the Raspberry Pi form factor, but does not use the exact same port, so a tailored case was in order. There are several variant of the model to…
Wydruk około 2,29 €–2,80 € nettoWstępna wycena jednego wariantu
Ya no podía destrabar la manija para llevar mi carry-on asi que la desarmé y me fijé qué tenía roto. Arreglé el botón e imprimí uno nuevo. Lo imprimí en PLA con soportes para que la cara visible del botón quede bien plana. WIP: Estoy…
Wydruk około 1,31 €–1,60 € nettoWstępna wycena jednego wariantu
Diese Schlucht kann verwendet werden um mit 3D-Stiften gezeichnete oder selbst gebaute Brücken zu testen und zur Schau zu stellen. Wir haben diese in einem Workshop zu 3D-Druck verwendet. Die Idee hierzu stammt vom zdi:…
Wydruk około 3,29 €–4,02 € nettoWstępna wycena jednego wariantu
Version 2 – Lens Cap for TLR (Bayonet 1) with Mounted Filter With this design you can keep your filter on and simply place the lens cap over it to protect your TLR lens. Compatible with TLR Bayonet 1 (Aires Reflex, Rolleicord, Rolleiflex…
Wydruk około 1,24 €–1,52 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Smooth rolling spool holder modification for Core-One+ and Core One L printer spool holders. The yellow part shown is the existing bayonet base that mounts to the printer. The rest replaces the crooked post that leaves your spool hanging…
Wydruk około 0,06 €–0,08 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This box hangs on the edge of a basket, holding crayons, pencils, and whatnot, alond with a laminated card the full width of the box. Print without infill, and with no solid bottom layers. Give it just enough solid top layers that, where…
Wydruk około 0,17 €–0,21 € nettoWstępna wycena jednego wariantu
You need to melt a threaded insert (4mm metric) to the upper part and screw it together. The hinge ha a hole for an 2mm metric screw with a screw nut. Maybe you need to tape the cockpit to avoid damage.
Wydruk około 0,96 €–1,17 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A sharpener to restore the point on jumbo crayons ≤ 15mm diameter, with 4 point styles: Fine Cone - for fine detail Standard Cone - for everyday use Blunt Point - durable and consistent line Bullet Point - great for toddler play This…
Wydruk około 2,28 €–2,79 € nettoWstępna wycena dla PETGMateriał u źródła: PET
https://www.laskakit.cz/lyonzg-s-360-24-modulovy-napajeci-230v-ac-dc-zdroj-24v-15a-360w/
Wydruk około 6,79 €–8,30 € nettoWstępna wycena dla PETGMateriał u źródła: PET
These containers come in sets of 6 which fit into each other, so they can be stored efficiently. The sets differ in their heights. use a bayonet lock (twist/click lock in 3D-printing slang) with a nice click due to some springy elements,…
The "Voronoi Beyond Sight" sculpture is an excellent piece for 3D printing enthusiasts looking to explore the intersection of art and technology. The model is designed with a Voronoi pattern, a natural pattern that resembles the random,…
Crayon hedgehog. Put the crayons in the holes and make the hedgehog spines. Original size of the hedgehog is for thick crayons, if you have standard thin ones you can scale down the model about 20-30%
Printing instructions This guy, as is often the case, comes in two parts. A main bust part, and a base part, which are printed separately. FDM This one is very simple to print on FDM. You just plop it down onto the bed and print. Just…
My takes on the NPCs and Creatures from The Wild Beyond the Witchlight are unofficial Fan Content permitted under the Fan Content Policy . Not approved/endorsed by Wizards. Portions of the materials used are property of Wizards of the…
Frieren's Mage Staff - Sousou no Frieren / Frieren: Beyond Journey's End Red Fabric to wrap around the staff's head is not included. Thread the corner of the fabric through the bead and secure with adhesive. This build fits schedule 40…
Stuff you'll need: 1x Garmin insert (I took the one that came in the box, remove and keep the 2x M3 screws) 2x M4x8 SHCS such as these - https://boltdepot.com/Product-Details?product=6392 Start by screwing the printed model onto the…
Update: the model had a small flaw, but that is fixed now. A Bayonet prop, that i hope you can use. Happy printing!
This adapter system wraps the edges of an ERYONE 1kg 196x62mm cardboard spool in order to: provide smooth rotation within a Bambu Lab AMS prevent carboard debris from depositing within a Bambu Lab AMS Features: Reusable ERYONE nameplate…
M9 Bayonet || Dimensions | (100% for real size) X: 98.75mm/ 3.89 inch Y: 317.5mm / 12.5 inch Z: 35mm / 1.38 inch NOTE : Dimensions are approximate and may not match the original precisely. Additional Information | NOTE: Requires…
Just a remix to make the AMS spool adapters work with Eryone cardboard spools.
Update November 2024 NEW 10xx version: I added an elongated version of my GarYon v4 design to match larger bike computers. Durability experience: Until today I rode about 3500 km with the reinforced original design without any integrity…
Stark's Axe These parts fit onto a schedule 40 1" PVC Pipe. The seven small alignment pins and 2 large axe head threads should be printed lengthwise for maximum strength (I use 6mmx50mm wooden dowels bought off of Amazon). It is suggested…
I needed a simple stand for an additional Home Assistant Raspberry Pi kiosk I am adding to my home – so I whipped this up. You’ll need some 2.5mm screws for assembly (I used socket head cap screws). Add some rubber stick-on pads to keep…
1.1 replica of Scarborough fair from Bayonetta features of the model include an opening barrel as well as a lipstick bullet :) file contains all the parts to build each of the 4 weapons :) wanna see what is im working on next? have a look…
I found this funny sign on the internet. Since there was no mmu version yet, I simply traced it and prepared it for multi-colour printing. This makes it possible to print the sign from top to bottom so that the prettier front side is on…
The "Slimterface" is a DIY facial interface for the Bigscreen Beyond VR headset, created by Sporky on the Bigscreen Beyond discord, later modified by Val to be more universal and give more FOV here is why you would want to make your own:…
I designed this stand for the awesome Moon Lamp from https://www.prusaprinters.org/de/social/17340-frank-deschner , because unfortunately I have not found a holder in this style. I have made the hole for the lamp exactly 26,70mm. I…
The print consists of two parts. Print them separately and slot them together with some glue.
Scale to 300% for life size measurments except base. blade is spit in two parts for easy print just needs glued. You will need to use a raft to print the ring part.
replica model of the m9 bayonet knife from counter strike Designed so that it can be printed by smaller printers like the Prusa Mini or Bambulab A1 mini For optimal results, the printed model needs to be finished by sanding or smoothing…
To open the case more easily, squeeze above the cutouts on each side! Consider subscribing to support to our YouTube channel to support us!
People might(not) have noticed that the Intex Deluxe skimmer has bayonet connection on the inside. I made a bayonet adapter to quickly connect a 32/38mm vacuum hose to it which makes switching inlet hoses a thing of the past.
(If you find any of my models for sale online (ebay, amazon, etc) it is not me, i do not sell prints; especially not at those insane prices. They are all listed as non-commercial works. I do not have a patreon or kofi or any donation…
Printable CS:GO Bayonett from the Videogame Counter-Strike Global Offensive TOTAL LENGTH: 270mm Blade+Handle Simply Scale up if you want a bigger Knife. -NO Supports Needed -Material and Color doesn't matter -Recommented Layerheight:…
Soporte de Garmin para el manillar de canyon h31. El soporte original vale 30€, entonces pensé y si lo hago con la impresora. Después de muchos modelos y diseños diferentes he conseguido este, está en proceso y aceptó propuesta de mejora.…
This model is compatible with the lego system.
A mirrored lotus ring gifted to Frieren by Himmel while adventuring. This is for people who want extra props while cosplaying Frieren or Himmel. Print with Resin and an advance warning that this print will be very delicate. The inner…
I wanted a pencil crayon case with flip up holders like you'd see on a case made for drill bits. The whole case prints in place. It can hold 24 pencil crayons. This is my first draft, and it could use a bit of refinement. One thing I'd…
Thanks to Vince94520 for the bayonet fitting part of the design. His original is here https://www.thingiverse.com/thing:2897934 This locks onto my Festool Domino very well. I needed a 35mm inner diameter fitting to fit my Siemens vacuum.…
The GEAR GROOVE Garmin Mounts are sold out on the website, so I added the lock made by @Trunda_1437739 to a GEAR GROOVE model. Included are 2 .3mf files; one in normal orientation with ironing on top level, but the upside down orientation…
This is a model for the batarang used in batman Beyond tv series.
if you like this kind of stuff consider supporting me on my Patreon www.patreon.com/wekster
I made this mold for the Crayola Crayon maker from 2001 that my wife had. The original mold had completely deteriorated and replacements aren't available from what I could find. No mold release was needed for the most part as long as the…
Do you like it? Please consider to buy me a cup cup of coffee . That would make my day! UPDATES 2023-05-05 Do you want to replace the cap with a shutter? Then have a look at Thomas1234 shutter:…
Minimalist Garmin Varia seat post mount for Canyon Ultimate (2024) D-shaped seatpost The seat post should be printed in ABS or another semi-flexible material Required hardware: 2x threaded heat set insert M3 x 5 x 4mm (Voron standard…
This wall sign designed to be printed using multiple colors and changing them during the print.
As any Colorado or Canyon truck owner knows, the first must have accessory is a tray/organizer to make the cavernous center console space a little more useful. This tray covers the entire console area for models without the USB charger…
quick support-less print to replace your Bigscreen Beyond's cable clip in case you broke it UPDATE 1: -original renamed to V1 -added V2, different clipping style to minimize wear on the cable UPdate 2: -added V2 vertical for better…
Canyon Sender CFR - Miniature DH Bike Frame is designed from the scratch. The rear hub with a cassette includes a ratchet mechanism – you just need to add a small, squishy material (like a sponge) to produce the iconic ratchet noise! All…
S'imprime en deux pièces qui s'emboite. no support 20% infill
No more scattered pencils! This practical and stylish box is designed to safely store up to 24 colored pencils or pens with a length of approximately 175 mm and a diameter of up to 8 mm . Perfect for students, artists, and creative souls.…
2024-07-25: Dust was getting in where the print slots into the CPAP. The V3 design has a much tighter fit which should help alleviate the issue. I recommend adding tape around the connection where possible. 3M 2091 filters are about the…
Dies ist ein Adapter für die Papppulen von Eryone. Damit lassen sich die Spulen benutzen ohne sie umzuwickeln und ohne die Gummirollen des Bambulab AMS zu beschädigen. Layherhöhe von 0,2 ist vollkommen ausreichend. This is an adapter for…
The old design is for looks and the new design is more load bearing and can possible by used in action.
I really enjoyed working on this model of the galactic starcruiser Halcyon. I made it as a Christmas present for my father-in-law who recently went on one of the last voyages before the experience closed at Disney World. I added a lot of…
Nikon F mount bayonet. This is the camera bayonet, so you can attach lenses to it. This is not the common cap bayonet, it is oriented like the one in the camera, so you can attach lenses and adapters only in the right position. You can…
This is a 3M filter compatible mount I made by measuring the suction side of a 3M filter. It's probably not exactly correct, but it's close enough to work for me. I used this as a component for my 3M filter to radial fan adapter:…
I was inspired by the design @InverseInduct_233286 made for the AirSense 10 to make a bayonet adapter for the AirSense 11. While still in beta I've been using/testing this and it seems to work pretty well. I'm testing ABS prints now in…
Sign with guy on toilet and text “everyone is a 3d printer - Dont forget to clean your nozzle” Funny for in your makersspace, bathroom or just as a funny gift.
Modelled after the Canyon GP0257-01 Cable Clips. Print them standing up for optimal strength. 2 versions Brake line 5 mm - shift 4 mm (95% of bikes) Brake line 6 mm - shift 4 mm (Older bikes)
Designed this pot because all the other vase-mode ones I printed kept breaking. It works particularly well with satin and shiny filaments and still prints reliably if you tweak the scale. If you’d like to support my work, leaving a ♡ like…
Made this Bayonet in fusion360. The Pins help with alignement if you decide to print this in two pieces and glue it together. Print settings: 0.15mm, 15% infill, support: if one piece yes if two no.
First of all, big thanks to the creator (MediaMan3D) of the original adapter rings and clips; great design and work! The original designer has created an adapter ring and clips that fits the plastic spools of Eryone, but the clips do not…
These new Eryone Cardboard spools do work rimless but after many prints I noticed the cardboard started separating. So I made this Spool Rim to protect the cardboard and to offer better grip for your Bambu Lab AMS. Note: This 202mm…
Modular Inlet/Outlet Jet Nozzle System This set includes interchangeable inlet and outlet jet nozzles designed for use in intex pools. All components feature a robust bayonet-style twist-lock flange for quick and secure installation…
This is my second CS:GO knife where I used a little bit different of a technique to form the blade part. It is a lot easier to print. You will have to glue the handle to the blade but when I did mine it seems to hold up very well. Please…
The butterfly hair piece that Fern wears. There is a slot for a wire slide comb (purchased separately off of amazon) to fit that holds it to the wig. The suggested type of printer is MSLA resin, but if you use a FDM, I can't stop you.…
Simple but very nice 2d wall art Frieren
This is a project I've been working on for waay too long. "It's a fairly simple looking model, how long could it take?" Ohh how I regret my past decisions. Why did I decide to make this printable in multiple colours and in seperate parts?…
Funny Sign - "Everyone has the right to be stupid, but some people abuse the privilege" Complete with recesses for 10mm x 1mm magnets to make the sign easily mountable on any flat ferrous surface. One of the files is a multi-object file…
Fern's birthday present from Stark while the party is travelling. The mirrored lotus design is traditionally given to one's sweetheart…not that Stark knew of this at the time. This is for people who want extra props while cosplaying Fern…
Der optimale Spulenadapter für Eryone Kartonspulen. Nach zahlreichen Versuchen mit verschiedenen Spulenadaptern, blieb das Filament oft aus vielerlei Gründen im AMS, hängen. Daher habe ich einen eigenen Adapter konzipiert. Seine Montage…
The official Bigscreen Beyond Audio Strap CAD model data! Useful for designing modifications or replacement parts, or for 3D printing accurate models. (Please remember to refer to your Bigscreen Beyond warranty as certain modifications…
Bigscreeen Beyond Quest 2 strap adapter! what else to say? recommended print settings: -0.2mm layer height -0.4mm line width -3 perimeters -3 top/bottom layers -25~50% infill -"Outer before inner wall" is highly recommended for the best fit
This is a holder for Garmin Radar Varia for a Canyon Aerorad bike. For seatpost SP0077 This is printet in PETG with 40% infill. Feel free to use. Desigend in Autodesk Fusion 360 I will make a version with pressfit nut also.
replacement Karcher bayonet adapter 1/4 Applicability: Karcher K3, K5 and similar Compatibility: aliexpress sky Category: Parts
Toolholder for wall mounting your festool centrotec and fastfix attachments. If you only plan to hang your centrotec attachments, you can just print the first part. If you plan to use the fastfix part you should print the second part.…
I wanted a smoother version so i created this batarang and when printed twice, use superglue to attached both pieces and your ready to defend Gotham City. Print Settings Rafts: No Supports: No **Resolution:** Fine is better Infill: 20…
This is a simple but clever container. The lids locks firmly in place with a Bayonet Mount. Easy to print, with no supports. Diameter: 85 mm Heigth: 70 mm If you need another height or diameter let me know!
Modified a computer mount design I found to be compatible with Garmin computers.
Himmel's (replica) Hero Sword - Sousou no Frieren / Frieren: Beyond Journey's End This build uses a piece of ¾" Schedule 40 PVC pipe to attach the Hilt to the Grip . If PVC pipe is unavailable, print the Connector piece. The CloakClasp…
A variation of my [Art Pencil Holder](https://www.prusaprinters.org/prints/63392-art-pencil-holder) for crayons. This model is inspired by this very sleek design , but I redeigned it from scratch in Fusion 360. I wanted a base and a lid…
Small, easy-to-open pill box with bayonet catch and various lids. Dimensions: Lid Diameter 44.00 mm Height 11.00 mm Box Diameter 40.00 mm (inner diameter 34.00 mm) Height 30.00 mm (height inside 28.00 mm) Total height 32.00 mm Print:…
Pot à crayons composé de 4 éléments : 1 corps et 3 inserts. Aucun support n'est necessaire ------------------------------------------------------------------------ Pencil holder composed of 4 elements: 1 body and 3 inserts. No support is…
This is a kit I made to make the Vive DAS (Deluxe Audio Strap) useable with the Bigscreen Beyond Thank you @whinnyrab (RockyRob) for images and testing as I'm still waiting for my Beyond to be made. Thanks to @CompatibleVRC for helping me…
Note: The large spool diameter is 77.6mm and the small spool diameter is 75mm Updated 7/23/2023 to add a second spool which accommodates a smaller diameter cardboard spool. See the version with “SMALL" printed on the spool side. Updated…
DISCLAMER: You are solely responsible for your health and safety by choosing to use this non-approved adapter. Adapter to allow 3M bayonet filters to be used with 3M Adflo blower. Replaces the stock filter and filter cover and secures…
It is known as the largest abandoned structure in the world, and even once the tallest hotel anywhere. Known as the 'Hotel of Doom' the Ryugyong hotel in North Korea sure has an interesting story, dating back to 1987. The building stood…
