SonicSkim – High-Speed GEV (Ground Effect Vehicle)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
3D-printable GEV for speeds from 10 km/h to supersonic, using a shockwave bow for high-speed stability.
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 66
- Makes
- 0
- Views
- 419
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Vehicles & Machines
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
🚀 Glide Fast. Glide Smart. This 3D-printable Ground Effect Vehicle is designed for everything from smooth 10 km/h cruises to supersonic speeds with a shockwave bow for stability. Experience the future of high-speed transport, right from your print bed! 🌊✈
Printing Instructions:
The SonicSkim GEV is designed to be printed in place with supports enabled for optimal structure. Use the following settings for best results:
- Layer Height: 0.2–0.3mm
- Supports: Required (enable auto-generated supports)
- Infill: 15–30% for strength and lightweight performance
- Material: PLA, PETG, or ABS (PETG recommended for durability)
- Bed Adhesion: Use a brim or raft to prevent warping
- Cooling: Recommended for overhangs
Ensure proper support removal post-print to maintain aerodynamic integrity. Light sanding may improve airflow.
After printing, test in low-speed environments before increasing velocity. For supersonic testing, advanced materials and propulsion methods are required. 🚀