SonicSkim – High-Speed GEV (Ground Effect Vehicle)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
3D-printable GEV for speeds from 10 km/h to supersonic, using a shockwave bow for high-speed stability.
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 66
- Wydruki
- 0
- Wyświetlenia
- 417
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Vehicles & Machines
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
🚀 Glide Fast. Glide Smart. This 3D-printable Ground Effect Vehicle is designed for everything from smooth 10 km/h cruises to supersonic speeds with a shockwave bow for stability. Experience the future of high-speed transport, right from your print bed! 🌊✈
Printing Instructions:
The SonicSkim GEV is designed to be printed in place with supports enabled for optimal structure. Use the following settings for best results:
- Layer Height: 0.2–0.3mm
- Supports: Required (enable auto-generated supports)
- Infill: 15–30% for strength and lightweight performance
- Material: PLA, PETG, or ABS (PETG recommended for durability)
- Bed Adhesion: Use a brim or raft to prevent warping
- Cooling: Recommended for overhangs
Ensure proper support removal post-print to maintain aerodynamic integrity. Light sanding may improve airflow.
After printing, test in low-speed environments before increasing velocity. For supersonic testing, advanced materials and propulsion methods are required. 🚀