189 modeli
Nate From IT. Shrink it to the size you need. He is a bit of a cannibalistic Geanstealer. But will also fix the database. works for Arcana Solutions.
Wydruk około 3,83 €–4,68 € nettoWstępna wycena jednego wariantu
Designed to rackmount a Synology Rackstation Ideally print in PETG or better PLA would warp under heat in cabinet
Wydruk około 1,13 €–1,39 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A tool for audio and video service technicians. The diameter of the straps can be measured from 1cm to 13cm.
Wydruk około 2,07 €–2,53 € nettoWstępna wycena jednego wariantu
Support la crosse technologie by Mika version 2
Wydruk około 5,22 €–6,38 € nettoWstępna wycena jednego wariantu
Important notice: First thing is first:) This design is free for the benefit of the community, but If you like my designs and want to contribute, you can make a donation to buymeacoffee or paypal, that will be greatly appreciated. I know…
A seamless tile that can be used in multiple copies to create something in large scale. The dimensions are a bit odd [196x245], but was trying to create a cover for my laptop. Print at 100% infill with a layer height of 0.08mm with a base…
This is a case for the Wio Tracker L1 from Seeed Studio which can fit the Meshnology 3000mah 755060 battery. Makes a good standalone Meshtastic device with the new firmware which has the virtual keyboard. Update 6/12/2026: Added step…
2.5" inch HDD/SSD holder for Synology DiskStation NAS It is suitable for both 7mm and 9.5mm height disks Equivalent to Synology Disk Holder (Type C) I have made it for my DS118, but in theory it should be also suitable for the following…
This is a small SSD mounting adapter for my Synology DS218+. Theoretically this should also work for other "slot"-type drive cages. Note that the latch is missing the little pin on the front. Original source for the adapter plate:…
These are replacement keys for Synology NAS like DS918 or any other with 3,5" Hard disks with a Key lock. I use this in my private environment because there is no extra safety needed (These locks aren't safe anyway). It's also nice to…
I lost my original keys (found them eventually) so I found a few 3D printable ones, but I didn't really like them, They were nice and functional, but I wanted more of a standard key looking one that could sit on a keychain. There are 3…
I've added newer texture versions that should be easier to slice.
Replacement Parts for my Synology NAS DS414. Applied Models: DS211+, DS212, DS212+, DS213, DS213+, DS214, DS214play, DS216, DS216+, DS216+II, DS412+, DS413, DS414, DS415play, DS415+, DS416, DS416play and DS916+ Category: Computer
These brackets can be used with any of the Synology DiskStation 2 bay Plus, Value, or J series NAS: DS218, DS223j, DS223, DS224+, etc. Space the brackets 140mm apart and the flange will trap the Synology's feet preventing it from sliding…
I designed this front plate to house my Synology DS 920+ at the bottom of my RackMate T1. Included Keystone and non-Keystone versions. After a few failed prototypes (RIP my filament), I finally got the measurements right. The DS920 is…
Vibration dampening support to be placed under the NAS's square foot. May fit any model that uses the same 13 mm side foot. To be printed in TPU - for my usage, with only one “heavy” 3.5" hdd installed printing it with two walls, 0.2 mm…
German: Ein kleiner schnell gedruckter Schlüssel, um die Festplatten der Synology NAS Boxen absperren zu können. ========================================================= English: A small, quickly printed key to lock the hard drives of…
Wall mount for the Synology DS220+
My main goal is reliability. It's a very robust design but on the other hand it takes a long time to print There are two holes for 6mm screws. The shelf is ventilated from below so as not to disrupt air flow. Please see the plan with…
Pour accrocher un routeur WiFi Synology MR2200ac au mur. La ventilation par le bas et le passage des câbles restent assurés. Des ergots empêchent le routeur de basculer. Ces ergots permettent d'accrocher le MR2200ac au plafond s'il est…
These keys can be inserted in the lock hole and help you identify the drives, as well as twist to unlock Print the pegs separately, then add a drip of superglue and insert into the key, if it does not fit simply sand the edges a little.…
A Simple Holder for DS218 and DS218+, DS220+, and DS214Play. DS216+II Print Settings Printer: A30 Rafts: No Supports: No Resolution: 0,22mm Infill: 25% Filament: Janbex PLA RED Post-Printing Mount it to the Wall I recomend to use Screws…
I wanted some larger key/numberplates because the originals that these were based on were a bit difficult to get a grip on. Source Fusion 360 file included. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No…
This case was designed to fully encase the camera visor to protect it when the phone is set on a table. The case sides are lower than the top and bottom bumpers to allow easy back swipes from either side. The USB cut out breaks out…
Modifications to fit a physically largery battery
Synology DS218+ Dust cover 群晖DS218+防尘罩
Made from scratch, but from an idea seen here : https://www.printables.com/model/1313628-technologies-cards-stand-for-twilight-imperiumhttps://www.printables.com/model/1313628-technologies-cards-stand-for-twilight-imperium I've added the…
This is a podest for a Synology NAS to provide some extra space underneath the device. It also comes with a drawer. The drawer handle can be mounted with all kind of screws thicker than 3mm. I used an 5mmx40mm screw to fix it. Files…
Technology Outlet is a 3D retailer based in the UK. I purchase their Copymaster3D filament, which I believe to be of reasonable quality and priced accordingly. They are now using cardboard spools, which they said would work fine in the…
Designed for use with the guns original/stock rubber shoulder pad.
This is a heavy duty wall mount for a Synology RT2600ac router. I used #8x1/2" screws to attach the router and #10x1-1/4" screws to attach the mount to the wall. Print Settings Printer Brand: Prusa Printer: i3 MK3 Rafts: No Supports: No…
Lovely router by all reports (I haven't actually set it up yet), but the steep angled legs make the built-in mounting slots rather ridiculous. They're an inch away from the wall and tilted at about a 26-degree angle. CAUTION: Synology's…
Made this mod for my Synology DS920+, which is placed inside a bookshelf. The vibrations from the HDDs resonated into the wall and made a lot of noise. After attaching squash balls to it, the vibrations inside the shelf plate is greatly…
3D Printing Terminology Visual Displays by okayauco - Thingiverse
New version here → QIDI-TECH X-Max/X-Plus Ratchet Dials - V2 I think these should be the default on any printer, as the lock nut system is annoying, and the printers that have no lock nut, well lets say, is frustrating to have to keep…
My Synology NAS was making too much noise from vibrations so I remixed a Bambu Lab vibration dampening foot to work with the large Synologies. I printed in 95a TPU, but PETG could be a viable alternative as well if printed without the…
A simple shelf and plate for the Synology DS215j NAS to fit into a 10" Mini Rack. The size of the opening for the NAS is 101mm x 161mm - this may work for other similar sized NAS units but no guarantees. Smaller printers like the Ender 3…
A shelf just big enough for a Synology mesh router, model MR2200ac, from which the router can't be removed unless the shelf is first removed from the wall. This ensures that the router can't fall off. Here's how it's done: Print the…
Mises à jour 14/02/2023 Plus esthétique que fonctionnel, si vous avez imprimé la V1, cela ne vaut pas la peine de réimprimer la V2. Si vous n'avez pas imprimé la V1 alors imprimez la V2! Sécurité Panneaux SUNOLOGY pour empêcher les clips…
A cradle designed to hold the 100W power adapter for certain Synology DiskStation NAS units. Specifically, the model “Adapter 100W_2” AKA “Adapter 100W Level VI” (Dimensions 13.7 x5.9 x3.5 cm, currently used by NAS models DS920+, DS918+,…
Hard Drive Tray Compatible with the Synology line of NAS' that use the D5 Tray. Does not have 2.5" mount holes.
This is a Synology DS218/DS220/DS224+ Stand to reduce noise and vibration. It also helps with better ventilation. You need door seal stripes at the bottom of the stand with a 9mm width. I used these:…
The AGN Vixen can experience loss of barrel alignment of a few centimeters when pressure is applied to the shrould either by holding the shroud or resting it against a support. This washer fits snugly into the small space between the…
A 3D print model for a Synology drive bay key provides an affordable and practical solution for replacing or duplicating the small, often misplaced keys used to secure Synology NAS drive bays. Designed with precision to fit Synology lock…
Redrew the original from @UnluckyForSo_3537297 and modified it to better fit custom racks and Synology on a rack shelf. Redrew the original and modified it to better fit custom racks and Synology on a rack shelf. Having the NAS on a shelf…
I wanted my router to be installed on the outer side of my servercabinet, screws are therefore not possible. Therefore I created a very simple but 100% fit wallmount for Synology RT6600ax Router. Entire size is designed to fit exactly one…
Remix of kai's HardDriveHolder D7 Applied Models: DS211+, DS212, DS212+, DS213, DS213+, DS214, DS214play, DS216, DS216+, DS216+II, DS412+, DS413, DS414, DS415play, DS415+, DS416, DS416play and DS916+
Two easy-to-print hooks for adding an additional drive - WD Passport - to your Synology DS218 server. Add adhesive felt pads and everything will sit tight.
Simple wall mount for the LaCrosse Technology BC-900, BC-1000, and BC-700 battery chargers. However, I cannot confirm as I do not have this or related models. Based on a couple of requests. I just added a countersunk screw version…
Keep your NAS power plug secure by using the Kensington Security Slot! Specs ✅ Synology DS220j compatible Print tips 🧩 1 part ⮑ Print original orientation from the STL ✨ Support free! 🏋️ 15% infill 3 perimeters can help with strength PETG…
This part is to replace the lock/latch on the Synology drive caddy/tray. This piece is recommended for Resin printing, but FDM can work well. This part is very tiny (~15mm in length) - Excellent bed adhesion is REQUIRED. Note: The added…
This was designed to house my Synology DS 418 at the bottom of my RackMate T1. It may be possible to install this solution at other positions but this was not my intent. Same goes for other models of Synology NAS units. In my case…
Not locking. Does not fit 3.5-inch drives. Requires 4 M3x5 countersink screws to mount.
Wall mount holder for any 1-bay NAS.
Update. V3 is now printed on the back with a support slicer on the bottom for better support on the NAS. So for many years now I have enjoyed using Synologys NAS server solutions. Ive been through different models, and for the past 10…
Synology only lets you lock the drive bays, but not the buttons. You can turn of the led lights, but if you child is very persistent, it will find the button anyway. I created a cap that hooks to the usb port of the NAS that sits on top…
The Synology WRX560 wireless router/access point doesn't have any holes or come with any wall-mounting hardware. This model offers a solution by providing a wall-mountable platform with clips that hold the router securely. Requires…
Synology DS220 NAS mount Hanger
to be screwed with the case screw under the power connector
Elevate your MOES smart switch with a wall mount that matches its performance—this clever and modern wall mount. Specially designed to accommodate this intelligent switch, this wall mount offers easy and secure installation. Its sleek and…
Replacement drive rail for the Synology D6 drive trays. Not sure how I lost mine, but I have them missing from 2 of my trays. I printed in ABS, although I don't think heat/warping will really be a problem, but I'd rather be safe.
Made for the Synology DS1522+ Disk Station. Things you need: 4x Squash balls, 40mm diameter (2 yellow dots) 4x ISO 10642 M3 x 10 mm Screw 4x DIN 934 M3 Hexagon Nuts
Inspired by: https://www.printables.com/model/969418-synology-ds-1522-anti-vibration-stand
Another School logo, this time it's for Massachusetts Institute of Technology or MIT. Two STLs, the base and the shapes for the logo itself. The shapes for the MIT are chamfered on the bottom so glue will be needed to fix them…
Print upright. 0.2mm layer height. Brim .
this wonderful demonstration of 3d printing terminology needs some tweaking and editing in order to print correctly, and none can be found online. so this is the same models of the original creator but pre edited with modifiers in 3mf…
Als ob es nicht schon genug gäbe, aber es gibt nur wenige in 2-Komponenten-Ausführung :) Haken aus TPU, 100% Füllung. Box aus PLA, etwas Unterstützung für die kleinen Zahnbürstenhaken, mehr nicht. Ob viel oder wenig Infill spielt wegen…
A simple case for yet another USBasp dongle. This one has “USBASP v2.0 LC Technology” markings on it.
Step Jaw for E-Vise V2 by FFFTechnology To Lock a Print on the top of the Jaw.
My first model, simple and overkill, but effective. Takes about 1.5 hours to print, print two for both ends. Print in TPU without supports, with the following parameters: Material: CR-PLA_1.75 Layer Height: 0.15mm Wall Line Count: 3 Top…
Mounting bracket to hang the power adapter from a Synology DS225+ NAS on a wall. I forgot to make the slot for the cable on one of the pictures, i just used a saw to cut this after printing and added the slot to the model before…
Science and technology cookie cutters - atom size: 80.47 x 89.17 x 15.00 mm (3.17 x 3.51 x 0.59 in) Contains **2** .stl files with different style impress: **★ Stamp + Frame** (A dual-function tool that cuts out the shape and…
This filter module belongs to the @planttechnology air intake system. It is lightproof and filters dust. If you use Bambu Studio I recommend you to open the .3mf file there and the corrects stettings for your printer will be importet. If…
Synology DS220J Wall Mount brackets to mount the NAS to the wall. Please be aware there is only one rotation for mounting as it has one filleted side and one chamfered side.
Download my full Seti insert (picture 5 and 6) For the best look, print in multiple colors as in the pictures. 🪐 Technology tile holders with storage box for Seti. Designed to keep all technology tiles organized, easy to access, and…
This model is inspired by Synology DS 1522+ Anti Vibration Stand by reserve and Synology DS923 antivibration stand by Adam Nuclear , but made from scratch in OpenSCAD using BOSL2 library to fit DS920+ specifically. Using this stand has…
At my current apartment complex the main door and lift use a RFID HID Prox system to give residents access. After moving in we decided to install a smart lock on my apartment's front door. The Yale Unity uses more modern and secure Mifare…
WARNING: This model is intended to be printed with modifier meshes to allow for airflow. The original M.2 slot covers do not allow the use of M.2 heatsinks, as they collide with the clips. This redesign used a slightly different machanism…
Designed a strong wall mount for Synology Diskstations with two drives. I wanted the Diskstations to be easily removed from the mount, so I added a gap in the wall mount where the feet of the disk station fall into. The model consists of…
This is a basic enclosure to house the Meshnology W10 LoRa AIoT development board plus the screen that it comes with. I bought one of these kits on Amazon and couldn't find that anyone had designed a case for it yet, so I did. This is…
Remix of kai's HardDriveHolder D7, which didn't fit in my DS1815+. It is not that pretty, well, it was, as it came from kai, perhaps I will do some further improvements. But in this state it will work just fine. Appreciate to get some…
Moved the power switch location. Original can be found here: https://www.printables.com/model/136905-psu-cover-for-crealety-ender-3-v2
These are stands for displaying Technology cards in the board game Voidfall. They are designed to improve card visibility and reduce the footprint of the game on the table. The Technology Tableau displays up to twelve different Technology…
Da mein NAS unter meinem Schreibtisch montiert ist und mein Sohn gerne Knöpfe drückt (vor allem leuchtende), habe ich diese Abdeckung entworfen, damit er es nicht ständig ausschaltet. English: Since my NAS is mounted under my desk and my…
Replacement HDD tray lock for my DS916+. 3 of thous were broken after bad packaging during shipping. Fits for DS211+ and possibly other similar models too.
small casing for LC-Technology 4 channel relais card. more information: https://templates.blakadder.com
Changes 1. Removed the fan relief to mount different fans. 2. Added Filter hold to mount air filter mates.
screw connection for conecting 50mm pipes with other technology via 1 1/2" PETG is working quite well, but rather would use PC or ASA
No supports required. 0.2 layer height 2-3 perimeters Printed in PETG for outside mounting in weatherproof box
Райзер предназначен для 3д принтера Qidi Q2. Высота 45мм. Стекло можно сдвинуть (как на стоке), и поднять на 90°. Печатать с поднятым стеклом, я бы не советовал. Выкручиваем винты (2шт) крепления верхней крышки. Укладываем райзер и крепим…
Wallmount for Synology NAS. Level, four screws, put on top. Done. Best for SSD NAS I guess the classic drives can rattle. You may need to isolate.
Sliced from Fusion360 to Prusa Mini directly, works well in PLA with default settings.
Cleaned up the baseplate a little and added LEGO-compatible studs. Made the peg LEGO-compatible as well. I used LEGO style bricks from https://www.thingiverse.com/thing:377523 without alteration. Category: 3D Printing
Small support-free quick-print items to demonstrate immunology concepts
I modified this model to fit Synology D8 (1813+ etc) drive bays. I initially printed the original model thinking it would fit but it didn't, one exacto knife cut later and it fits! so I quickly modified it in Prusaslicer and boom! new…
During play, I was annoying with the Tech Cards. I wanted to have Structural and Combat separated, which are blocked, which are Projects. And then within unblocked Technologies, I liked to have my Argo Abilities separated, my Negotiation…
A bracket to mount the Synology DS224+ under the table.
sign, pause halfway the print and change colors for extra contrast.
Skadis Mount Brackets for Synology DS223 NAS Remix of the wall mount from @Hemi345 and the skadis supports from Ryan Plourde These brackets can be used with any Synology DiskStation 2-bay Plus, Value, or J-series NAS: DS218, DS223j,…
Wanted to try using a TPU stand base instead of the foam rubber strips. Only made it 2mm thick. Might try thicker later but going to give this a try for now. You're free to go thicker in your slicer. 15% infill sounds about right. 2-3…
![Technology Themed [seamless tile] - Hueforge](https://media.printables.com/media/prints/522390/images/4225725_854f5b47-2750-48fd-b1ad-49b37f32fcba/photo_2023-07-07_22-53-49.jpg)
