MDD Direct Drive Clone Hero Me Ender 3 Gantry Plate
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Gantry plate for Hero Me to fit the cheaper MDD plates (not from PrinterMods) available in countries outside of the US
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 42
- Makes
- 0
- Views
- 1,200
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Creality Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
Backstory
I purchased one of the cheaper knockoff MDD v1.2 (Modular Direct Drive) plates and was unhappy when I found that the holes for the gantry plate were not aligning. Therefore I remixed the original gantry plate adapter (PM_CR-Ender_OEM-MS_Gantry_Adapter_5A) from the HMG6 to fit the two threaded holes in the MDD plate.
The relative positions of nozzle and ABL mount as well as their heights are unchanged. I slightly modified the spacer for the hotend to make room for better air flow from the hotend cooler.
Models
I uploaded two versions, one with chamfers and one without. I always like to have rounded corners, since the printers are unable to print right angles anyway. However, if you don't like it use the _NoChamfer version.
Printing:
- No supports required
- Infill: 35-50%
- Walls: 4
If you have questions or like this print, consider leaving a like, comment or a make. Thank you!