1 / 4
Fitech Handheld Encloser And S10 (1st Gen) Steering column mount. — image 1
1 / 4

Fitech Handheld Encloser And S10 (1st Gen) Steering column mount.

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Steering column mount for the FiTech handheld. Secure bolt-on design, printed with supports and 15–20% infill.

Rating
0 / 5
Likes
4
Downloads
45
Makes
0
Views
262
Reviews
0

Updated at source:

Model information

Category
Automotive
License
Creative Commons — Public Domain

*PRINT WITH PETG*  This mount securely holds the FiTech handheld controller right on top of the steering column, giving you a convenient viewing position for monitoring your engine while driving. It uses four M4 screws and two M4 nuts total:

Two M4 screws attach the lid to the mount box.

The other two M4 screws, along with the two M4 nuts, clamp the mount onto the steering column.

The design uses a simple flat-to-flat clamping setup — no inserts or special hardware — and once tightened, it grips the column firmly. When installed, the handheld sits centered above the steering column for easy visibility. Depending on your vehicle, it may cover part of the gauge cluster, which is normal for this style of placement.

The part prints cleanly and does require supports. For the best results, print at a 0.20 mm layer height, lay the part flat on its back, and use 15–20% infill for strength without excessive material.

This mount is a solid option for anyone running a FiTech system who wants a secure, bolt-on way to hold the handheld without dealing with suction cups, tape, or the controller sliding around the cabin.

Tags