1 / 11
Filament Spool Holder, Stand Roller, 608zz bearing — image 1
1 / 11

Filament Spool Holder, Stand Roller, 608zz bearing

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Filament holder for use during printing.

Rating
0 / 5
Likes
24
Downloads
77
Makes
0
Views
421
Reviews
0

Updated at source:

Model information

Category
Accessories
License
Creative Commons — Public Domain

Supplies: 

  • 8x tower
  • 4x groove ring
  • 4x 608zz bearing
  • wooden plank 100x200mm
  • 8x little screws 2.5x19mm

 

How to make:

  1. Print 8 of the filament towers. I used PLA with 40% infill. It will be around 4 grams each, with a print time of 40 minutes. 
  2. Print 4 rings. I used PLA with 15% infill, which will be 4 grams and take around 20 minutes to print.
  3. Slide the 4 608zz bearings into the rings.
  4. Press 2 towers into one bearing with a ring.
  5. Put 2 screws through the holes in the towers.
  6. Saw a plank of 100x200mm
  7. Drill holes for the screws in the plank and crew in the towers.

Tags