Svbony Imager To Konus Microscope Adaptor
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Attaches a Svbony SV105 or SV205 image sensor to a Konus Crystal-45 or similar trinocular microscope
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 6
- Makes
- 0
- Views
- 57
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Chemistry & Biology
- License
- GNU General Public License v3.0
The Konus Crystal-45 trinocular microscope's camera port does not fit the Svbony SV105 or SV205 imager. This adaptor is a press-fit for the Svbony housing and uses the existing fixing screw to keep the imager and adaptor in place. There is a little leeway for adjustment in rotation of the imager, which is necessary as the Svbony image sensor is not quite lined up with the USB port for some reason.
The model prints without support, using a built-in cylindrical temporary support component which is very easily removed after printing. It is recommended that stray bits of print are trimmed off and the surface swiped with a flame to ensure no debris that could contaminate the optics remains.
If your print is not sufficiently opaque to light, you will see an intermittent colour cast to the image. Wrap it in aluminium foil, aluminium tape, duct tape etc.
OpenSCAD source is provided for those with printers of different tolerances or the desire to remix.
Current use case is here http://blog.reprap.org/2026/01/new-optics-for-lab.html should you have an interest.