1 / 3
Helical Gear Shaft (50T, M0.5, 17° RH) – Dual-Drive Extrude — image 1
1 / 3

Helical Gear Shaft (50T, M0.5, 17° RH) – Dual-Drive Extrude

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Bambu P1/P1P Stepper Helical Gear Shaft (50T, M0.5, 17° RH) – Dual-Drive Extruder Upgrade for Voron / Kossel / CoreXY

Rating
0 / 5
Likes
3
Downloads
14
Makes
0
Views
80
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Share Alike

Finally, a perfectly meshing printed helical gear shaft for the Bambu P1/P1P extruder stepper motor — reverse-engineered, tested, and proven.

After extensive measurement, iteration, and real-world testing, this design solves the notorious “90° jam” issue that plagues generic 50T gears. It now runs smoothly, silently, and reliably with the stock Bambu 9T steel pinion — no binding, no skipping, full 360° rotation.

Key Features:

Precision Matched: Based on actual measurement of the Bambu P1P pinion (14 tooth flanks over 30 mm → 17° helix angle, not 15°!)

Integrated Gear+Shaft: Single-piece design (no slip, no press-fit failure)

Optimized Geometry:

Module: 0.5

Teeth: 50

Helix Angle: 17° Right-Handed

Pressure Angle: 20°

Backlash: 0.20 mm (ideal for PET-CF/PLA vs. steel pinion)

Face Width: 5.0 mm

Shaft: 5.0 mm diameter, 12 mm length + 1.5 mm shoulder for axial stability

Dual-Drive Ready: Designed to replace the stock 26mm spur gear in Voron dual-drive extruders (e.g., VORON 2.4, Trinamic-based builds)

Tested & Verified: Works flawlessly with Bambu P1P extruder stepper (model: BJY36D12-04V47)

🖨 Printing Recommendations:

Material: PET-CF (best), Nylon, or tough PLA (avoid standard PLA under high torque)

Nozzle: 0.4 mm (0.5 mm also works)

Layer Height: 0.08–0.10 mm for smooth tooth surfaces

Infill: 100% (gyroid or cubic)

Walls: 6–8 shells

Post-Process: Light sanding (400+ grit) on tooth flanks improves meshing

Mounting: Center distance = 15.4 mm (critical for 9T+50T, 17° helix)

The stock white plastic gear wears quickly and slips under load. This reinforced helical gear shaft delivers:

  • Higher torque transmission

  • Reduced noise & vibration

  • Longer lifespan

  • Seamless integration with Bambu hardware (no modding needed)

Perfect for Voron builders, DIY extruder upgraders, and anyone wanting reliable, quiet filament drive.

Tags