1 / 4
Cases for Adafruit QT Py and SHT45 sensor board — image 1
1 / 4

Cases for Adafruit QT Py and SHT45 sensor board

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Tiny cases for QT Py and SHT boards w/ magnetic mount. E.g. to equip your 3D printer chamber w/ a precise temp sensor.

Rating
0 / 5
Likes
5
Downloads
31
Makes
0
Views
198
Reviews
0

Updated at source:

Model information

Category
Electronics
License
Creative Commons — Attribution — Share Alike

These are cases for an Adafruit QT Py board and a temperature sensor board like the Adafruit SHT45.

I designed them to be as small as possible, so that I can put them into my P1S 3D printer to get an accurate chamber temperature. But of course, you can use it anywhere ... maybe except outdoors :D

At the bottom are holes for 6x2mm magnets. The lids are clipped into the main part.

Since I use mine inside the 3D printer chamber, I printed them im ASA. If you use a similar filament, make sure to dial in the shrinkage factor correctly.

Print settings:

  • 2 walls, inner/outer/inner

  • 0.2mm layer height

  • 15% Gyroid infill

  • supports for the magnet holes

Tags