Panel Nut Tools Set – Wrenches for DIY Electronics
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
a set of simple tools to tighten and loosen the most common panel nuts found in DIY electronics projects.
- Rating
- 5 / 5
- Likes
- 53
- Downloads
- 140
- Makes
- 2
- Views
- 829
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
After years of pain I made a set of simple tools to tighten and loosen the most common panel nuts found in (my) DIY electronics projects. like EuroRack modules 🎛 microcontroller Project cases 🎚 ... they've made assembly much easier for me. Hopefully they'll be useful for others too!
If there's another type of nut you'd like a matching tool for, let me know.
Anyway I will add more in the next days. so check again after some time.
🛠 so far:
Knurled 3.5 mm audio jack
5,5 wrench - M3 nuts
6 wrench
7 wrench - M4 nuts
8 wrench - M5 nuts
9 wrench - Push button & toggle switch
10 wrench - Potentiomete, Encoder, DC barrel socket
Magnetic Holder/Hanger 🧲
🖨 settings:
Material: PLA, PETG or ABS
Layer height: 0.20 mm
Infill: 20
Perimeters: 3
Supports: None
Thread a thin cord through all the tools and the magnet holder. Tie a nice sailors cross-knot and pull it into the magnet holder so the knot is hidden inside. ✨ superglue a 10x2 magnet.
These tools are intended for hand tightening and loosening only. They are not designed for high torque or seized hardware.
If you find this useful, I'd appreciate a like, download or photo of your printed tools!
inspired by this model