Tesla Model Y (Pre-Juniper) Screen-Mount Sunglasses Holder – Snap-Together, No Glue
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Clip-on bar for the Model Y center screen that holds sunglasses. It prints as 2 halves that snap together, so it fits mo
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 1
- Makes
- 0
- Views
- 40
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution — Noncommercial
Clip-on bar for the 2020–2024 (pre-Juniper) Model Y center screen that holds sunglasses. It prints as 2 halves that snap together, so it fits most print beds. No adhesive or tools needed.
Fit: 2020–2024 Model Y (pre-Juniper).
Features
Fits the 358.8mm-wide screen with 0.5mm side clearance
2-piece design (~190mm per half) for standard 220–256mm beds
The halves join with a keyed socket so they can't rotate, plus a snap catch that holds them together
Doesn't cover the screen or the camera area
Print notes
Printer: Prusa CORE One, 0.4mm nozzle
Filament: PETG. Use PETG or ASA, because PLA will warp in a hot car.
Profile: 0.20mm STRUCTURAL, with variable layer height
2 perimeters, 5 top / 4 bottom layers
30% gyroid infill
Supports: organic, touching the build plate only
Brim: 8mm, outer only
Print the halves in the orientation shown in the 3MF
Files: ModelY_SunglassBar_final.3mf, halfL.stl, halfR.stl, ModelY_SunglassBar_v3.FCStd