1 / 3
JDM Shifter Upgrade for Thrustmaster TH8S(LESS THAN 80g)
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
JDM Shifter Upgrade for the Thrustmaster TH8S. You need less than 80g of filament to make this. No AMS or MMU required.
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 3
- Makes
- 0
- Views
- 42
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Video Games
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
JDM SHIFTER FOR THRUSTMASTER TH8S
Easy to Print
Uses under 80g Of Filament
Tested on the Thrustmaster TH8S
Designed Without the help of AI
Multicolor Printer Not Required
Print settings are already Included in the .3MF, Make sure to Print the Adapter too.
Use a 0.4 Nozzle with a 0.2 Layer Height, 2/3 Walls, Slim Tree Supports with a Treshhold angle of 15-25 degrees, and a big 2.5cm Brim.
Use Automatic Adaptive Layer Height, or if you need to do it manually, use 0.2 For the area until the Round Cutout, then 0.24 until the very top, use 0.1 on the round part at the top.
Make sure to use Organic/Tree Supports.