1 / 2
Scalable & Customizable Grid For Lights Modifiers
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Model information
- Source
- Printables
- Category
- Photo & Video
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Scalable & Customizable Grid For Lights Modifiers (20x20 cm)
You can easily scale this grid in your slicer to any dimensions.
Scale it higher to create a tighter beam of light or lower for more spread.
Mount with some quality duct tape or dril, melt-in (or glue-in) some magnets, nuts or any other fastener of your choice! (Velcro will probably also work.)
Handy tool for flash heads with a led modeling light!
Or use high temp filament on your own risk;-)
Print it laying flat on the bed, watch out for the upper part of the outer rim on the top side, this sticks a bit out.