1 / 16
Zip Tie Mount with screw and/or double-sided tape
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Zip Tie Mount with screw and/or double-sided tape
- Rating
- 5 / 5
- Likes
- 40
- Downloads
- 322
- Makes
- 4
- Views
- 996
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution
Zip Tie Mount with screw and/or double-sided tape
Affix to a wall or surface using the 4mm chamfered hole with a screw. Or use ½" double sided tape. Feeling crazy? Use Both. Fits small or medium sized zip ties. (Zip tie channels are 2mm x 5mm)
Recommended print settings: 0.2mm layer height, 0.4mm nozzle, 20% infill.
There is a .2mm layer that bridges right before the hole starts. That is the reason for the .2mm layer height recommendation. x1 Prints in ~14min.
Let me know how this works for your project!