X45 Sprite CR Touch Probe Zero Y-Offset Mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Added hole for heaterblock removal. Removed branding. Based off v1.1
- Rating
- 5 / 5
- Likes
- 51
- Downloads
- 257
- Makes
- 5
- Views
- 2,697
- Reviews
- 4
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- GNU General Public License v3.0
IMPORTANT the original post from KYZ contains all the necessary information on how to set this up with your printers configuration!
I also want to bring it to your attention that some have been printing this in PLA and having the holes for the cr-touch break! I have printed this in PETG and haven't had such issues!
This allows removal of the heater block without disassembling your whole sprite extruder
I used openscad to locate the heaterblock setscrew hole with a matching backplate, visualize, and to re-render the STL as a whole new mesh.
This is the stl I used before and to locate the hole position.
I included the openscad file for reference(you'd have to change the file paths) of customizing your own stls, as it seems to remesh it completely unlike merging parts in prusaslicer.|
The original part will need to be downloaded and the second half of the file, is not used.
Its there for reference to show how I located the parts.
That would require the part I used as reference aswell.
If you're interested in the extruder visualizer you can get that here!
