1 / 9
Suunto Belt Mounted Compass Holder
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Suunto Belt Mounted Compass Holder - For KB-20/360R G
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 13
- Makes
- 0
- Views
- 140
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial
Suunto Belt Mounted Compass Holder - For KB-20/360R G
Designed a belt mounted holder to hold the compass.
**Update 07/05/23 - New Variant & Test Piece
- Suunto Compass Holder - Original Model - (No locking tabs; smooth channel)
- Suunto Compass Holder Locking - Has Locking Tabs in the channel
- Test Piece - Quick print to see if your printer/slicer settings will fit. Should be a little snug but when held level to compass - should slide freely. The bumps on the compass will touch this test piece so keep that in mind when testing. just slide test piece over the bumps and test the fit for the main body of the compass.
There are small supports designed to be cut off the bottom.
Suggested Print Settings:
- 0.2mm Layer Height
- 0.4mm nozzle
- Default Prusa Slicer PLA settings
- 2 Outer shell minimum
Belt Dimensions (Max)
- 1-9/16" (~39.6mm) Wide
- 7/32" (~5.58mm) Thick
Post a Make and let me know how it works for you.