Ram Mount M6x25mm
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Easy ballpoint for m6 bolt with a 25 mm extension
- Rating
- 5 / 5
- Likes
- 30
- Downloads
- 181
- Makes
- 1
- Views
- 1,051
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution — Noncommercial
Needed a ballpoint mount for my ram mount GPS holder for m6 bolt and a specific height (to get over my dashboard)
The height of the sleeve (until the ballpoint) is 20 mm and the bolt head is another 5 mm up in the ball point.
I made an infill to put in the hole after the bolt, I do this for additional structural strength
I remade it to put a fishing line true it, I just had it solid and drilled a little hole in it to take it out with a loose screw I screw in it
I recommend using ABS or PETG for strength and heat resistance in direct sun.
Likewise, I also recommend using a maximum of 0.15 mm layer height for structural strength.