Ram Mount M6x25mm
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Easy ballpoint for m6 bolt with a 25 mm extension
- Ocena
- 5 / 5
- Polubienia
- 30
- Pobrania
- 181
- Wydruki
- 1
- Wyświetlenia
- 1051
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial
Needed a ballpoint mount for my ram mount GPS holder for m6 bolt and a specific height (to get over my dashboard)
The height of the sleeve (until the ballpoint) is 20 mm and the bolt head is another 5 mm up in the ball point.
I made an infill to put in the hole after the bolt, I do this for additional structural strength
I remade it to put a fishing line true it, I just had it solid and drilled a little hole in it to take it out with a loose screw I screw in it
I recommend using ABS or PETG for strength and heat resistance in direct sun.
Likewise, I also recommend using a maximum of 0.15 mm layer height for structural strength.