Filament Spool Wall Mount/Rack 2.5kg - VAROE
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A simple mount with some needed dowels (22-23mm) for your 2.5 kg filament spools.
- Rating
- 0 / 5
- Likes
- 31
- Downloads
- 166
- Makes
- 0
- Views
- 1,614
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
This model needs to be used with dowels. The holes of the mount are having 23mm diameter and should fit 22mm of (wooden) dowels (like in my case). If there are any troubles i've uploaded the cad model for adjustments.
If there are a lot of wished for a certain measurement i can adapt it aswell :)
I recommend it printing with some more infill and maybe thougher materials. Maybe you have to check on your own. In any case just use more of the mounts inbetween of a dowel.
If it's very close and the dowels are barely not fitting - just use a little sanding paper and sand down the holes.
1kg spool version: https://www.printables.com/model/685087-filament-spool-wall-mountrack-varoe