Raspberry Pi4 case with GPIO for Prusa MK3
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a remix. I added a cutout to access the GPIO-pins.
- Rating
- 5 / 5
- Likes
- 21
- Downloads
- 111
- Makes
- 2
- Views
- 1,346
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
The original one:
https://www.prusaprinters.org/prints/32790-raspberry-pi4-case-for-prusa-mk3
Basically the same version as the original, only with cutouts in the top part for GPIO-access.
- v2 is the basic version
- v3 is the compact version to be used with
https://www.prusaprinters.org/prints/3267-led-light-bar-prusa-i3-mk2mk3 - bottom stays the same
Original description:
Put a Raspberry Pi4B on your Prusa Mk3S and have it align perfectly with the frame.
- Smallest form factor possible for a Pi4.
- Space for an optional Pimoroni Fan Shim.
- All peripheral ports accessible (not the Pi headers).
- Break away window for Pi-cam - version without added.
- Windows for status lights.
- Slim attachment block to frame.
- Uses styling cues from the Einsy Case with chamfered corners and textured sides
- Easy to print: no supports needed.
Edit: added a new version of the top part (picase-top-compact.stl) which is more compact to allow this to fit with https://www.prusaprinters.org/prints/3267-led-light-bar-prusa-i3-mk2mk3
Uses:
- 4 M3x16 for the case
- 2 M3x10 for attaching to printer
A complete redesign inspired by the Prusa Einsy Case and:
Print instructions
0.2mm
20% infill
PETG
No supports4 M3x16 for the case
2 M3x10 for attaching to printer
- Widen the holes on your Raspberry Pi (and fanshim) just a bit for the M3 screws.
- Pierce the sacrificial bridges inside the screwholes on the top shell.
- Put Pi in top shell and place bottom shell on top.
- Screw in 4 M3x16.
- Align on the back of your Prusa MK3 and screw in 2 M3x10.
- Plug in