Weaving shuttle spindle
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Parametric Spool for many uses. I designed this for weaving shuttles It can be used for wire, thread, really anything.
- Rating
- 0 / 5
- Likes
- 14
- Downloads
- 59
- Makes
- 0
- Views
- 331
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Mechanical Parts
- License
- Creative Commons — Attribution — Noncommercial
This is a parametric bobbin used in shuttles for weaving. To match my shuttles, I needed more bobbins of differing lengths.
no supports needed
Print the pins on a raft or with brims. Superglue the halves together.
I have attached my Fusion 360 file. Edit the parameters to adjust the dimensions.
Parameters
ID: inside diameter of the central shaft. adjust this to fit your bobbin winder
od: outside diameter of the central shaft; generally, I use 3.5mm greater od than ID, making a wall thickness of 1.75mm
flange: the diameter of the flange on each end needs to be small enough to fit in the shuttle and not interfere with the spinning of the bobbin
Length: the overall length of the bobbin
setback: the amount the flange is set back from the end of the bobbin. This helps with the free spinning of the bobbin in the shuttle to avoid a little setback, and the flange can rub against the curved end of the well in the shuttle.
Print the pins on a raft or with a brim.