Counting matching models…
edit 02.11.2024: added version with screw holes on the top. For under-desk mounting. edit 24.01.2024: Slots for the rubber feet set further towards the center. Curves instead of corners on the narrow bridges. This wall bracket is mounted…
In Germany its very hard to find 19mm outer diameter pipe. So I decided to make a 20mm version. The holes are 20,5mm diameter. First try with 20mm holes was too tight and difficult to assemble. I recommend to print first the test part to…
Modified the holder a bit that support is only for skadis-hooks necessary.
Modified this holder with a hole for 2.5mm screw. For further instructions please check https://www.printables.com/model/228663-t-nuts-for-ikea-skadis-pegboards
This holder makes it possible to mount the wire spool holder on an Ikea Skadis Pegboard. A M3 threaded rod is needed to mount the side parts to the coil holder. I used a cordless drill as a tool to screw in the threaded rod. Push the side…
Use some VHB-Tape or other strong double sided adhesive tape to place the holder where you need it. Happy printing!
This version has pockets for M4 nuts which greatly simplifies the assembly. Furthermore, the holder is now much more stable. I recommend mirroring the one for the right side in the slicer. Old version…
Print with 0.2mm layer height so that the holes are printed properly. Happy printing!
Hole diameter is 7mm. Paint support under Skadis hook. Thanks @ ari.mandjelikian for initial work. Happy printing!
The holder is modified to hold the "Knipex 86 05 150 Zangenschlüssel 27mm 150mm" The holders spacing is 26mm. For further instructions please check https://www.printables.com/model/228663-t-nuts-for-ikea-skadis-pegboards
I made a new version of @ManelTo Electronic Box cover for the MK4S with NFC Reader. Don't forget to place support under the floating arm. (see screenshot) The holes for the square nuts don't need support material ( Floating holes ).…
Palladin's model is an excellent template for three Skadis hook in a row. Paint support under Skadis hook. 3 Perimeter 4 Top- and bottom layer 10% grid infill Happy printing!
Holder for Jokari wire stripper. Requires skadisnut to mount. For further instructions please check https://www.printables.com/model/228663-t-nuts-for-ikea-skadis-pegboards Happy printing! 05.09.2022: Added files with 2.2mm diameter for…
Space-saving and frust-free holder which allows the pliers to be stored safely and easily on the Skadis board. No wobbly hooks that come loose when removing the pliers. Print with the slot orientated to the printbed. No supports needed!…
Holder for Knipex 1242195 wire stripper. Requires skadisnut to mount. For further instructions please check https://www.printables.com/model/228663-t-nuts-for-ikea-skadis-pegboards Happy printing! 05.09.2022: Added files with 2.2mm…
Paint support under skadis hooks. Happy printing!
Remixed freejstn's 40mm version to fit a 30mm hammer. Thanks @freejstn for the initial design. Happy printing!
Simple holder for a LM2596 buck converter to power a Raspberry Pi. The holder also keeps the stepper cables in place. Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No Resolution: 200 Infill: 38 Filament:…
Modified the case to have option for RPI zero and MMU
Seals the slots in the upper area where the sheet metal parts meet edge to edge. Print settings: - 0.15 Structural - Material TPU. I printed mine with 85a A nice addition to bkerler's screw hole and corner edge plugs.…
This mount is designed as a compatible alternative for the Prusa Accelerometer mount. It integrates seamlessly with the Delta-P fan duct modification. As shown in the pictures, this holder is also suitable for measuring the heatbed. Print…
Added two vertical tubes that stores the supplied spare springs. Thanks @morp for the initial design. Happy printing!
Added cutouts for the bars in the lid. For the right side just mirror the model in your slicer. I recommend to print it upside down. It needs a lot support but the result is worth it. Thanks to @ juh for the initial design. Happy printing!
This holder-plate can mounted instead of the 5V PSU in nimus's Bear PSU enclosure. Material needed: two M3 heat inserts two M3x10 screws Happy printing
I added a fillet to make it easier to grab the parts and increased the size of the top handle to create room for labels. You can download the foot.stp model file from the source model by Sorcerer. Thanks to @sorcerer_6727 for sharing the…
I’m using the sensor in my Prusa XL enclosure. It’s controlled via the ESP32 camera . I soldered the wires on the camera side and routed them through the lower ventilation slots of Michael Fanta’s ESP camera case . Inside the sensor…
This model is designed to be printed in TPU. It is designed for a cable with an outer diameter of 6mm. The lower part that is screwed to the wall should be manipulated with a perimeter modifier until it is printed as solid part. In the…
The Z-Motor mounts are taller and encloses more of the Z-rod. I also recommend to place a 2mm rubber pad between stepper and mount. I also added two extra screw holes but to stay only on the two top ones is also fine. Those rubber sheets…
Hi, I upgraded my favorite Einsy Case with a backdoor to use Prusalink with my Prusa Bear. I also enlarged the hole for the heatbed cable to 10mm inner diameter. The cable clamp I have given a little more leeway because this was in my…
Print sheet wall mount for up to five sheets. I printed this mount on the Prusa XL because it’s my only setup capable of multi-color printing. However, the holder itself also fits diagonally on the Core One L print sheet. Happy printing!
Caps to close or cover the perforation holes on the backsheet. One has a cutout for the magnetic PSU holder. For mounting use the longer rivets from @BuildX.…
edit 08.11.2024: Added a case version compatible with both old and new PCB versions. The old version, which is only compatible with the old PCB version, was moved to the folder named 'old.' added 3mf for multicolor printing. deprecated:…
This model is inspired by @Matt_59327. Since I didn't want to order extra adhesive feet, I created a fully printable version. The parts can be glued together with superglue. Since the base plate has threads in the holes, the "screw"…
The inlays have been adjusted to fit the holder I designed for the MK3.5/S. The raised area where the sticker is placed has been recessed at the bottom to provide some space for the connector on the accelerometer pcb. For the upper…
01.06.2023 Get angled cable strain relief here edit: be aware that the angled cable strain relief works only with 10mm Z-Axis Mod . For standard Bear X-Axis you can turn the X-Motor 90 degree counterclockwise to have enough space. Thanks…
Since I installed the Magnetic feeder from @Unreal_75173 I was looking for a way to safely store the original PTFE hose but also to have it within easy reach when switching to the original spool holder. The unused hose can now be easily…
The holder from GreenParrot served as a template. I measured his STL file in Prusa Slicer with the new measure function and redrew it from scratch in Fusion360. The cable routing is angled 15 degrees and I added two cable tie holes. Happy…
The Z-Tops are 2mm higher than the originals. This is enough to pass the Prusa Z-Calibration test. I have 322mm long Z-Rods installed, these fit exactly between these Z-Tops and the motor mounts. If you only have 320mm long rods I would…
The knob has a receptacle for a technic axle that allows to attach any gear, wheel or even bricks.
The slot is about 22mm and makes it more easy to get it mounted with a ball head screwdriver.
This modification reinforces not only the Z-axis against the right aluminum profile but also against the entire frame. A reinforcement limited to a single profile does not prevent it from still rotating within the front and back plates.…
This modification is untested by me. But I got feedback from some testers that the firmware test is passed.
Prevents the energy chain from rearing up. So this always runs parallel to the lower part of the chain. The e version has a clip only on one side because there is no space for it behind the extruder.
Skadis holder for 200mm Steinle “Streichmaß”
Nice and tidy solution to route your cables from inside to outside the enclosure. One outlet is for the original Prusa quick release PSU cable. If you want to crimp your own Quick Release Cable follow this thread for the parts you will…
Simple solution to get a place for the BME280 temperature humidity sensor. You need: Heat insert 3x5x4 Short M3 screw Zip tie
I have installed the Luftdaten hardware in a electronic housing on DIN Rail. The Breakout Board bracket is a modified Version of LDO's Raspberry Pi mount. You can find the original here. Parts: Electronic Box, width: 220mm, height: 130mm…
Did this Backplate quick and dirty in Tinkercad. My USB connector to the ESP is a bit too thick. Therefore, the original backplate did not close properly. Use 4x M3x16 Button Head screws. Happy printing!
Modified this holder to attach the vacuum pump with the extra tips for my filament storage bags. Here to buy the vacuum pump with filament bags <<link>> Thanks @theo for the initial design. Happy printing!
The little clamp piece pushes itself against the cable while tightening the zip tie to secure the cable. edit 09.04.2024: Added a version to mount IDC connectors. This is handy if the display is mounted outside the enclosure. Got mine…
A cable grommet to feed for example a Rj45 cable into the enclosure. The hole diameter is 7mm. With the non hole version the hole can fully closed. Print with TPU. 3 perimeters 4 top, bottom 30% infill Happy printing!
On the MK3s, the X motors are closer to the frame than on the Bear Mod. Therefore, I had to adjust the upper bracket to create enough clearance. @SonicBroom has also created a solution for this but I don't want to deprive you of mine. On…
These brackets prevent the cable harness from snagging on the left corner behind the fan. They also serve as a mounting solution for the C1L. Unlike the C1, the C1L has no threaded inserts in the rear plate. The fans are secured with…
This side shelf is compatible with the Polydryer, Extrutim’s DryBox, and the Sunlu S2. Using the Sunlu S2 requires a DC power cable with a right-angle connector. BOM: 5x M3x5x4 Heat inserts 3x Screw M3x8 2x Screw M3x6 optional for Sunlu…
Changed the filament sensor cover so that an LED behind it shows the status of the sensor. The side walls of the recess are slightly bent to avoid pushing through. There are two versions of the window insert available. The smaller one fit…
I created this screw-top lid because the original lid could only be opened using a screwdriver. The metal tin fits quite snugly into the printed part, but not too tightly. For this reason, there's also a version with holes to make it…
If you want to screw on the socket strip and do not have the appropriate washers for the wood screws at hand. Hole diameter is 5mm edit 16.03.2026 To create some clearance behind the power strip some parts added. - Upper/lower bracket. -…
I remixed the frame to include this https://www.thingiverse.com/thing:4557709 CC26X2R1 Case.It is simply pushed in and sits firmly. Link to the Rack Mount: https://www.thingiverse.com/thing:4125055 Category: Computer
Just like my previous remix for RepRack V1, this V2 remix includes 20mm and 20.5mm versions for standard aluminum pipes available in Europe/Germany. 20.08.26 added endcaps.
After the press plate fell to the floor three times, I came up with the idea of securing it with magnets. Don't forget to add supports in the magnet holes. BOM: 4x round neodym magnets 6x2mm
These are all currently available results.
