Counting matching models…
My wife thought the stormtrooper was pretty cool, and I am no painter. I didn't want to paint the stormtrooper head or the body, and figured since I had a new fancy pants Prusa XL that can do two colors, I would boot up Fusion and see…
I bought a bunch of 5 gallon jugs to fill my inside cistern on my property, but the caps were too hard to get on and off. My hands just don't work like they used to, and trying to twist and pull those caps with the hole in the center for…
This one is a basic ½" male to ¾" female adapter for my cistern. I made this to fit into my bung and then use the little screen filter to keep bugs out. It is now an effective vent that can be switched around to a hose connector if you so…
I started with drilling a hole in the side of my rain barrel to allow drainage, but I needed to put a screen over it to keep the bees out. So instead, I made this bung so I could put a screen fitting in place instead. Since then, I've…
This is part of my cistern stuff… it's a ¾" pipe thread to garden hose adapter. Pretty simple idea, I was using it for my tee for my pump header as well as for the bungs on my cistern. Obviously want to print it 100% infill, and you…
I wanted to give some strength to the legs on my lack enclosure table, so I made these up real quick. Pretty self explanatory.
I wanted something a bit more compact for my cameras at my property. The cat5 goes right through the back of this box in through the wall. There's three screw holes for recessing screw to anchor. I added 8-32 screw fittings to hold the…
My friend had some of these in metal and asked if I could remake in plastic. I did, and tried PLA, FLEX, PC, and PETG. The PC he said worked the best by far. I guess that's no surprise. The design he sent in metal had no reinforcement…
There's a couple of these out there, but none of them really worked for me. Some were too small on the holes, others were to short on the height. My wife really likes green onions (I mean REALLY) so I made some of the others, but she…
My original mounting bracket was for a mac mini with a hub on the bottom of it, so it was a bit bigger than just a mac mini. My friend asked me to make one that fits a standard mac mini, so here it is. I cut the size and removed some of…
So the whole idea here was to, rather than have the gutter just be cut and dump all the time into the rain barrel, instead to give me the option to have the water go one way or the other. I fugred a simple flipper flapper doo dad would be…
I can't stand the dog tags that hang down, and in my area, you're required to have the tag to prove the rabies vaccination. The rattle, make noise, and I actually had a dog darn near hang themselves on a fence from a hanging dog tag years…
So in making my Lack Enclosure, I cut my PTFE tubes too short. I had to get a few couplers and I tied them back to back and placed them in the middle so it would extend and get my tubes down to my lower cabinet. The filament catches a…
I made these up real quick to organize the PTFE tubing on my Lack Enclosure. Very simple snap on clip to keep the tubing organized and straight as it goes from one box on the enclosure to the other.
My rain barrel I paid for (dumb move by the way… got a massive cistern for $30 that was used for soap that works a billion times better) had a ½" NPT connection on the top and bottom. Not sure why they'd do that, since so few of anything…
This is a simple model of a bourbon barrel I made for a project for my brother that he did not end up using. Figured someone might find it cute or interesting. I made the barrel itself out of the wood infused PLA cause I thought I might…
I wanted a way to keep the PTFE tubes off the MMU2 to be organized and not kink as they passed through the acrylic in my Lack Enclosure. I designed this originally with .17" diameter, but it was way too tight, so I increased the diameter…
This is a simple clip for tying your solar wire neatly together. I made these to route the wire down my RV roof where I am putting my solar panels.
I bought a rocker panel dash add on for my RZR and it didn't have a template to cut the plastic/fiberglass out, so I made this. Pretty simple and basic.
Atrtibution where it's deserved… this whole thing and all the other lego toilet paper models came from this: https://www.thingiverse.com/thing:1996077 So my sister loved the Tigger and the Stormtrooper models, and said she wanted a Lego…
So this model actually wasn't something I was going to put up because it was super simple, but I did something I was actually pretty impressed with and figured it would be neat to show others what the printer can do. I wanted to lift the…
This is a super simple reminder that I use to help me remember to change the printer from the PEI to the textured sheet or vice versa. I've been using the steel sheet holders from Whity:…
I made a remake of the storm trooper lego toilet paper roll holder: https://www.printables.com/model/737212-stormtrooper-lego-toilet-paper-holder-remake (see all appropriate attributions therein) for the wife. She didn't want to use it…
Part 2 of my amazingly interesting and satisfying “3D print your gutter” series (refer to my gutter drain screen for part 1)… the wife wanted a rain barrel, so I cut the gutter. Unfortunately, that meant there was no support for the…
I decided to buy two Louisville Sluggers so that if my puppy dogs got in a tangle with something, and I wanted a less lethal option than my normal side carry option, I had one. I wanted to hang the baseball bat right next to the outside…
My friend wanted to put an SLR camera into one of his little manikins that go into his RC planes to make it look like his pilot was taking a picture, so I mocked up this simple SLR camera and printed it in 1/6 and 1/7 scale for him. Very…
We've had a few issues around the house with cars driving through the back fence, people opening the car doors and stealing change, and some knuckleheads shooting guns off on our quiet, normally peaceful little street. As such, I had a…
First and foremost, attribution to the original: https://www.thingiverse.com/thing:1996077 My buddy retired from the Air Force and Air National Guard from flying F16s, and to commemorate his 20 some years of service I made this guy with…
I know, there's lots of these, but I actually had intentions of making use of the hole in the front of the Sunlu dryer first, and then changed my mind. I ended up putting one in the back instead, it worked better with my setup. Printed in…
If you look at my prints, you'll see I set up my lack enclosure for the filament to be on the bottom and the printer on top. I made routing PTFE and the associated routing paths for those, and the Sunlu dehydrators on are on the bottom…
I wanted to use the empty space under my workbench I made to put some drawers in, but I wanted them not to slide out straight… I wanted them to drop down and slide like a display for my drills and other tools, so I made this. Made of PLA,…
I hung all my planes directly to the ceiling (at least the big planes) but I had the little planes and the helicopters sitting on my shapeoko and getting in the way. I wanted to just hang them to the ceiling, but I put a unit heater in…
This isn't really a remix, it's a bracket to hang the snoopy wind vane from Chipen83 on thingiverse: https://www.thingiverse.com/thing:5189130 The website wouldn't let me note it as a remix for whatever reason, so it's not shown that way.…
My brother in law broke his nubby for his cheapo Cabelas knife, and asked if I could make another. I did, and here it is. Version 2 is the one I printed. I forgot to tap the screw hole. Version 3 I tapped it with an M2 bolt, but didn't…
This goes along with the top mount LED bracket I made and the roll cage mounting brackets… I wanted to put the rear lights on the roll cage so I made a bracket to do it. There's two designs… the first one has a 5/16" bolt through the…
I put a 330gal IBC tote (or maybe 275, I can't remember) for water storage at my property. Of course, I did not want it to get stagnant. I put a pump in for moving the water, and then just made a valve setup so when I'm not there, the…
I built a paver patio this summer and wanted to route the water from the gutter underneath, so I bought some drain tile and routed under the blocks before I put the rocks and such in. I then wanted something to sit flush with the patio,…
Just an idea for your sweetheart. Cute little heart thing to hang on the wall. Obviously I'd figure you'd want to change the initials and the date, so the Fusion 360 file is attached. You're not me or my wife, so please modify it. Please.…
This goes along with my upper PTFE filament route. I want to use the filament dryers in the bottom cabinet, so I made a way for the PTFE to pass through the acrylic and stay neat and orderly. I caused the bottom to fan out a bit so I'm…
The basics of this model is a mailbox topper, the ball on top of pyramid thingy you see in the picture. Home Depot's mail box posts have a flat top, and we wanted something a bit more flashy. There's also some supports for under the…
This is an old one that's been sitting around. The cut off tool comes with three discs and no way to store it, so I made a simple little box. It could probably use a latch of some sort but this was an early design. I made it from PLA,…
I have a lot of yellow jackets and some bees on my property… and they love enclosed spaces. I am plugging and unplugging my trailer quite often, and 1+1=2 most of the time. Unfortunately I discovered I'm alergic to bees… apparently not…
Another part of my cistern series of stuff… this is for the rain barrel and rain cistern on my property. I drilled holes in the top of the cistern and used these so I could hang a temperature sensor, and temperature bulb to an aquastat,…
My mom is into ceramics, and made what was originally a clock for a sister in law. She wanted to switch the clock from a clock to a sundial, and asked if I could make a gnomon for it. The intent wasn't for it to specifically work as a…
Dog decided to get into the wife's drawers and pull out her underwear. Thankfully he didn't eat the underwear; he instead wanted to eat the drawer. Apparently he has something for Cedar. So… trip to Home Depot to buy the Safety First…
This is for anyone with this particular model that experienced the same issues I did. The freezer stopped working 3 months after I got it, and warranty repair or replacement was refused. I had no choice but to attempt to fix myself. The…
We are being overrun with wasps so this was one of my ideas for trying to kill off some wasps. I used the Home Depot buckets for paint and cut holes in the side and glue these in place. This allows me to use canned chicken or other things…
I needed a simple clip for the RV to hold up the wiremold for the thermostat I was putting in for the AC. This is it. I did it with PET for a little more temperature tolerance… the RV gets pretty hot in the summer. Either way it worked…
The amount of dust getting pushed around in my RV trailer was getting obnoxious, so I decided to make a filter setup for it. You can really only do this on the XL in my opinion, bad enough I had to break it into 4 sections as it was. I…
I made this to give me the ability to put a winch on a receiver mounting bracket and switch it between the ATVs or tractor at will. The basic idea is to put the in/out switch and the solenoid on the winch so that all you ahve to do is…
I bought the large Baboni doggy door for my boys, and it does NOT hold up to 15mph or higher winds. We've been having -30F windchill last week, with 20mph winds, and my kitchen has been frozen. Not good. I made this up to slide over the…
My wife wanted something to carry her coffee cups in… she brings one for coffee and one for tea. She uses the 20oz Cantig* or the 20oz Yet* cups, and this was designed to fit both. It also will fit her phone in the slot. There are two…
These are all currently available results.
