Counting matching models…
Simple and sturdy business card holder. I'm using a cover paper that protects the business cards from being scratched - find your own decorative paper! Use fuzzy skin to get a nice surface. Do you like it? Please consider to buy me a cup…
A lens hood for your 50mm lens (filter diameter 49mm). No thread - just push on. Use the Fuzzy Skin option in PrusaSlicer if you wish. No support required. Paint the interior matte black. Do you like it? Please consider to buy me a cup…
A simple holder for microscope slides. A fast-to-print rack. Do you like it? Please consider to buy me a cup cup of coffee . Thank you! Print Settings Printer Brand: MK3, Prusa i3 Rafts: Doesn't Matter Supports: No Resolution: 0.2 Infill:…
UPDATE June 2021: PiCa135 lensboard 2.stl is replaced with a new version UPDATE Feb 2021: New thumb wheel: https://www.printables.com/model/168680-pica135-improved-thumb-wheel-film-advance-mechanis Replaces the parts…
Do you like it? Please consider to buy me a cup cup of coffee . That would make my day! UPDATES 2023-05-05 Do you want to replace the cap with a shutter? Then have a look at Thomas1234 shutter:…
This version is based on the previous post: https://www.thingiverse.com/thing:3152983 These clips are more robust and rigid compared to the previous ones. There are three versions: Universal film clip that can be used for 135, 120 and…
Pentax K body cap with/without the old Asahi Optical Co logotype. No need to use support when printing. Regarding the pictures of the body cap, I have used sandpaper to make a more matte surface. NOTE: Harrow Technical UK writes “We do…
Have you ever experienced plastic print-file style film storage pages and how tricky it can be to insert/drag out a negative when there's a humidity in the air? Use this negative puller to pull them out or drag them in. Category: Camera
To protect your darkslide. Print the two files, glue them together with Loctite Super Glue. It's a snug fit and the holder won't fall off. Print Settings Printer Brand: MK3 Printer: Prusa i3 Rafts: Doesn't Matter Supports: No Resolution:…
This is a negative carrier for Fujimoto G70 and V70. Several variants, depending on negative format, are available. The negative carrier can also be used on a light table if you want to digitalise the negatives. NOTE: The files DIYa and…
This is a spare part. It helps you to wind up two 120-films on one Jobo reel. On the picture you see the 3D-printed to the left and the original to the right. Print Settings Printer Brand: MK3 Printer: Prusa i3 Rafts: No Supports: No…
If you have printed https://www.printables.com/model/247783-hasselblad-film-magazine-mount-pinhole-camera-matt then you can print this cone and get a 30mm/0.2mm pinhole, i.e. f150, 90 degree angle pinhole camera. Material PETG, e.g by…
This adapter will allow you to use your 49mm or 52 mm filter on a Hasselblad lens, having a B50 bayonet. In addition, you can still use the original lens hood without interference. Print instructions Category: Camera Print Settings…
Pentax 110 lens rear cap. Tight fight. Print Settings Printer Brand: MK3 Printer: Prusa i3 Rafts: Doesn't Matter Supports: No Resolution: 0.2 Infill: 10% Filament: Clas Ohlsson PETG Black Notes: Snug fit so you may need some force to fit…
This is a non-destructive conversion of a Praktica B mount lens (50/2.4) to M42 screw mount. The converted lens will allow you to focus to infinity. Glue the two parts 1 and 2 together with Loctite Super Glue Precision. There are two…
A push-on lens hood for 55 mm filters. Enjoy. Do you like it? Please consider to buy me a cup cup of coffee . Thank you!
Macro/copy stand is suitable for any kind of macro photography, including the digitization of negatives/positives. Materials needed: 8 screws 40x6 mm (hex head) 1 screw 15x6 mm (hex head) 9 hexnuts for the screws above Optional: Thin…
To attach a angle finder to the polar scope on SkyWatcher Star Adventurer and similar. The Sky Watcher Polar Scope Pentax Spotmatic.stl can be replaced by your own design so it fits your angle finder. This one fits the Pentax angle finder…
A remix of the excellent design by Thomas1234 so it fits the Pentax MX. Please, use PETG for best result. Use sandpaper to make the edges smooth and if you are using the fuzzy skin option, you may consider to use a steel brush in order to…
Print without support. 0.30 mm draft. Optional: Brush surface with fine sandpaper and steel brush. Do you like it? Please consider to buy me a cup cup of coffee .
For taking sharp snaps of what is viewed in the microscope. This little spacer helps you to get a adequate distance to the eyepiece so can a sharp picture. Please view the pictures to get an idea of how it is used. Print Settings Rafts:…
In order to attach a camera to your Meade ETX telescope you need a T-adapter to the telescope and an adapter to your camera. If you are a M4/3 user this will be a cheap alternative to try out your telescope. Clear skies! Print Settings…
Minox 35ML & GL 30mm filter adapter. This adapter replaces my old adapter: https://www.printables.com/model/173716-30-mm-filter_screw-to-push-on-adapter-for-minox-35 IMO, this one has a much better fit and also shows the distance scale.…
Update: Added a case for 4x LR44 batteries and Air Zn, and a waste case (with a recycle logo) Case for 2 LR44 cells, which uses PET soda bottle screw cap made by https://www.thingiverse.com/ondrejp_sk/designs My remix: I just made the…
A push-on filter adapter for 28mm filters, a lens hood, a lens cap that can be used with the filter/lens hood, and a flat lens cap with/without logo. The lens hood is inspired of the original one. If someone has the exact dimensions of…
How to use it? See the Vimeo video: Printer settings as follows: Do some sanding or use a knife to gently remove filament that may scratch the film. I also use a steel brush to make the surface more smooth. Push the two halves together,…
This thing was made with Tinkercad. Edit it online https://tinkercad.com/things/hn8a9pwTwkK Instructions This is a filter holder that will fit Ilford filters. It will replace the red filter on the enlarger and therefore it may be fitted…
Keep the filter on and place this lens cap on to protect it. Suitable for TLR Bayonet 1, Aires reflex, Rolleicord, Rolleiflex and others. Filament: PETG Which one to print? From left to right: Lenscap for Rolleiflex with bay 1 filter on,…
Conversion of a Minox 35 body to a pinhole camera. Please, read the pdf for details. NOTE: The assembly pdf file is found among the stl-files or you may try this direct link . Tools and material needed PETG filament black Loctite Super…
A rack for Drosophila tubes. It will also fit 50 ml Falcon tubes. Print: 1 ea of Drosophila tube rack.stl 2 ea of Drosophila tube rack (1).stl 6 ea of Drosophila tube rack (2).stl Use Loctite Super Glue Precision for the assembly. Print…
My spherical diffuser attachment was broken so I replaced the broken parts with this construct. Print Settings Printer Brand: MK3 Printer: Prusa i3 Rafts: Doesn't Matter Supports: Yes Resolution: 200 Infill: 20 Filament: Prusa PETG black…
I wanted to design something that is fast to print (about 40-50 minutes per part), yet functional and light. Print the two parts and glue together. Print Settings Printer Brand: MK3 Printer: Prusa i3 Rafts: No Supports: No Resolution: 200…
Battery cases for Panasonic Lumix DMW-BLG10E and DMW-BCM13E.
Please have a look at the Vimeo video here . The Escura Hasselback focusing screen spacer & viewfinder holder has a lower height and a tighter fit compared to version 1 . Version 2 is a bit more delicate and should be handled with care.…
These hot shoe covers will protect your Minox of accidently being put in to flash mode. My GL easily get stucked once in a flash mode so this hot shoe cover does the job.
Voigtländer Bessa 1 viewfinder / sportsfinder Material PETG 1 x 2x4mm screw Do you like it? Please consider to buy me a cup cup of coffee .
The film rewind crank for the Pentax MV is quite brittle, it will fall apart sooner or later... ... so I replaced it with a knob, which is glued with the shim. The knob will work nicely to rewind the film but you may use the crank for…
For the Escura Hasselback owner that has a e.g. Hasselblad 500 where you can't use the focusing screen spacer. Glue all the three parts together using Loctite Super Glue Precision. Do you like it? Please consider to buy me a cup cup of…
Based on the inspiration from the site makrofokus.se, a friend of mine asked me to design a diffuser for his Olympus Zuiko ED 60mm F2.8 Macro lens. I designed a separate ring for the bayonet and then a holder and hood that should be glued…
Mirrors and lenses from a Kodak Autographic are fitted into a 3D-printed housing. The cold shoe is designed for Minox but is compatible with many other cameras. The Kodak Autographic waist-level viewfinder is large and works perfectly for…
The Rolleicord V (1955) is a great companion and I use it often, but it lacks a cold shoe that can hold a light meter or a small flash. This became quite evident when the Reveni Labs light meter arrived, so I made one suitable to hold the…
Update May 23: Eppendorf templates added and adjustment of the template for 15 ml tubes. Fast to print and easy to customise. You can either print it or use a lasercutter - I provide both options for you. No glue required. Design your own…
Remix of the Sports Drink Lid Pill Case by Wheehom. I've created cases for: 8x LR44 batteries 1x CR2 battery + 2x LR44 batteries 1x CR123A + 2x LR44 1x 4LR44 + 2x LR44 9x Zinc Air batteries type 13 Waste case (so you can dispose used…
Support Do you like this design? If so, consider buying me a coffee – it would truly make my day! PX21 / TR133R / V21PX / PX-21 / UG-523 Battery Adapter (for Praktica) This is a battery adapter designed to replace the discontinued PX21 /…
A conversion of a Praktica B camera to 24x65mm format. This is not a straight forward kit, see it as a starting point for your own conversion. Print Settings Filament: any kind PETG black Category: Camera First light
The SSP-445 supports the 4x5" format but not the 9x12 cm format. Here's an film holder that make it possible to develop 9x12 cm sheets in a SSP-445. Glue the two parts to each other by using Loctite Super Glue. For the moment, this is…
Print and thread a copper wire through the holes in the bottom. Pay attention to what is + and - of your LR44/SR44 battery. Print Settings Printer Brand: MK3 Printer: Prusa i3 Rafts: No Supports: No Resolution: 200 Infill: 38 Filament:…
Add apple vinegar and a few drops of dish soap to the Falcon tube, add the cap and trap the fruitflies. Do you like it? Please consider to buy me a cup cup of coffee . That would make my day!
This is specially made for the cover glass made by VWR (cat no 631-0120) and will use the same lid. Some coverslip boxes tend to leave an unwanted mess of coverslips, and a lot of glass is wasted. Hence, this replacement. The one with…
The Open Source Universal Ball Joint by DieZopfe is fun to play with. I made some ball heads with Arca-Swiss plates (not published yet) and therefore I cut the nut in two halfes with a larger collar holding them in place. I used that…
This is an improvement of the previous thumb wheel as shown in the post https://www.thingiverse.com/thing:4695011 Glue part PiCa135 film advance.stl (12) with PiCa135 film advance.stl (13). Use support on parts PiCa135 film advance…
This is a bayonet ring for your M39 enlarger lens so you easily can attach it to your Fujimoto G70 (or V70) enlarger. Print Settings Printer Brand: Prusa Printer: i3 MK3 Rafts: Doesn't Matter Supports: Doesn't Matter Resolution: 0.2mm…
Lens hood for Pentax K 135/3.5, print and just push it on. I used the "Fuzzy skin" option in the print settings in PrusaSlicer 2.4.0. Print Settings Printer Brand: MK3 Printer: Prusa i3 Rafts: Doesn't Matter Supports: No Resolution: 0.2…
30 mm filter_screw to push on adapter for Minox 35ML. UPDATE print this adapter instead: https://www.printables.com/model/257554-minox-35ml-gl-30mm-filter-adapter
In PrusaSlicer, perform a cut at 3.8mm and rotate the lower part. Print and glue them together. Category: Camera
A quick focus ring will make your Ricoh 500 ME more convenient to handle, easy to print too. Use film! Print Settings Printer Brand: MK3 Printer: Prusa i3 Rafts: Doesn't Matter Supports: No Resolution: 200 Infill: 20 Filament: Your choice…
I wanted a clip-in filter for my Lumix and perhaps you need one as well? A fast print to make. Please note, the inner diameter of the M43 adapter may vary. This one has a snug fit for a M43-M42 (screwmount) adapter by Dollice. Align the…
In PrusaSlicer, perform a cut at 6.56 mm and rotate lower part. Glue the parts together using Loctite Super Glue. Use a Whithworth screw to attach the plate to your Minox 35.
First, I recommend you to view the video by Yodayoungling (John-Michael Mendizza). The video explains the Hasselback Instax back made by Escura and the challenges you may have with it, but also what can be done about it: The three files…
Buy any Loreo Lens Cap and convert it to a Pentax K cap! I bought a Loreo Lens Cap for Canon, removed the Canon mount and made a Pentax K mount for the lens cap. This Pentax K mount works also on the PC lens cap made by Loreo. Do you like…
This is 9x12 mask for 4x5 dry rack created by Roland Deegest: https://www.thingiverse.com/thing:2423724 . Print Settings Printer Brand: MK3 Printer: Prusa i3 Rafts: Doesn't Matter Supports: No Resolution: 0.2 Infill: 10% Filament: Clas…
Version 2 – Lens Cap for TLR (Bayonet 1) with Mounted Filter With this design you can keep your filter on and simply place the lens cap over it to protect your TLR lens. Compatible with TLR Bayonet 1 (Aires Reflex, Rolleicord, Rolleiflex…
Filter boxes that match your filters! Print Settings Printer Brand: Prusa Printer: i3 MK3 Rafts: No Supports: No Infill: 20% Category: Camera
Modification of a Microsoft Lifecam Cinema Webcam to an 1.25" Astro Camera. For disassembly, visit http://dslrmodifications.com/lifecam/lifecam1.html Just push gently the camera in to the cylinder. Add a foam disc to cover the blue light…
Just a follow up to keep track on all the batteries I have. Handy to have when you travel too. The names of the stl files will explain which batteries they are made for. This is specially made for the cover glass lid made by VWR (cat no…
A Pentax Spotmatic Correction Lens Adapter is hard to find on eBay. The adapters that fit the Pentax MX/ME and later cameras will be too wobbly if you use them on an older camera like Pentax K1000 or screw mount cameras like Spotmatic. I…
The eyepieces of our student microscopes get a rough treatment every now and then. This collar will cover up the damaged parts of the eyepiece. See pictures.
This is a center rod that fits Kindermann and LPL steel reels. Use Loctite Super Glue to fit them together. Please, note that one of the end of the rod is a bit more narrow and should be glued to the ring. Print Settings Printer Brand:…
A lens hood for your lens with filter diameter 43mm. No thread - just push on. Use the Fuzzy Skin option in PrusaSlicer if you wish. No support required. Paint the interior matte black. Do you like it? Please consider to buy me a cup cup…
Just to share an idea. I apoligize for the low resolution photos. I have a steel rod (7mm) that I wanted to use together with my film clips, so I made a holder for it. Fits nicely to one of the water pipes (16mm) in my darkroom. Use a…
We try to dispose of our microscope slides when appropriate. However, safety is important, and the cover slips may cause injuries. Hence, we recommend this cover slip disposal method where you slide the cover slip off the microscope…
A holder made for a mini laser distance meter, e.g. https://www.ebay.co.uk/itm/393164885702?hash=item5b8a740ec6:g:b6kAAOSwaRFgPMSQ Print Settings Printer Brand: MK3 Printer: Prusa i3 Rafts: No Supports: No Resolution: 200 Infill: 20…
Replacement for TEAC Tascam DR-07 Microphone Cage. Print with support everywhere. You may consider to use Fuzzy Skin in PrusaSlicer or polish the print with a steel brush for a more matte look.
A case for the Voigtländer light meter VCII. Two options, with or without protection lid for the light sensor. If you use the fuzzy skin option, you may need to scratch with a knife so the meter slides on easily, as seen in the picture.…
To take advantage of the toy camera lens from the Recesky TLR, but having the opportunity the get a proper exposure, I made this adapter that fits a helicoid extension tube (Pentax K). The lens barrel is locked when used properly. See…
For Ricoh 500ME, in order to lock the aperture in the 5.6 and the auto position. I use my Ricoh for infrared photography, by experience 1/30 second and aperture 5.6 is a good starting point for the Rollei Infrared film (EI 6). However,…
A slip-on lens cap with a flip tab, making it easy to remove from your Fujica GS645S camera. Made for 49mm filters. Print in draft mode and use PETG filament. Do you like it? Please consider to buy me a cup cup of coffee . That would make…
My old Sram Locating Sleeve was worn out so I made a replacement. You need 4x M3 brass insert 4x M3x8mm hex screws PETG-filament Do you like it? Please consider to buy me a cup cup of coffee . That would make my day!
Dry food funnel for preparing food for the fruitflies. Fits falcontubes and normal culture tubes. Use a brim when you print. Do you like it? Please consider to buy me a cup cup of coffee . That would make my day!
These are all currently available results.
