Counting matching models…
This is my entry for the Stamps Contest so make sure to like and download! I wanted to make a cool stamp that is not only easy to print but supper easy to customize. At the moment it can be customized in Fusion 360, Prusa slicer,…
My 3D printer gets lots of dust on it all the time and I wanted a simple and cheap solution for getting the dust off, so I made this super simple, but powerful, air duster to do it. It works great and is super easy to use with the two tip…
Use this ninja throwing knife to expand your ninja weapon collection.
I have been doing some organisation of my work space, such as Gridfinity , and I had an extra Prusa build plate lying around (literally). So I designed this Prusa build plate holder, so that it would not be in the way and getting…
Jude wanted me to make this model so here it is. This flexi banana will make any minion happy (or human!). If you like this model, make sure to follow me and check out all the other ones I have made:…
I wanted the original to hold my knife, but it just looked too innocent. So I remixed it and made it look angry! Can be used to hold knives, pens, or use as a halloween decoration. You will want to print with supports for highest quality.…
This a simple way to test if you mesh bed leveling is working. It can also clear any gunk that is stuck to the bed to get a clean print bed. I recommended speeding the first layer speed in prusaslicer to make the print go a bit faster.…
I have been making flexi toys lately so I thought that I would make a shark because I like them. This one is pretty cool, I added more things such as the, mouth, eyes, and gills. If you like this model, make sure to follow me and check…
I recently purchased the Samsung Galaxy Watch 4 Classic, and I wanted a charger stand, but I couldn't find a model that I liked so I designed my own. This watch charger combines sleekness and functionality into one model. The curves of…
The wheel can make one of the joysticks not move all of the way, so if your game supports it you might want to change the controls. You will need a 608 bearing for the wheel. If you are going to print one I recommend the one by zimo .…
A simple test to se if your bed is level. Fast Print! Printing Settings: Resolution : 0.1 to 0.2 Support: NO Infill : 100% Raft: NO Material / Brand : PLA/Any Filament Designation : Any More designs Sports Whistle Star Earrings center…
I had some silica gel lying around, and I wanted to make a container for it so that I could use it in my filament drier. I was searching for a good one, but they all seemed to have large holes that would only work with larger silica gel.…
I have gotten a lot of dust and filament scraps down into the deep holes of the z axis motor holder on my MK4S and I wanted some way to stop it from happening. I searched around Printables and found quite a few that I liked, but I thought…
Instructions to build Take all your parts First insert the gear into the case Put in the clicker You can put glue in it but it is not required because you might need to replace the clicker eventually Then take the cap and it will snap on…
This spinner is kind of like my old one but not having the poles in it it can spin in any direction. Prints without supports! Printing Settings: Resolution : 0.2 Support: NO Infill : 20% Raft: NO Material: PLA Filament Designation : Black…
ArduinoPrints3D wanted me to design this for him, so I designed it in fusion, and printed it in the most axolotl-y filament I had. If you like this model, make sure to follow me and check out all the other ones I have made:…
I wanted to make this for my dad, but it was really big and I thought it would take up a lot of filament. So I just made it a bit smaller so it won't take up so much. It is still very stable and it hasn't fallen over at all. If you have…
I wanted a good solution for keeping all of my 3D printer tools more organized, instead of them laying all over my desk making a mess. I looked around for one and found one that I liked, but I felt like I wanted it to hold different and…
Star Earrings for women. Prints without supports! Printing Settings: Resolution : 0.1 to 0.2 Support: NO Infill : 100% Raft: NO Material / Brand : PLA/Mika3D Filament Designation : Yellow/Blue More designs Sports Whistle bed test center…
I made the Ocarina Of Time by: Zuza awhile ago and it came with a stand, but I didn't print it right away because I wasn't sure if I would get into playing it. I started playing it quite a bit and thought it was time to print the stand. I…
None of the other signs like this really fit me, so I designed to design my own. It has 3 color changes and is a fast print. Print Settings You will need to add color changes in your slicer. If you would like to scale it up, only scale…
It is recommended to clean off any dust on the x axis rods, but it can be kinda hard to get all the way around the rods with a paper towel efficiently. This tool makes it easy to get an all around clean in a single go over, just put a…
My watch band was breaking so I designed this and printed it and I hope you like it! It is a 20mm watch band. Print without supports! Printing Settings: Resolution : 0.1 to 0.2 Support: NO Infill : 100% Raft: NO Material / Brand :…
Fidget to reduce your boredom. Prints with NO SUPPORTS ! Printing Settings: Resolution : 0.1 to 0.2 Support: NO Infill : 25% Raft: NO Material / Brand : PLA Filament Designation : Blue More designs Nerf Dart Clip bed test Mega S Legs…
Just removed the water mark on the puzzle. Print three in different colors to make it look even cooler! Prints without supports! Printing Settings: Resolution: 0.2 Support: NO Infill: 20% Raft: NO Material: PLA Filament Designation: ANY…
Whistle for sports. This is a 3d printable whistle that prints without supports! Printing Settings: Resolution : 0.1 to 0.2 Support: NO Infill : 100% Raft: NO Material / Brand : PLA/BBlife Filament Designation : Any More designs star…
I wanted a flashlight holder for my NERF gun, but the one I tried printing just didn't work for me. So I remixed it. I have made this so that it does not require any supports to make printing easier. Printing Settings: Resolution : 0.2…
I thought it would be a fun add on for the Prusa Core One to have a magnetic benchy, so I designed one! Has a small amount of filament between the bottom and the magnet for extra magnet strength. This fits 8x3mm magnets, but please post…
A friend wanted me to print him a dice tower, and after he searched for a while he found this. But there were some problems, the model was very corrupted, and the bottom was uneven so you could not even print it. I fixed all those problem…
This is my model for the Benchy Remix Challenge. I would love all the support you could give me, so don't forget to download and like! I have made a few low poly benchies in the past, but I felt like the pattern was so small that it…
I took a teen entrepreneur class where you make your own business. At the end of the class there was a shark tank, and whoever won got $100!!!!!!! So me and my friend were taking the class, and we thought we would make a 3D printing…
This is my attempt in making a spiral fidget toy. After you print it it might be a little sticky but after a few minutes of messing with it it will be working fine. You can print with supports but it isn't very necessary. You can also use…
An easy way to store, and save your money! Ones it's full you can smash it with a hammer! Print it without supports or else they will be stuck inside and you won't be able to get them out. It is a pretty intense bridge so it might not…
I printed the red dot sight that @ThompsonStudios made, but I felt like there were somethings that could be improved. My list of things that weren't quite the way I wanted is: The battery slot was not very good, and I wanted a slide in…
It's everyone's favorite boat, in flexi style! Fidget all day with the fun calibration boat. If you like this model, make sure to follow me and check out all the other ones I have made:…
I always thought that the cable cover that purse made for the Core One L looked nicer than the grommet on the Core One, so when they made the design files, I knew I needed to remix it to work with the Core One. The core one has the spot…
Super cool Grav Charge from the Mandalorian TV show! Modeled to look just like the one in the show. If you need a different magnet size let me know and I will make it for you. Print Settings: If you are putting a magnet in it, make sure…
No one likes it when people put their username on their files so… I took it off! Printing Settings: Resolution : 0.1 to 0.2 Support: NO Infill : 20% Raft: NO Material / Brand : PLA/ELEGOO Filament Designation : Blue More designs Radclo…
This is a simple model to test how well your printer can print balls. I used TPU, but you can use what ever filament you want to test it with. Any settings.
I have been playing guitar for awhile, and a few years ago I printed Zuza's shark fin pick. I noticed that it made the sound of my guitar better, so I have been using it for along time. I wanted to make one myself for a while but I didn't…
I made a bed test for my MK4S, but when I upgraded to the Core One, I needed a new one. This model is pretty much the same as my MK4S bed test, but it is bigger for the Core One's larger print area. It can be used to make sure your bed is…
Since there is no purpose for the little plus on the spool holder, (That I am aware of) I thought designing a little insert would add a nice bit of color. The plus insert is a press fit, so it should slide in easily without coming out. If…
0.1 layer height, 25% infill, 55 mm/s, support: not necessary.
It gets pretty hard getting the earwax out of your earbuds some times and it would be nice if there was a tool for doing it. Well worry no more because here it is! This earbud cleaning tool is super easy to print, and it takes only a few…
I made the original fan for my Mega S a year or so ago and it has worked really well except for one thing. The holes were way too big for the screws, so it was very wobbly. I decided to fix that by making the holes smaller and now it…
Print-in-Place Gear Fidget! I have added files for those with multicolor printers. Prints without supports! Printing Settings: Resolution : 0.2 Support: NO Infill : 20% Raft: NO Material / Brand : PLA/Prusament Filament Designation : Two…
Hola recommended that I make this for them so I hope they like it. If you like this model, make sure to follow me and check out all the other ones I have made: https://www.printables.com/@3Dprintfun/collections/2463467 If you have ideas…
I made a bed test a few years ago, but it didn't work very well and was a little to simple. So I made this new and improved one that works much better. Right now it fits on a 210mm by 210mm bed, but you can scale it up or down to fit your…
This is the kit you will need to purchase for printing this: Fistrock DIY Electric Guitar Kit Beginner Kit It shows 3 holes for the bridge on the Amazon page, but it is four. Story The Prusacaster was always one of my dream 3D printing…
Clip to hold your Nerf gun darts. Prints without supports! Printing Settings: Resolution : 0.1 to 0.2 Support: NO Infill : 25% Raft: NO Material / Brand : PLA/Polymaker Filament Designation : Orange More designs Missiles For F-14 Jet bed…
I made a silica gel container, and I wanted to make a funnel for it so that it is a lot easier to pour in you silica gel. So I whipped this up in Fusion and put it on my printer. It makes it so much easier to pour silica into it. Here is…
This is a fun pendant/ornament I used it for earrings but, you can do what every you want with it. 0.1, PLA, 100% infill, supports NO.
I'm a big fan of Star Wars, and I thought it would be fun to try designing a tie fighter model! There are to connector pieces, one for connecting the booster to the body, and one for connecting the arms. Everything else is either press…
These legs are to help ventilation compared to the shorter original legs. I have carpet and I put it on the flore and I need to put blocks under the legs so the fans will work but it's hard to move around, so I made these! You should use…
This stylish hanger will hold lots of different things, with its wide hook. There are quite a few different files to help with the weight of the object. I have two for command strips one for half of one and another for a full one for more…
This is my entry for the Stamps Contest so make sure to like and download! I wanted to make a cool stamp that is not only easy to print but supper easy to customize. At the moment it can be customized in Fusion 360, Prusa slicer, and…
This simple calibration cube will make it easier to calibrate your printer. Like all calibration cubes this one is 20mm tall, wide, and long. Prints without supports! Printing Settings: Resolution : 0.2 Support: NO Infill : 20% Raft: NO…
I play soccer so I thought I would make this to mess around with. It has a color change so you can make the ball more detailed. Hope you like it! If you like this model, make sure to follow me and check out all the other ones I have made:…
Supper fast print! Printing Settings: Resolution : 0.1 to 0.2 Support: NO Infill : 100% Raft: NO Material / Brand : PLA/Any Filament Designation : Any More designs Missile for Articulated F-14 Jet Fighter bed test center finder
A charming 3D printable model of an Octonaut kelp cake. Perfect for fans of the series, this model features vibrant details and captures the spirit of marine adventure. Great for decoration or play. Printing Settings: Resolution : 0.1 to…
A friend had something like this (two paint brushes taped to some boards), but it wasn't quite what they wanted, so I designed this for them. It is used for making the little indent near the spine on books. To use it just put it on the…
Missile for Articulated F-14 Jet Fighter You can go here for the jet. This is a 3d printable Missile that takes less then 4 min to print! Printing Settings: Resolution : 0.1 to 0.2 Support: NO Infill : 100% Raft: NO Material / Brand :…
Is it a rainy day with nothing to do? We’ll have no fear and print this fun chess board. You can do color swap to make it have different colored squares. Printing Settings: Resolution : 0.1 to 0.2 Support: Yes For chess pices Infill : 25%…
I recently had made the Hex Scarper by Visle, and I wanted a hook for it so that it wouldn't take up so much space in my toolbox. After looking through the remixes, I could not find one for an Anycubic Mega printer. So I designed to make…
My grandpa's dad flew in the B-17 in WW2, so I made this for my grandpa's birthday. Print Settings You will need to add color changes in your slicer. If you would like to scale it up, only scale the x and y values so that the sign stays…
For my Prusacaster build , I wanted to cut the head stock to make it look cooler than the original paddle head stock. So I designed this template so I could make a fender inspired styled head stock. There are two versions, one that has a…
Fish Prints wanted me to design this for him, so here it is. It only takes a few minutes to print and is very easy. If you like this model, make sure to follow me and check out all the other ones I have made:…
I wanted some way to be able to select the right nozzle with a glance, so I designed this label the slips into the box to tell you which nozzle is which. It is a supper easy print that only takes about 5 minutes. I added a Prusa MK4S g…
A friend had a tool like this, but they wanted it longer, so I decided to make it for them. It is 9mm wide and 203mm(8 in.) long. If you have any other sizes you want I can try to make them. I think this tool is for spacing the boards…
This is just another whistle I made in tinkerCAD. You will want to print it with the mouthpiece touching the build plate with supports to only touching build plate so that there are none inside the whistle. Tested and works very well.…
This rabbit toy is meant to give your bunnies a chance to use there natural senses. Smelling, scratching, and chewing! Even though this takes a long time to print, it can take the boredom away from your rabbit for hours. Make sure to…
A while ago I designed an X-Acto knife disposal bin , but I wanted one that would fit in my gridfinity setup in my desk. So I designed this compact container that will protect you, and others, from old X-Acto knife blades. This model fits…
I made a cool keychain of an F-117 plane. It has a filament swap so that you can customize the color however you like. You can scale it down a bit if you want, but make sure it fits your keychain. Printing Settings: Resolution : 0.2…
I made a spray bottle holder for my alcohol that I spray on my build plate to keep it clean, but I also wanted to make a holder for the microfiber cloth that I use to wipe my build plate. I designed this to fit the Microfiber Cloth Holder…
This more complex calibration cube will make it easier to calibrate your printer. It has more areas to see if your printer is calibrated, and a screw in the middle to see how well your printer can print them. Like all calibration cubes…
This gridfinity bin is great for storing a 8mm X-ACTO knife, plus extra blades. The blades fit perfectly and are not too hard to get out, but also not too lose. The knife slides in smoothly, and the holes on the sides make it easy to…
Evileyedude wanted me to design this for him, so here it is. I added a color change so that you can have it look more like an eye. If you like this model, make sure to follow me and check out all the other ones I have made:…
I designed these earrings for my sister for Christmas because she is a fan of the mandalorian. I would recommend printing at the highest detail possible on your printer. The hole for the earring hook is 1mm.
A cute Mario mushroom to level up your collection! Its simple design needs no supports*! Printing Settings: Resolution : 0.1 to 0.2 Support: NO Infill : 100% Raft: NO Material / Brand : PLA/ELEGOO Filament Designation : More designs…
Heart Earrings for women. Prints without supports! Printing Settings: Resolution : 0.1 to 0.2 Support: NO Infill : 100% Raft: NO Material / Brand : PLA/Mika3D Filament Designation : Pink More designs Star Earrings bed test Watch Band
This is a remix from FlyMike's Anycubic i3 Mega runout sensor reverse housing. Thank you for the great housing parts. I modified its size to adjust its switch sensitivity, and adding filament guide to keep its filament position, referred…
I had a friend over who likes pokemon so I made this for him. It has multiple layers so that you can add more color to it. If you like this model, make sure to follow me and check out all the other ones I have made:…
This a 3d printed model to help find the center of things Prints without supports! Printing Settings: Resolution : 0.1 to 0.2 Support: NO Infill : 100% Raft: NO Material / Brand : PLA/Luftzuge Filament Designation : Red Updates Made poles…
This cool sign will make your cool 3D printer cooler! You should print this at 0.1 layer height, PLA, 100% infill, fans on, no supports. I used blue and white PLA for my print but you can do any color you want. Use the strongest glue you…
This model is for this Controller Wheel This is a model where you can print in multicolor but you don't need a MMU or AMS. Here are the steps for printing it: Open the logo in your slicer and slice it like you normally would, and save it…
I have collected quite a lot of v6 nozzles for my Prusa over the past few years, and I wanted to make a handy gridfinity holder for them. It has a slot for a Prusa V6 nozzle adapter, and holes for 48 different nozzles. It is a 2x3…
This Gridfinity bin is for the Extreme Power super glue that you can buy at Hobby Lobby. It is a 1x1 Gridfinity bin and takes a very short time to print. If you like this model, make sure to follow me and check out all the other ones I…
Super easy to print earrings. Use your printer's smallest layer height.
Tree Earrings for women. Prints without supports! Printing Settings: Resolution : 0.1 to 0.2 Support: NO Infill : 100% Raft: NO Material / Brand : PLA/Mika3D Filament Designation : Green More designs Star Earrings Heart Earrings center…
I just printed the larger bed leveling knobs and I wanted to print this too, but when I printed the chassis the knobs banged in to it and they got stuck on the chassis. So I simply made the supports on it a bit smaller so that it can work…
A quick print to help you draw your lightsaber out faster. Supports Yes Brim No Color Silver
Easy to print Star Wars Rebels logo earrings. Use your printer's smallest layer height.
I made another joystick mod for my Radclo drone last year, but I wanted something a bit nicer and a bit more permanent than gluing something on. So I designed this in FreeCAD to be printed with a tpu part and a part made out of PLA. This…
Easy to print Star Wars Jedi logo earrings. Use your printer's smallest layer height.
A safe way to dispose of your EX-Acto knife blades! Fits 8mm blades. There is some inset words, so you can add a color change if you want. Printing Settings Resolution : 0.2 Support: NO Infill : 25% Brim: NO Material: PLA Filament Color :…
This will fit any 20mm glue stick (e.i, a Elmers Glue stick). It is a 1x1 Gridfinity bin and it is very quick and easy to print. If you like this model, make sure to follow me and check out all the other ones I have made:…
Lots of filament dryers recommend keeping a small gap to let out humidity, but also lots of them don't have any way to make a gap. This is a simple solution for that problem. I designed it in FreeCAD, so if anyone wants to customize it I…
I wanted some way to be able to select the right nozzle with a glance, so I designed this label the slips into the box to tell you which nozzle is which. It is a supper easy print that only takes about 2 minutes. I added a Prusa MK4S g…
I made this for my Radclo controller so that I could have more grip on the joystick while flying. This is intended for a Radclo Quadcopter , but look at the size of it at the end of all the pictures. Fast Print! Printing Settings:…
I recently got a soldering kit for Christmas, and I thought the buttons were a little bit boring. So I thought I might as well design my own. I modeled them in FreeCAD and then printed them on my MK4S with a few color swaps here and there…
