Counting matching models…
Inspired by featherboards we can find on the market, I designed my own adapted to my need and the bed size of my MINI+ (180mmx180mm) I designed it using Fusion 360. Model includes T-nuts and knobs for M6 and M8 screws to fix it on the…
I designed and 3D print a dust cover located on the right side of the curricular saw that makes the dust extraction much more effective Starting from another similar project , I designed the same part but adapted to my TS55 REBQ version.…
This system prevents the TS55 saw leaving the guide rail FS when cutting with the sloped blade. Even with a 45 degree angle the saw remains secure on the rail thanks to the 2 stops screwed on the sole of the saw Inspired and adapted from…
Starting from the original model → https://www.printables.com/model/207534-card-sized-knife-fork-toothpick-kit/comments published by Ruben Martins I wanted to add a spoon to the kit I designed it using Fusion 360 and printed it in white…
I was looking for a solution that prevents the suction hose and the cable getting caught on the end of the guide rail when sawing with my Festool TS55 saw. I printed first the excellent model…
Initially used to avoid kickback when using Festool plunge-cut saw like TS55, it can also be used as simple end stop on guide rail FS/2. Can be used also on Makita and compatible rails. Both front and back versions available. Lock on rail…
Starting from the excellent existing model of drilling bounding ring I designed my own using parametric features from Fusion 360 and added nice features like printed diameter size I tested it from 4mm to 12mm drill bits (The range I…
This knob version (Knob v2) includes a M6 nut inserted inside the knob during printing. I added a Pause print (M601 for the Prusa printers) inside .gcode so print will stop to let you insert nut and then restart printing No glue needed…
I was looking for small boxes to put accessories when using my Festool machines to don't have to always open the Systainer to take them Starting from a previous idea to hang my Mirka sander to its Systainer →…
To complete my Mirka DEROS sander and don't have to take it out for small and quick jobs, I designed and 3D printed sanding blocks for the 125mm and 150mm sanding disks I use Design Design from Fusion 360 is quite simple. I started from…
I wanted to made my own sharpening guide getting inspiration form the ones available on the market, several designs I found on internet and the one I built some years ago with pieces of wood and furniture rolls that wasn't so accurate I…
I have a set of Festool clamps I use mainly with FS2 Rail. I wanted to add protections to use them as standard clamps and protect wood surface I designed and 3D printed both pads in Prusament PETG Jet Black with my MINI+. No support…
I was needing a part to connect a vacuum hose to my circular saw to extract wood chips and dust I designed the part in Fusion 360 with a female connector to enter the circular saw exits and an internal screw thread for the vacuum hose I…
Design Starting from the two following models: https://www.printables.com/model/122734-systainer-150mm-sander-holder https://www.printables.com/model/135647-mirka-deros-wallmount-double I designed in Fusion 360 a new handler compatible…
After designing and printing the insert (See https://www.printables.com/model/211394-3d-print-of-an-insert-for-garden-hose-connection ) and the compression nut (See…
I wanted to present and share with you a project I worked on for E-Nable community that aim to make free and low-cost prosthetic upper limb devices for children and adults I 3D printed using Prusament PLA on my Prusa MINI+ and assembled…
This part is used to adjust and secure scale indicator of Dewalt DWE7492 table saw and avoid plastic distortion of original indicator when securing screws Remix from https://www.thingiverse.com/thing:4602164 Part has been redesigned to…
At home, we're making our own tablets for toilet cleaning (environmentally friendly and cheaper). So I designed and 3D printed a basket to put it inside the toilet bowl. Design inspired by another model available here →…
En plus de la serrure (Voir https://www.prusaprinters.org/prints/123226-serrure-pour-porte-de-compteur-edf) une des charnières de la porte de mon compteur EDF était cassée et la porte ne fermait plus. Je me suis donc lancé dans la…
Design Inspired from the nice ReSpool ~ Prusament edition model designed by Jacob Kincheloe I designed my own one with Fusion 360 to use it with larger spools (up to 75mm width) and with a higher support to have more space around the…
When I published the 1st version of the Wood chisel sharpening guide I was already thinking about a way to adjust the guide to chisel width without 3D printing and replacing the removable spacers (in orange in the picture below) Design So…
After printing a box for my inclinometer, I use for my table saw → https://www.printables.com/model/63528-tool-box-parametric/comments/86291 , I decided to 3D print another box to store my micrometer to replace the original wooden box and…
An easy and simple design I started by reproducing the original model on a paper and use it as Canvas in Fusion 360 Then design the spatula using Circles and Splines One Extrusion and a Chamfer after here is the spatula ready to be…
Using the Filament Spool Switcher & Winder from Miklos Kiszely I noticed that when reducing speed the spool was lifting up from the spool holder I printed first the Filament spool winder additional bracket from jchau57 but didn't like the…
I started from the design https://www.printables.com/model/108115-bouton-de-robinet-darret-wc made by Paterne and I added the stops to the bottom part so that the tap closes and opens on 1/4 turn (Blue arrows) Printing instructions…
I was needing a part to connect a vacuum hose to my Mirka DEROS orbital sander to extract dust I designed the part in Fusion 360 with a female connector with internal screw to enter the sander exits and just a simple cone to connect the…
Design Originally I was using a simple cap to protect USB dongle when storing it in its carry case with SpaceMouse. But the dongle was moving inside the carry case and with the risk to loose it Then I discover the cool design →…
Design: I started from the https://www.printables.com/model/190380-print-in-place-boxes designed by Vidar I sized the box using Fusion 360 parameters from the original model and design an insert for the drills bits. With thickness set to…
After designing and printing the insert (See https://www.printables.com/model/211394-3d-print-of-an-insert-for-garden-hose-connection ) I was needing a nut that fit my 16mm diameter hose. I had only for 20mm and it was too loose. For the…
La serrure de mon compteur EDF était cassée et la porte ne fermait plus. Je me suis donc lancé dans la modélisation et l’impression des pièces cassées : le pêne et l’axe d’entrainement du pêne. Le boitier n’était pas abimé Prise de cotés…
I had to replace battery of my Ice-Watch without having special tool nor purchasing it. I saw following design https://www.prusaprinters.org/prints/131876-columbia-ca025-e15-watch-backplate-tool published here and made one adapted to my…
Starting from https://www.prusaprinters.org/prints/146151-key-cap-tag-recognizer and other designs found here, I adapted caps to keys and complete it with same color lock rings. So now keys and locks are easy to match Printed in Prusament…
La serrure de mon compteur GDF était cassée et la porte ne fermait plus. Comme pour le compteur EDF → https://www.prusaprinters.org/prints/123226-serrure-pour-porte-de-compteur-edf j'ai modélisé et imprimé en 3D les pièces cassées : le…
After printing a box for my micrometer → https://www.printables.com/model/624298-tool-box-parametric-remix-and-gridfinity-storage-f , I decided to 3D print another box to store my caliper and its accessories to replace the original wooden…
Description Systainers can deformed and damaged when closing them if the lid is not aligned with the box. Unfortunately, for the Systainer T-Loc series there is not really a system that allow to center the lid when closing. With the guide…
Update 17/05/2025 → Introducing alignment guide V2 (MK2) I just created a new version of the alignment guide that will be easier to print (Mainly for support removal) and the will be easier to insert and remove from your Systainer the…
You maybe know the famous “ Putting a square Peg in a Round Hole ” from Apolo 13 mission. Here we'll simply try to turn a triangle into square and without any duct tape This dissection puzzle comes from the haberdasher's problem, created…
I designed this box to enclose ESP module and relay board I use to control my pool. It includes holes for cables (Pump, robot and temperature sensors) and mini USB connector for ESP power supply Box includes as well nuts to close and…
As requested by a maker, I posted here the remix of the Edge Softening Sander from stzoran1 that I adapted to different edge sizes 1mm 2mm 3mm The plate (Bloquage) remains the same for all the sizes. Just the Tool (Calle) is different. So…
The part has Ikea reference #122998 and you need 4 I know we can find them in any Ikea, But the nearest shop was too far and wanted to use my trusty Prusa MINI+ and reassemble the bed quickly I didn't reproduce the exact shape of the part…
The grip handle of my telescopic pool pole was damaged. I wanted to replace it by a one printed in TPU. It was a good project to continue testing TPU on my printer and check how TPU is outdoor resistant (Temperature, humidity and UV) I…
I had to replace broken cones for juicer that I can't find anymore on the market (too old). As I didn't wanted to throw them in the trash, I design them using Fusion360 from original model getting inspiration from this video → Printed in…
Here we'll see how 3D printing can be used to repair a cabrio rooftop for few Euro cents On my Volvo C70 convertible, the roof sky is bent and unfolded by a complex system of strings that are hung at specific locations on the roof sky via…
Inspired from different published designs there: https://www.prusaprinters.org/prints/65328-ladder-antislip-shoe https://www.prusaprinters.org/prints/77106-rubber-boot-for-frz-ladder-leiterfuss-fur-frz-leit…
Design My Spool (Re) Winder - Prusament Revised Edition → https://www.printables.com/model/244914-spool-re-winder-prusament-revised-edition was originally designed to be used with Prusament spool using a special interface As I wanted to…
Designed using Fusion 360 from the original clip. I then printed a prototype that fits and works perfectly from the first time. It's now installed on the wheel-way trim of my Hyundai Kona I printed it in PETG using standard PrusaSlicer…
I found this nice model here in Printables https://www.printables.com/model/886832-subaru-wheel-lock-storage-box from zymurgtechnician and adapted it to my need Locks and key from my Kona seems to be a bit bigger than the Subaru ones. So…
Starting from the excellent design published here → https://www.prusaprinters.org/prints/63996-serre-joint-dormant , I designed my own with Fusion 360 adapted to wood size 30mm x 20mm and 8mm threaded shaft After 1st print and test I made…
So I designed and 3D printed one based on the original one I printed it with Fillamentum Flexifill TPU 98A using standard parameter of PrusaSlicer and 0.10mm layer height. As my previous print wasn't so nice (See…
I designed the side stop in Fusion 360 using shape and size of original part Printed one in Recycled PLA for prototype/test. I used 0.20mm layer height, 4 perimeters for extra strength and supports for knob location. I used “Paint-on…
I had to replace the batteries (Yes there are 4 inside) of my Diesel DZ-7313 watch without having special tool nor purchasing it. Everything started year ago with the opener I designed for my Ice-Watch →…
For a project I was needing knob for M5 and M4 screws I designed a simple knurled knob and inserted a nut inside it during printing. To do so I just add a “Pause” inside the GCODE with PrusaSlicer to insert nut and restart printing No…
After replacing battery of my Ice Watch (see https://www.printables.com/model/134206-ice-watch-backcase-opener) I had to change the damaged ring of the watch band I design the ring in Fusion 360 based on the original model and printed it…
Inspired by the model Holder clip for field cutlery designed by Printing Programmer , I designed one compatible with my model Card sized knife-fork-toothpick kit remix with spoon and included also the space for the toothpick Nothing to…
One of the gears in my old Singer 7184 sewing machine broke and didn't wanted to purchase expensive replacement part. I found that model https://www.thingiverse.com/thing:4699608 and 3D printed it after few modifications to ease its…
The handle of a pool skimmer basket is broken. It breaks at the end that fits into the basket. The plastic must be poorly resistant to the aggression of salt-treated water over time. The handle is rigid and it is by distorting the basket…
Initially designed for anti-insect essential oil diffuser ( https://www.printables.com/model/124634-octagonal-boxes-for-anti-insect-essential-oil-diff ), I redesign the model to create several boxes with different sizes and make them…
The holder of the gas tank cap was broken. TPU addict and owning a 3D printer what's more logical to design and 3D print it Design has been done with Fusion based on existing model dimensions Model fits Volvo C70 but sure is also…
Recently I repaired the rubber band of a vacuum cleaner hose holder (see https://www.printables.com/model/238227-vacuum-cleaner-hose-hanger-with-flexible-jaws-for- ) and decided to design and 3D print a new one for a tube with +/-39mm…
5 lids were missing form the set of jars I bought and it's almost impossible to find them at reasonable price Starting from original lids I have, I designed it in Fusion 360 and printed them in Prusament PETG Orange on my MINI+ Result…
I had anti-insect essential oil diffusers in damaged wooden boxes looking like Camembert ones I designed simple octagonal box and lid with Fusion 360 to replace them. Printed on my Prusa MINI+ with Prusament PLA Galaxy Black and Vanilla…
Design My Spool (Re) Winder - Prusament Revised Edition → https://www.printables.com/model/244914-spool-re-winder-prusament-revised-edition was originally designed to be used with Prusament spool using a special interface As I wanted to…
I had to extract bearing from my pool motor pump and there were not enough space to use my bearing extractor. The were just 7mm between the bearing and the rotor. Not enough I discover by chance the model…
Starting form the brillant idea of Yasir Bilgiç in https://www.printables.com/fr/model/297164-nozzle-storage-for-prusa-mini-base and since I didn’t need space to store so many nozzles, I modify it to store also some tools and parts for my…
Design : I design the part in Fusion 360 similar to the original part of my NECCHI Q132A sewing machine. There are 2 things to be considered that are key fort a correct installation and fitting. The bottom part must fit the 6mm square…
I design and 3D printed a simple support for the 2 self adhesive numbers I have. Printed in Prusament PETG Jet Black it's simply fixed on the garden with silicone. After 3 months with rain and sun it's still there and seems to want to…
I printed recently a tube for 608 bearings, I found on Marker World site. And I was frustrated to don't have similar tubes for the other bearing references I owned. So I completely redesigned several tubes to store my 625 and 606 bearings…
Wanted a box to store the foot-pedal of our NECCHI Q132A sewing machine. I found one here https://makerworld.com/en/models/121716-footpedal-box-for-singer-heavy-duty#profileId-130981 but wanted to have one with different size and a door…
Looking there I found this cool design https://www.printables.com/model/352555-water-bladder-dryer from Radek so I adapted my model from it The model I need is smaller and will be used to dry ½ liter flexible flasks or water bottles and…
Cap of my brake fluid bleeder jar was damaged. The top of the cap was cracked and I tried to glue it without success. As I cannot find just the cap on the market, I decided to design and 3D print one Design done using Fusion 360 from…
The detachable drive shaft of my Kenwood multipro FP920 kitchen-aid was lost and part is not anymore available from the market nor manufactured. Part number is KW686921 Ref 2 in the drawing I couldn't find the part in any 3D model library…
Design: I wanted to protect my Fibaro FGS222 module from the dust as it's located inside dry wall. I started from the model Casing for Fibaro dimmer and junction block from Mario M and adapted it to my module and need. The hole for the…
Inspired by similar models that didn't fit my ironing board, I redesign a new clip with Fusion 360 Printed in Prusament PETG Urban Grey with 0.2mm layer height and standard PrusaSlicer parameters Installed, it fits perfectly. So now my…
I designed this simple block to store the bobbins (canettes) of our NECCHI sewing machine. You can store up to 10 bobbins with 20.6mm diameter and 11.6mm width. The design of the block allows bobbins to stay inside without need of a lid…
I wanted to relocated a chandelier just above the table of my dinning room. It wasn't possible to move the electrical wires because of rails inside the ceiling. so I offset the chandelier suspension from the electrical wires For the…
Modeled with Fusion 360, I sliced it with PrusaSlicer and printed it in TPU on my Prusa MINI+. I took the opportunity to play with the number of perimeters and infill to arrive at the "right" flexibility, starting from PrusaSlicer default…
Design I started from the model Bambu Lab X1 Carbon P1P Poop Chute Purge Bucket made by MK HANNON that I adapted to my need This model fully address the need of having a bucket to recover the poops (purge residues), an efficient size not…
Design An equidissection is a partition of a polygon into triangles of equal area. Here I divided a square into 6 triangles of equal area using the following pattern: Target is of course to reassemble the square puzzle but also to find…
This is just a rotated version (15 degrees from the hexagon) of the Hexagon Hook for Prusa Mini Base designed by Yasir Bilgic The original model wasn't exactly in a vertical position when placed on the leg. I just rotated 15 degrees the…
The rubber feet of my old Singer 7184 sewing machine were totally damaged. So I design and 3D printed them with TPU material. The sewing machine needs 5 feet. The feet are located in 2 part of the bottom of the sewing machine. One in…
After realizing models of bearing tubes to store 606, 608 and 625 bearings https://www.printables.com/model/1316811-bearing-tubes-with-id-ring-for-606-608-and-625-bea I've been asked to create corresponding Gridfinity bins. Here there…
I was needing a 53mm hex key to dismount pool robot cleaner wall fitting to connect vacuum cleaner tube instead. I was using an universal pliers with risk of damaging plastic of wall fitting. So I designed a simple hex key in Fusion 360…
The part has Ikea reference #117774 and you need 4 I know we can find them in any Ikea or from internet, But the nearest shop was too far and wanted to use the Prusa MK3S+ 3D printer we have at our Fab Lab. By doing like that we can also…
A friend of mine has a SEB Multi Robot kitchen machine with the security on the lid was broken. No way to glue it and no way to use machine anymore without bypassing the security which is dangerous The kitchen machine is an old model (30…
I wanted to fix the flash lamp on the top of the pillar of the gate and the support delivered was not adapted... so I designed and 3D printed one The original support is made to fix the lamp along the pillar or wall. If you want to it on…
Of course the part is almost impossible to find or at a high price. At first I thought I would do the complete guide in two separated parts because it was too big for my printer. Then I figured why not just make a piece that fits in the…
Design Originally, I was using a simple cap to protect USB dongle when storing it in its carrying case with SpaceMouse. But the dongle was moving inside the carry case and with the risk to lose it. Then I discover the cool design →…
Description I installed the modification to control the air‑assist pump from LightBurn on my Elegoo Phecda 20W laser. This upgrade is well described on the Reddit page…
The socket cover of my central vacuum cleaner system was broken and and no longer closed properly... This generated air leaks in the system I decided to design a new cover and pint it with my MINI+ Design Design from Fusion 360 is quite…
Starting from the Spulenbox Prusament model made by sonof91 I created a simple interface by joining 2 original rings to make it stackable For 2 hubs you'll need 1 interface, for 3 hubs 2, etc… You'll also needs the top and the bottom…
It's time to prepare summer. Doing it last weekend I discovered that one of the wheel of one of my old deckchair was damaged. It wasn't possible to securely repair it using glue and as usual no way to find replacement or a cheap part that…
Rather difficult to find the part or at a high price. I designed in Fusion 360 and 3D printed a prototype 1st with low cost recycled SAKATA 3D PLA with 0.25 layer height and 5% infill Then after model changes in Fusion 360 I printed the…
🔧 Repairing Klickfix Kompakt Rail bike pannier mounts When a bike pannier mount breaks, you quickly discover just how difficult—or even impossible—it is to find a replacement part. Manufacturers sell the complete assembly, never just the…
These are all currently available results.
![Filament Spool Switcher & Winder Additional Bracket TPU no Screw [REMIX]](https://media.printables.com/media/prints/d4e0fe21-e8ff-4dcb-a95b-f2460bb211fe/images/9859792_32c85c26-2fc4-42c5-b4d4-88c76ddf0903_edc52f01-9571-4a31-ba77-b7987b6be9eb/filament-spool-winder-additional-bracket-mk2-jc-8-800x600.jpg)
![Edge Softening Sander [REMIX]](https://media.printables.com/media/prints/992260/images/7556865_921559ee-72b6-4732-845a-be6e2c853006_b0a7fddd-1e94-40c3-90de-dfcf83dd8349/calle-a-poncer-chanfrein-2.jpg)
![Hyundai Kona Wheel Locks or Nuts Storage Box [REMIX]](https://media.printables.com/media/prints/890297/images/6818167_b95ff9f1-ff3f-40d3-8ce2-ee5109c5818a_aec615e0-3ea9-408b-bd29-080ceb598f09/hyundaiwheellockbox-jc-comp.jpg)
![Hook Drive Gear #174488 for Singer 7184 [REMIX]](https://media.printables.com/media/prints/1169334/images/8859486_2ca0c9fc-a7b3-441f-84af-47f86fd53451_3c37ec74-e2ad-4bfa-9974-d322dd2930d8/gear-174488-3d-4-800x600.jpg)
![Bearing Puller / Extractor [REMIX]](https://media.printables.com/media/prints/a756e4d6-2351-4f16-8e97-809b6093deec/images/9509262_1a8f5d91-4b68-4c14-8bff-9267ab2b730a_1db29f2c-1f53-4e05-9938-77caf277135a/extracteur-roulement-surpresseur-v1-2-800x600.jpg)
![Bambu Lab Purge Bucket for X1 Carbon, P1P and P1S series [REMIX]](https://media.printables.com/media/prints/1128677/images/8560155_78cf52b5-5d5d-40e0-9a0e-cf72de8309eb_a6667b58-1ba0-4e2b-8c2f-8bbf0cb13555/purge-bucket-v1-jc-4-800x600.jpg)
