Counting matching models…
I went to iterate on the Belt Tensioners. The ones available do work just fine but i wanted to have them look more integrated into the Neptune. x-Axis: There is a 4 Pro specific version included. y-Axis: There is a Plus & Max specific…
Fits all Neptune 4 variants. This fan-mod targets to provide better cooling then stock while sticking loosly to the stock design language while integrating 2x 5015 Fans and 1x4015 Fan. There is a PDF with assembly instructions. It also…
update(mar 01, 2025): 4Pro has been made compatible by Woodworker - see remixes update(jan 24, 2025): 4pro is currently incompatible with the section ZMount<>Extruder cause it a very different mounting plate - just follow the recommended…
This Calibration Cube follows the footsteps of the voron cube and others. Featuring the same size testing bridging, overhangs, small island/stringing, hidden gems, embossed and debossed text. If added a connector its also stackable. info…
This Gap remover could potentially help retain more heat insight but i can already confirm that it is marginally quieter from the front with this in place. Printing / Assembly prints as single piece if placed diagonal on the bed print in…
This Adapter adds a mount for the BTT Eddy. On the elegoo discord there is a project to support Eddy software wise. For Eddy itself there is no additional hardware required. Adapter mounts with stock probe-screw to the Shround while you…
This is a Remix of the original to add support for the commonly used logitech c270 webcam. For installation Instructions see Remix list - Chirimorin original mount. There is a 4 Pro specific version included. (jul22,2024) removed untested…
Remix of the original with modified shaping
Who is this for It is for those seeking a different style Toolhead design that is still compliant to the stock parts as this allows upgrading just the front, back or middle piece or a various combination of the 3. All 3 parts are lighter…
This is a replacement part for broken Release Lever. It adds as much material as possible without compromising functionality. Its still recommended to unload filament without using the lever. Just by either turning the big gear by hand or…
If you are like me and dont have space in the back to either collect the purge in a bucket or make it reach around to the side or bottom to collect it there then this might be for you. Add capability to purge into a internal bucket that…
Overview This is a 3 Parts upgrade to your S2. All 3 can be done independently. All 3 will improve the performance of the S2 in their own area. I declare it as WIP as further testing showed varying results. Feet Replacement printable…
For this Remix you can follow the Assembly instructions of the Original Design. This set will only replace 1:1 the parts from the original with the ones from here. The Center Carrier of this set provides an additional advantage over the…
If you want to get most out of a chain-system for your N4 this is better overall: https://www.printables.com/model/1145258-neptune-4-series-cable-chain The original from Simin_03 has issues with clamping onto the metal plate. Ive…
This version is rebuild from the ground up to fit the LS Fanmod. This Piece is not only for people who use custom spool positions its also useful for stock Spool setup because it allows the filemant to bend softly into the extruder.…
For whom is this for? Its for Madmans thinking one day the N4 could be an LH-Stinger - it cant - but we try anyways! This Mod is for N4 or 4Pro owners that seek for more power overall on the Y Axis which means higher recommended accel,…
This Adapter adds support for the BIQU MicroProbe v2.0 to Neptune 4 Series Printers and is also compatible with LayerShifted-Fanmod for the N4 Series Printers. May be incompatible with the fanbar! The holes are pre-threaded in the file to…
Important. Print Upside Down from Model Orientation- so that the Front of the wheel is at the top! Print with Supports. Print with “make overhangs printable” as this saves the printe from a very bad rear view. Has both wheels front and…
The effectivness can be slightly enhanced by turning 2 of the 4 feet by 90° when placed under the original rubber feet. That way especially the Y-Axis motion is dampened slightly better. This type of design printed in PETg or PLA is still…
I searched for it but couldnt find any minimalist version that doesnt require drilling or screwing or gluing the case itself. This little adapter wil just slide in(see images) and friction fit there. You can use double-sided tape to aid…
If anyone just needs to replace a broken or lost Bed Level knob for their N4 Series Printer. Or like me need a small knob on the base model. Plus/Max use 4 Large Knobs in the corners and 2 small Knobs in the middle. BOM : 1x…
This adds support for the Beacon to the LayerShifted Fanmod for Neptune 4 series Printers. It is mounted to the back as this is the only place where it doesnt interfere with nozzle viewing angle. Klipper changes [probe] x_offset: 00.00…
For whom is this for? N4 or 4Pro owner that either wish to use 3rd Party Motors - those have longer shafts which does collide with limit switch. Or those who want to add Doubleshear with either stock motor or 3rd Party Motor. What to…
Mini Shroud itself is attached to the Extruder Motor Screw. Its recommended but not necassery to replace extruder screws with M3x14mm ones to get more thread engagement. For Stock Extruder Assembly The Outside screws holding the stock…
In case of a blob or other incidents where the cowling might get damaged or destroyed with these prints here you can have a spare at hand. All 4 individual pieces are interchangeable with the stock parts. So you can use them individual or…
Only compatible with USB Fly-Adxl345 (and same bolt pattern Devices). Included are two types of mounts: TypeA glues onto the Center Carrier incompatible with 4010 Center Carrier invisible when Housing/Front is installed 2x M3x6mm Bolts…
This adds support for BL-Touch to the LayerShifted Fanmod for Neptune 4 series Printers. It is mounted to a modified version of the Right side 5015 Carrier alongside two helper brackets. Klipper changes [probe] x_offset: 43.69 y_offset:…
This Hula Version is build for Hula Voron Feet, meaning the most basic Hula Feet you can get. Get your Hula printable files an manual here: https://github.com/thrutheframe/HULA_Voron You are required to print the “HULA TPU parts STL” and…
This mod and the associated printfiles will give a quick explaination on how and why to install Stepper Dampers to Neptune 4 Series Printers. Included Printfiles are to offset the y Limit switch on Neptune 4 and 4pro - otherwise the bed…
Replacemen for the stock Front Bumper - mainly to replace broken or used part. Slightly longer Front extension then stock for a little extra impact savety. Recommendations: print orientation as shown in Images support are builtin. 0.08…
This Hula adapter is build for Hula Voron Feet, meaning the most basic Hula Feet you can get. Get your Hula printable files here: https://github.com/thrutheframe/HULA_Voron You are required to print the “HULA TPU parts STL” and “HULA…
Ive designed this replacement Wing cause our original one broke and there is no standalone replacement wing available. Recommendations: Print as shown in the screenshots If both stl's are dragged together into a new 3mf project you can…
This bracket is compatible with LS Fanmod in all varaints. Its using a standart 5mm LED bulb as a replacement for the stock led pcb. a single 5mm LED is bright enough to light everything around the nozzle. What you need (BOM) 24V 5mm…
This replaces the stock mountingplate because that is ment for screwing to the wall. the retainingtaps are to strong for double sided tape. This wallmount is optimised to just friction fit the thermostat in place.
In stock form the Argon Poly+ for the Pi5 comes with a very restrictive Lid. Its allowing air in but no air out. If the stock pi5 cooler is used the cooler is basically cycling its own air. To fix that i created this mod. For those who…
The Model is build to get used with 6mm Outer Diameter Cable and small light Bulbs. I can just speak for germany - there are premade Cables with lightbulb socket at the end which take e14 Bulbs. I only tested it with a 25mm outer Diameter…
Original Printable BOM and instructions apply Motor screws 1x M3x8mm replaces 1x M3x5mm The 3x M3x40 are used. Part B was modified to recess them deeper in the Part Requirements Motor cannot be longer then 48mm shaft needs to have a…
Disclaimer untested Mod. Dont have the carriage myself. Cant build it to check if this is even worth it. There is no install instructions or anything also because of that fact. Since i dont know when or if i will upgrade to it i release…
This is a near invisible Wallmount for double sided Tape for the hmIP wifi Accesspoint. Its slid in from the top. The groove is securing it from falling out the front.
These are all currently available results.
