Counting matching models…
I love this model, however it didn't fit my toilet rolls with 37mm inner diameter so I added a version where the cylinders have been replaced. The new cylinders are backward compatible with the parts from the original model. The original…
When I didn't find hooks in sizes I needed I created a set of hooks in the following sizes: 20, 25, 30, 35, 40, 45, 50, 55, 60, 65, 70, 75, 80, 85, 90, 95 and 100mm. The hooks are click hooks. Recommended print settings (same as…
Multiboard bottle holders with open bottom in sizes from 25mm to 120mm. The bottle holders uses the flexible MultiConnect connector. Just attach MultiConnect connectors to your board and then mount the bottle holder on these connection…
Simple / minimal multiboard tool holders in various sizes. Width 10 - 75 mm Depth 10 - 25 mm Use the parametric Autodesk Fusion fusion model for other sizes. Requires one of the Multiboard Snaps to click into. Recommended print settings…
IKEA Skådis bottle holders in sizes from 15mm to 120mm. The bottle holders uses the flexible and strong Skadis generic connector . Just attach a Skadis generic connector to your Skådis board and then mount the bottle holder on the…
A generic connector (hook) to hang bottle holders, bins/shelves or anything else on your IKEA Skådis / Skadis peg board. The strength is improved by including internal reinforcements in the model and by printing the connector laying flat…
An ethernet RJ45 repair clip with a working snap lock that locks the plug in the socket. Prints without supports added from the slicer thus it prints quicker and and uses less material. NOTE: Needs to be printed with 3 perimeters (3…
I love the can dispenser by @Enigma , but it did not fit my refrigerator. So I created a parametric Fusion 360 model, that could be scaled to different lengths. When using the parametric model, be careful, and change the length in baby,…
To support the strawberry plant and keep the strawberries of the ground. The support grid is cut in middle to be able to install the parts around the plant, the grid parts are snapped together using the tiny snap locks. The is also a…
Multiboard bottle holders in sizes from 20mm to 150mm. The flask / bottle holders uses the Multipoint connectors. Use one of the many connector types to mount the bottle holders to the Multiboard . The bottle holders has the same OXO rail…
Gridfinity battery bins for CR2032-batteries. The bins can be stacked. Included bins: A 1x1x4 bin that fits 8 batteries. A 1x2x4 bin that fits 16 batteries. The base box is generated with the Fusion 360 GridfinityGenerator,…
An ethernet RJ45 repair clip with a snap lock that locks the plug in the socket. This model is optimized for sideways print so that the snap lock prints with the layer lines to increase the strength. Use: 3 perimeters (walls) supports To…
The drybox is made from an IKEA 365+ 10.6 l food storage container , with a spool holder for spools up to 2 kg. Optional holders for the following humidity sensors are included: The humidity/temperature sensor used in the Prusa enclosures…
Multiboard connector for items with mounting points for regular screws. Can for instance be used to connect Ryobi chargers to Multiboard. Recommended print settings (same as Multiboard defaults): 3 wall perimeters in wall thickness 15%…
Gridfinity battery bins for CR2450-batteries. The bins can be stacked. Included bins: A 1x1x4 bin that fits 5 batteries. A 1x2x4 bin that fits 10 batteries. The base box is generated with the Fusion 360 GridfinityGenerator,…
Service stand for Mammotion Luba (1-3) robotic lawn mowers. Developed and tested with Mammotion Luba 2 AWD 5000. The stands are threaded to make it possible to change their height for some newer models such as the Luba 3. Recommended…
Stackable Gridfinity battery bins. A 1x1x5 bin that fits 9 batteries laying down, this bin is directly stackable. A 1x1x3 bin that fits 8 batteries standing up, in order to be stacked it requires a 1x1x3 spacer A 1x1x3 spacer. NOTE: The…
Description A customizable nametag/badge with a safety pin holder . Print considerations The name tag for the paper insert (the largest part) needs to be printed with supports from the build plate only. None of the other parts needs…
A mount for the Unifi Switch 8 (US-8 and US-8-60W). The size of the switches this mount is designed for is: 150x100x30mm.
Stackable Gridfinity bins, one 1x2x5 for storing 10 * LR14250 batteries, one 1x1x2 for storing 16 LR41 and one 1x1x2 for storing 10 LR44. The base box is generated with the Fusion 360 GridfinityGenerator,…
Gridifinity bind for CD or DVDs. The bins can be stacked. Included bins: Bin for 1 CD/DVD - size 3x3x1 (126x126x7 mm) Bin for 6 CDs/DVDs - size 3x3x2 (126x126x14 mm) Bin for 12 CDs/DVDs - size 3x3x3 (126x126x21 mm) Bin for 18 CDs/DVDs -…
Gridfinity battery bins for D-/R20-batteries. The bins can be stacked by using the included spacers. A 1x2x4 bin that fits 2 batteries. A 2x2x4 bin that fits 4 batteries. A 1x2x6 spacer that is needed to stack the 2-battery bins. A 2x2x6…
Gridfinity battery bin for C-/R14-batteries. The bin can be stacked by using the included spacer. A 1x3x4 bin that fits 4 batteries. A 1x3x4 spacer that is needed to stack the battery bins. NOTE: The spacers are best printed upside down…
A compact stackable Gridfinity 2x2x9 with two partitions, each partition fits 20 AA batteries or 6 C batteries. It is not ideal for C batteries as the batteries can be hard get when the partition is full. The base box is generated with…
A Unifi Switch 8 rack mount for a 19" rack. Printed with No supports 3 perimeters / walls Use the “Blende Links.stl” panel from 19" Rack Panel Hexagon Design to get the other half of the mounting panel.
Multiboard cotton swab holders in the following sizes: 100, 150, 175 and 200 mm. The holders uses the flexible MultiConnect connector. Just attach MultiConnect connectors to your board and then mount the cotton pad holder on these…
Measuring cups that can be stacked. The parametric fusion 360 file have the following parameters: volume - the volume in liters (as ml is not supported by Fusion) top_radius - top radius in mm bottom_radius - bottom radius in mm wall -…
A yarn bobbin in shape of a cat, drawn in Thinker Cad and cleaned up in Fusion 360
Made to be a less expensive retractable device alternative for Stealth Press , this is, definitely, not a Key-Bak®, but it sure works like one. Required parts: Part Size / Standard QTY Source M3 bolts M3x8 SHCS 2 Buy here M3 threaded heat…
Strong cat litter scoops designed for bigger cats. There are two scoops, one generic model and one model with bigger slits for wood pellets (Cat's Best smart pellets). Print with: 3 perimeters (walls) Supports (needed for the back of the…
Stackable Gridfinity bins and a template filament sample card. Sample Bins The Gridfinity sample bins are stackable for easy storage in drawers. 1x2x6 bin that fits 10 filament sample cards. 2x2x6 bin that fits 21 filament sample cards.…
A compact stackable Gridfinity 2x2x9 that fits 45st AAA batteries + 4 st 9V batteries to avoid wasting space. The base box is generated with the Fusion 360 GridfinityGenerator,…
I use these holders together with the 15x40mm version of the Multiboard tool holders in various sizes to keep the charger cables organized. Requires one of the Multiboard Snaps to click into. Recommended print settings (same as multiboard…
Gridfinity needle file bin for storing 3 needle files. Designed for the 6 piece needle file set sold by Prusa, but you need to print two bin for storing all 6 files. The base box is generated with the Fusion 360 GridfinityGenerator,…
A holder to mount the Netatmo Rain Gauge to a flat surface, such as a wooden handrail. Use PETG or ASA for UV resistance. No supports needed. Print with 4 walls for better strength.
A holder to keep opened 0.5 g and 3 g super glue tubes in a standing position to prevent then from clogging. Requires one of the Multiboard Snaps to click into. Thanks to Jonathan ( KeepMaking ) for creating multiboard
Stackable Gridfinity battery bin, size 1x2x5, for 9 CR2 batteries, or 10 batteries if you don't care about the ability to be able to stack the bins. The base box is generated with the Fusion 360 GridfinityGenerator,…
A frame with mounting options for rods used at exhibitions, wall mount, IKEA Skådis pegboard and a foot for standing on a table/shelf. Available versions: Photo size Frame size 3 x 5 inch - 76x127mm 96x147mm 4 x 6 inch - 102x152mm…
Gridfinity battery bins for CR2025-batteries. The bins can be stacked. Included bins: A 1x1x4 bin that fits 10 batteries. A 1x2x4 bin that fits 20 batteries. The base box is generated with the Fusion 360 GridfinityGenerator,…
A Gridfinity box (size 2x3x4) for storing the original Prusa Accelerometer , designed for the Prusa CORE ONE 3D printers. The case is printed in two parts, the Gridfinity box and a cable holder snap-on to keep the accelerometer cable in…
A nametag/badge with the name on paper insert. The name tag provides space for a logo. Print considerations The name tag for the paper insert (the largest part) needs to be printed with supports from the build plate only. None of the…
To mount David Ds multiboard adaptation for the Prusa Enclosure on only parts of a side the snap fit STEP file provided by David D was remixed to allow increased adjustability. To be of any use you will need parts from the Multiboard for…
IKEA Skådis cotton swab/pad holders in the following heights 75, 100, 125, 150, 175 & 200 mm. The cotton swab holders uses the flexible and strong Skadis generic connector . Just attach a Skadis generic connector to your Skådis board and…
The holder uses the flexible MultiConnect connector. Just attach two MultiConnect connectors to your board and then mount the holder on these connection points. Recommended print settings (same as Multiboard defaults): 3 wall perimeters…
Cover/case for the Home Assistant ZWA-2 z-wave antenna if you need another color to better fit your home. There are single color versions for different printer sizes and one version if you want to have a multi color antenna. Recommended…
Multiboard mount for the EP1 ( Everything Presence One ) mmwave sensor by Everything Smart Home . The mount works equally well with the Everything Presence Lite. Recommended print settings (same as Multiboard defaults): 3 wall perimeters…
Gridfinity bin for sorting stell balls. The steel balls in different sizes I ordered from Amazon where scrambled when I received them so I created gridfinity bins for sorting the balls into their different dimensions. The base boxes are…
A click in place extension for the Plannja foldable rain water ejector.
Recommended print settings 3 Perimeters / walls 10% Cubic infill Assembly instructions Measure the window height and width in millimeters. Subtract 2 * 14mm for the CornerConnectors and optionally 14mm for a 3 way connector from both the…
I glued the ventilation grid parts together, but that is probably not necessary. The fasteners for the frame uses the predrilled shelf attachment holes in the IKEA cabinet. I've added double 1 cm x 2mm magnets to the fasteners and the…
The old Biacore logo from 1990-2007, i.e. antibody and antigen figurine combined with a Xioami Mi/Mijia Bluetooth Thermometer (43x43x13 mm) holder. The model is printed as 3 parts that have to be glued together. How to print: 0.4 mm…
IKEA Skådis magnifying glass holders for magnifying glass Ø80mm - Ø108mm and a frame thickness of up to 26mm. The holder uses two of the flexible and strong Skadis generic connector . Just attach two Skadis generic connector with to your…
Multiboard holder for the OilStick from Slant3D - https://www.oilstick.shop Recommended print settings: 3 walls / perimeters 15% infill supports from buildplate - model laying on its side 0.2 mm layer height 0.40 mm nozzle PLA Special…
These are all currently available results.
