Counting matching models…
***NOTE **** This Beacon mod is FULLY FINALIZED for Klipper by STEW675 and fan system can be fully integrated with or without beacon. ****MY Config: https://github.com/FxWoody/Qidi-Plus-4-Mods/tree/main/Beacon Support for Beacon probe…
***REVISED*** I had uploaded the wrong front-screw model … added proper one and also a small washer to retain the baril in place with the bearings when changing spools :) Spool support with a cylinder on needle bearings to minimize…
Hey you !!! Are you tired of picking up the scrap pieces of poop left-over stuck in the front gutter of your Qidi Plus 4 ?!?! Download and print this world first release of this amazing engineering concept and make your cleaning day much…
QidiBox drive gear replacement assy Print with PETG-GF or better (heat resistance ***IMPORTANT***) Tolerances are very small in order to make assembly solid on the shaft and bearing. This is a complete assembly, you will need to salvage…
Simple 120mm fan cover grill with snap-in removable Venturi. More Venturi design to come :)
***ATTENTION !!! SOME NEWER MODEL DO NOT HAVE THE 4 HOLES FOR THE PLATE TO BE SCREWED ON …. YOU WILL NEED TO MANUALLY DRILL THEM *** Design these spring adjuster to replace the ones mounted with the PIEZO's on the QP4 bed. In order to use…
Replacement arm for extruder that have grab issues. The cantilever arm can warp after many hours of high heat printing and loose grip and misalign the gears. Print with ABS-CF or higher rating filament
Raiser with full integrated extra cooling system. Print with PETG-CF or higher strength and heat resistant. 0.2 layer 3-Walls 15% Gyroid Printing the frame is a bit tricky since you need to support the interior tube so, i added a…
Made this for my QBox at tangle sensor. Suggest printing: Mat: ABS - PA612-CF or equivalent (NO PLA) Layers: 0.08 ~ 0.12 max full walls and 100% infill or you can try 1 wall-100%infill with ALL SOLID SURFACE ironing SEE VIDEO…
reproduction of the drive gear for the QidiBox
Support for Beacon only Remove Bltouch probe and screw the support in place. Print : Layer:0.16 Walls: 5 Infill: 100% PETG-CF recommend or PA6-CF better Beacon position : x_offset: 0 # update with offset from nozzle on your machine…
***Note*** You can print the fan system parts, and as soon as my fan gets in, i will make an installation video Hi gang :) Made this full cover with the front door to help keep our temperature inside and also to have full access from the…
Snapmaker U1 Full side Dryers system Hi gang :) So here is my crazy invention/addons for a pair of dryers to keep filaments under dry control and to help also cooling down the drivers and PSU as modification to the existing intake ports…
These are all currently available results.
