All models

sink hole cover

For 80 mm diameter sink holes, scale on the slicer for different dimensions

headset hanger

recomended equal or lower 0.20 mm layer height due to the need of printing a thread in laying down orientation

Small Screw Organizer

Small Screw Organizer

soap tray

a soap tray

🝒 Rotating Machine

Hardware you need: 8 M3 X 25 mm bolts and 6 nuts 3 X skate roller bearing (608 size) Friction is low! limited to gears and bearings, also fluids unless you move to space. Connector dimensions provided so please design more tools! FAN TOOL…

Jet Engine (manual) Fan

An accesory to be used with my rotating machine print . Print on the given orientation, no suports required.

Toothpaste Squeezer

Toothpaste Squeezer

Kitchen Blender

This is a remix of my rotating machine . All tools from that model are compatible with this one. Hardware you need: 10 M3 X 25 mm bolts & nuts 4 X skate roller bearing (608 size) STL are given on the recommended printing orientation, no…

Phone sound amplifier

No supports needed, print given orientation on the STL file

Windmill

need a bar 8 mm outer diameter, minimum 175 mm length. Rotational axis is actually a 30 mm long M5 bolt: Two kind of clamps are provided: square (max 35 mm height) and circular (max 40 mm dia): All the hardware needed: 8 mm outer diameter…

🟒 headset hanger 🟒

recomended equal or lower 0.20 mm layer height due to the need of printing a thread in laying down orientation

vase

link to the bigger vase

🜢 Hexagon Jar 🜛

Sizes available for download: Inner D iameter [mm] H eight [mm] 60 40 60 80 80 60 80 100 120 100 60 80 100 120 140 120 60 80 100 120

starfish

modelled in blender

⟲ Dremel Turbine ⟲

remix of the Landru dremel turbine , but added a bearing, end exhaust and adapted for this driller model

🝰 Salt & Pepper Shakers 🝰

Salt & Pepper Shakers

Prusa Mini+ ESP32 Camera mount

All the assembly is press fit. Print on given orientation, no need of supports. I recommend to use additional perimeters (e.g. 4) on the clamp piece, to increase stiffnes. PETG material recommended use, but not essential. 160 FOV CAM: 65…

Fruit picker

Hardware required: Broom or painter stick with threaded end 5 x bolts M5 minimum 15 mm length 5 x bolts M5 minimum 20 mm length 5 X Rubber bands String for pulling mechanism For fingers only tried PETG and works fine. Print on the given…

transparent lamp

outer part shall be printed on vase mode with no bottom layers. Hardware needed is a E14 lampholder which must be of the threaded type, something like this:

Anemometer

needed : 2 X M3 20 mm Socket Head Cap Screw Bolts, with nuts 1 X 6700RS bearing [10 x 15 x 4 mm]

🙞 Hanger 🙜

Just for the fun I calculated, by Finite Element Method, the maximum weight the hanger could take if printed with 100% infill and using Prusament PETG. I have used the Prusa Technical Data sheet which indicates a Tensile Yield Strength…

ESP32 camera case

Remix from Michal Fanta ESP32 camera case with a mechanical support for a WIFI antenna. It uses a M3 bolt to secure the antenna. On the photos is mounted on this Articulated arm made for the Original Prusa Enclosure.

Prusa Enclosure ESP32 Camera Support

update: base file version 1.1 to make compatible with USB-C plugs sizes Support for ESP32 cam to the prusa enclosure corner. Considering the 65º FOV of the ESP32 stock camera it will cover the entire printing surface and a bit more: It…

vise

Print on the given stl orientation, no supports needed, fits tables up to 30 mm thick. PETG strongly recommended. Tip for extra strength and durability : increase number of perimeter and/or infill of the long bolt, the only piece under…

SCALEXTRIC GRADES

3D models given on the printing orientation, no supports are needed. Humans I printed with 0.1 mm layer height, full infill.

bowl

modular lamp

Hardware needed: E14 lamp holder and plug cord OR E27 lamp holder and plug cord 7 bolts M4 min 5 mm length 7 threaded brass inserts M4 dimension Assembly:

Wine bottle holder

No need of supports, print on the given orientation. Fits your Prusa Mini workhorse. Photos samples printed on PLA with 0.3 mm layer height and 10% infill.

∾ Shelving system ∾

If there is any non-listed custom thickness that you would like just put a comment and I can upload. As a bonus, the dimensions and bill of material for a shoe organizer: support T 12 prints support X 6 prints support L 8 prints Wood (in…

gripper

Recommend using PETG, at least for fingers and trigger, rest probably will be fine with PLA. Needs a couple of M3 bolts minimum 25 mm long, for the finger hinges. The plastic spring works just fine, the elastic bands provides faster…

Heat Insert Press Thicker Springs

After I broke the original ones, I designed thicker springs for this Heat Insert Press . It needs M3 X 15 mm minimum lenght bolts. I printed them on PETG with many perimeters.

vise

Check the improved version 2 print on the given stl orientation, no supports needed, fits tables up to 30 mm thick. PETG strongly recommended. Tip for extra strength and durability: increase number of perimeter and/or infill of the long…

Wendelstein 7-X

edit : the mockup is now sitting at Wendelstein 7-X control room! Wendelstein 7-X is the world’s largest fusion device of the stellarator type. Built at the Max Planck Institute for Plasma Physics branch located at Greifswald, Germany.…

windmill blades - vase mode

Variation of the blades that can be printed on vase mode, for this windmill .

Weather Vane

Needed: 1 X 6700RS bearing [10 x 15 x 4 mm] 2 X M3 countersunk bolts with nuts

screwdriver bit handle

If the bit does not fit smoothly try to pre-heat the tip of the handle with a heatgun or an hair dryer, before inserting the bit . Then leave the part to cool down with the bit inserted. That will make the perfect size to match. Better…

🜟 dremel drill press

hardware needed: two rods 8 mm external diameter and 170 mm long 4 bearings 608 size 1 spring 50 mm length & 12 mm external diameter 6 M5 bolts 20 mm long and 2 M5 nuts. There is an STEP assembly that helps for hardware dimensions.…

skate bearing anemometer

Hardware you need: 5 M5 X 30 mm bolts 1X skate roller bearing (608 size) Anemometer cups: glued to the rotor arms. Better to be printed upside down using supports. Remove the skirt and all pieces can be printed in one shot on the prusa…

Prusa Enclosure Camera Arm

Compatible with the ESP32 camera case from @MichalFanta ; For design I used this model of the enclosure from @GiantBrain, thanks!! Hardware you need: a couple of M3 bolts w/ nuts to secure the support to the enclosure M4 or M5 bolts to…

clamp

Print on the given stl orientation, no supports needed, PETG strongly recommended. Fits object up to 60 mm. Tip for extra strength and durability : increase number of perimeter and/or infill percentage.

Moka Watering Can

print on the given 3d model orientation, no need of adding supports. For enhanced watertightness use 4 perimeters and PETG if possible.

clock

Hardware: 4 x M3 bolts max 15 mm length Clock mechanism dimensions ~ 55 mm X 55 mm X 15 mm print on the given orientation, no supports needed!

🞀 Kitchen Scale Spoon 🞂

Kitchen Scale Spoons, 50 and 100 ml calibrated volume

Polaroid / Instax Case

phone amplifier with helmholtz resonator

https://en.wikipedia.org/wiki/Helmholtz_resonance

Caliper holder

2 versions: with or without magnets. STEP files provided.

nextruder nozzle tray

the nozzle case shown on the pictures are these ones: Nextruder Nozzle Case from @LittleMike_488

headset hanger

recomended equal or lower 0.20 mm layer height due to the thread

🙪 IKEA lack Tray 🙪

Fits a prusa mini

weather station = anemometer + wing vane

Hardware you need: 22 M5 X 20 mm bolts 2 Skate roller bearing (608 size) 2 bars 15 mm diameter. Minimum length 300 mm. Support is designed for a 35 mm diameter pole. Anemometer cups: glued to the rotor arms. Better to be printed upside…

ESP32 camera table support

support for the ESP32 camera, to be used with the esp32-camera-case made by @MichalFanta. It needs one M5 X 20 mm bolt and nut. Also compatible with this case w/ wifi antenna:

🞚 Coffee Jar 🞚

next time the guests ask where is the coffee you could tell them to use the imagination and look for it by themselves!

Roland V-Drum Headphone Hanger

Needs a M5 X 20 mm minimum lenght bolt with a nut

Roland V-Drum Mobile Phone Support

needs a couple of M5 X 15 mm with nuts

Malaga Mountains

model created using https://map2stl.com/

IKEA Fado lamp hack

To be printed in vase mode, better with a 0.6 mm nozzle for perfect fit: 0.4 mm may provoke a bit of a lose fit, 0.8 mm may an interference. Designed for the IKEA FADO lamp holder, this piece on yellow: Setting for printing is vase mode…

Pistachio Bowl

Pistachio bowl

Big Box fits Elegoo CC

It fits Elegoo CC and needs 6 x bolts M3 x 35 mm

☽ lamp ☼

Hardware needed: E14 lamp holder and plug cord 8 bolts M4 min 5 mm length 8 threaded brass inserts M4 dimension For the shade, I printed fine with only one perimeter and 0% infill to promote that light goes through, but also to avoid…

Squared double vase

to be printed in vase mode

Gripper

It needs 3X M3 bolts minimum 30 mm length

prusa connect webcam support

for using mobiles as webcam via prusa connect. For mobiles of maximum dimensions of 12 mm thick and 77 mm wide, if not scaled.

Alhaurin El Grande Terrain Map

created with TouchTerrain ; print on the given orientation, with some brim. My print is 0.15 mm layer height.

Prusa Enclosure Toolbox

Two versions available depending if using brass inserts or the M3 bolts are threaded directly into the plastic.

wall clock

Free variant of the Düdel Clock , but for the wall. Hardware: 4 x M3 bolts max 18 mm length 4 x M3 bolts max 20 mm length Clock mechanism dimensions approximately ~ 55 mm X 55 mm X 15 mm Step 1: install the clock mechanisn into the pocket…

Barcelona Eixample

I created the model using Blender and following this great tutorial video

🅣🅔🅛🅔🅢🅒🅞🅟🅔 tripod weight

Designed for bresser tripods but would fit any similar model. Any gym weight disc with an inner diameter > 28 mm but < 35 mm would fit. Minimum stack height 25 mm since the thread does not go all along the shaft. Maximum discs stack…

🅣🅔🅛🅔🅢🅒🅞🅟🅔 handlebar

Printed in PETG 100% infill for increased toughness.

Prusament Spool Turntable

convert the prusament spool half on a turntable for your 3dscans or more ! Print on the given orientation by the stl files, no need of supports. There are no bearings, just surface contact, may add a bit of oil for a smoother rotation.

ESP32 Camera Support for Prusa Enclosure - Filament Monitoring

Needs a couple of M3 bolts and nuts to attach it to the existing holes on the prusa enclosure. Print on the given orientation, no supports are required.

dodecahedron

Instructions: Print 20 joint parts Laser cut two acrylic A3 sheets (297X420mm) 3 mm thick (use the DXF files) Bolt 60 countersunk M3 X10 mm bolts with 60 M3 nuts 2mm height.

niu mini keyboard phone tray

Iberian Peninsula Terrain Map

created with TouchTerrain ; print on the given orientation, with some brim. My print is 0.15 mm layer height.

▲▲▲L Δ Μ Ρ ▲▲▲

E14 lamp holder and plug cord 8 bolts M4 min 5 mm length 8 threaded brass inserts M4 dimension

casio watch bike mount

Needs two M4 X 15 mm bolts and inserts. Fits an oval bar 37 X 33 mm. The two pieces are to be glued together.

Kitchen Sponge Drainer

A kitchen sponge drainer, needs two suction cups to be attached to a wall. Two front hooks for drying a kitchen cloth.

watertight flowerpot

Print the external vase on spiral mode. For the internal piece use these settings to make it watertight : 5 perimeters 5 bottom layers 5 top layers Iron the bottom hole 100% infill 1.1 extruder multiplier 30 mm/sec speed nozzle…

Office Indicator

Laptop Stand

Print on the orientation of the STL file with no need of supports.