Counting matching models…
I designed this portafilter funnel, because I didn’t find any that looked nice, cleared my mill and had magnets instead of using the lugs of the portafilter. So I made this nice funnel. You’ll need 6mm diameter magnets with 3mm thickness…
Print approx. €1.96–€2.40 excl. taxPreliminary estimate for one variant
I wanted an airtight PC4 feedthrough for my drybox, so i took some insperation from the RoboMagus solution and iterated to this solution. The cap is capable of sealing the whole feedthrough airtight, when it is not in use. I also added a…
works with small BIC Lighters. Printed it with Prusament PLA with organic supports turned on.
Hello everyone, there are several nice models for lego technic inspired clocks based on the old 24 teeth x187 gear. I found these: https://cults3d.com/de/modell-3d/haus/horloge-clock-lego-technic-gear-engrenage…
UPDATE: I bought an Dyson V12 and discovered that they changed the interface. I made a version that fits the newer accessories with the wedged interface, too. The mounts are angled, so all varios Dyson Accessories can be mounted without…
Nice AirTag holder that fits next to the fidlock bottle cage mount. Very small profile and no unnecessary raise of the bottle cage, like so many other ugly solutions out there. Moreover the radio reception of the AirTag isn't that bad…
Nice little valve cap for all the early bird riders out there. The eye of the bird is a piece of filament that is pressed in and cut off flush. Works with sclaverand/presta valves.
I made this insert by scanning the inside of the Systainer. It organizes all the different 150mm sanding papers you might have. There's also some space on the right for some 125mm papers. I printed the Insert from Polymaker PolyLite PETG…
Just a nice Gridfinity holder for the BOSCH 12V battery
The mesh of my AirPods Max barely retains any tension to sufficiently support the headphones on my head. Then I found the solution by Ed with this cushion insert, that actually looks good. As the size of the AirPods Max gets reduced as…
I remodeled the base in fusion to accommodate 5x3 magnets. It’s modeled around a 50% reduced sign. Resize as needed
I wasn't happy with the solutions out there. Got some Inspiration from the “Ultimate Printer Knob”, which was just to big for my setup and wasn't sitting right on the prusa mini . Therefore I went out to make my own knob: There is a…
You'll need M3x10 screws or something similar. I used some screws for plastic that are 3.1x10. Both pieces are printed in PETG and glued together. I used a 0.6mm nozzle and around 5-6 perimeters with a 50% infill.
Requires Magnets with a 6mm diameter and 3mm thickness. Moreover a M3x12 Screw (or longer) + M3-Nut is needed, that fixes the hinge of the MagSafe mount. On the bottom there are 4 places for felt stickers (20mm diameter, 3mm thickness).…
You'll need some M5x16 hexagon head screws. The rest is printed. I used ASA for the small parts and PETG CF for the stop square
I designed this divider to support my pencils inside the IKEA Skadis Container. It uses vase mode and is stiffened by an additional piece that is pushed in from the top. The Divider is held in place by the bead at the top of the container…
This desiccant box uses the lid of the IKEA 365+ 10.8l. I wanted to be able to remove the desiccant more easily than other solutions and came up with attaching the desiccant container to the lid. It is assembled with doulbe sided acyrlic…
This is a chisel rack that is designed around the Chisels from Dictum. It might work also with other chisels that have a similar tapered neck. The is also a version for a non tapered neck (in this case the file). I included the fusion…
My old bleed kit didn't have this new bleed block. So I did make my own one instead of waiting for a online ordered one. It should be compatible with these brakes: This is NOT an official posting by SRAM.
Just a nice holder for the BOSCH ProCore 4Ah Battery (also called Profactor)
I didn't like the looks nor the sturdiness of the adapter solution of the ClikValve, so I designed a supporting sleeve for this combination together the with the Cycplus mini pump. It has an hose that you should use if the valve doesn't…
Holder for the Knipex Pliers
Nice minimalistic holder for the Xiaomi screwdriver with its 4mm bits. It also matches the design of my Wera kompakt holder: ( https://www.printables.com/model/897564-wera-kompakt-10-skadis-holder )
I used the spare M3x18 screw and a nut from the LED Strip to fix my ESP32 Cam housing. It is easily adjusted with a ball joint that can be fixed by screwing it tight. I used a different lens than the standard lens for having a little…
just a nice tray for the BOSCH ProCore 8Ah battery (also called Profactor)
Just a nice Batter holder for BOSCH 18V batteries (not ProCore)
I put my XL in a shelf and I can't open the door all the way. Here's a model for everyone who faces the same problem. I included the Fusion 360 file. Just modify the angle if you need another. You'll need a M4 Nut and an M4x10 screw for…
This adapter just substitutes the original hose connection of the Lamello Zeta P2, so you can use the BOSCH click and clean hose. I printed it in ASA Prusament with 4 outer perimeters, 0.4mm nozzle, 0.2mm structural profile. Printing…
These MFT-plugs have a metal disc inside, so you can get them out of their holes. The 20mm MFT-holes are chamfered with a 45° router bit. Either you can modify the height of your router bit until the plug fits flush with your worktable or…
I wanted a simple solution to store my pliers and clamps on my IKEA SKÅDIS wall storage. I really wanted to try out the topology optimization of CREO. So I went out let it design by itself. I used the T-Nut System of 6d6178 with M2.5…
I iterated on the idea by Paul and his knife sharpening guide. Now it fits the 71mm wide Shapton Glass Stones. The Guide fits on the Shapton stone holder and is held in place by primitive snap fit. There are two version. One with a 10°…
I really liked the design of Marcurio. I only found the top and bottom a bit boring with just rectangular slots for cooling. So I reiterated on the hexagon theme. For the TOP I used the two bodies to create the hexagon patten. Just use…
My mount for my Hammerhead Karoo2 broke and I printed the version from c10l, but recognized some necessary improvements to the fit of the Karoo2. The tension of the PETG is a little bit increased by lifting the locking latch and I…
I designed this handy battery plug to seal off the contacts of my Lupine Battery, when I have a spare in my jersey pocket. Just to prevent them from corroding due to contact with my sweaty back…
This is just a holder for my Lie-Nielsen No. 60-1/2 Adjustable Mouth Block Plane.
This is just a bigger knob to turn and tighten the counternut of the Kreg Jig K4. It has a small press fit to stay on the existing nut of the jig.
I really liked the idea of putting better vibration absorbing feed under the XL. Instead of putting the foam pads under the existing TPU-feed like Extrutim, I designed a simple holder for the same foam pads. These are the foam pads I…
It might only work with the 35mm hose that is part of the GAS35 kit (Bosch PN: 2608000566), as the inside geometry is kind of important with this design. The inside diameter of the BOSCH C35 connector should be something like 32mm, as…
I took the design idea from Robert and iterated on it. I wanted to have a bit of height adjustment and the original design wouldn't look right if I used the standard M4 socket head screws from the spool holders. It is only tested with the…
This model tries to combine several principles that are used in the overflow silencer marked out there. It has a notch overflow that adds a swirl to the water so it drains faster. Moreover it has a silencer on top for dampening the sound…
There are two Version: for Bins with 29mm to maximize the volume you'll get (4.14u) with raised gridfinity grid and closed bottom, to comply with the height of 4u (28mm) Additional lids aren't necessary, as the top of the box closes right…
I need to have a my own padlock for my gym. So I made an Apple Watch body to use my old watch bands, to be able to wear the key on my right wrist. It is modeled around a the original bodies of the 40mm and 44mm sizes of the Apple Watch.…
I designed this two piece intake manifold to suck hot air at the top of the enclosure out of the Tukkari TLX MINI enclosure. It clears the PRUSA MINI and should in theory prevent that you get strong drafts when using the fan. The fan is…
Nice easy holder for the Wera Kraftform kompakt 10 screwdriver kit. I added helper discs for the adhesion of the hooks in the back. There are two versions. One with the original 9 bits and one with places for 18 bits.
This a handy small filament stopper for my drybox setup. It fits under the sealing cap of my PC4 connectors and helps a lot when connecting the drybox with the tube to the printer. I don't have to open the drybox to pull out the filament…
I really liked the already existing model. Unfortunately my sanding pad tends to be a bit thicker. So I added some clearance and minor improvements to the design (tighter fit on the systainer). In the end I added some tape to the back, so…
It is just the spacer for the HMS Insert to adapt it to the Canyon Cockpit Mount ( LINK ). Additionally you need HMS Inserts ( LINK ) and M3x20 screws, washers and nuts. You could also order a GoPro Mount with a thread, so you'll only…
I made a 3D Scan of the LBoxx Micro and modeled the inside volume, to be able to make inserts for these Boxes.
I build my own box for the heat set inserts with an LBoxx Micro. The height of the bin and its holes is measured, so the lid of the LBoxx holds everything is place. There are two version (4u & 4.14u) I also added the bins i created for…
I wanted to store my saw blades together with my saw inside the L-Boxx and to protect the saw teeth a little bit better. The Box screws together and has a lite snap fit in the middle. I attached the fusion file so you can edit it to your…
For changing the Nozzle on my XL I need a T8 screwdriver for tightening and loosening the grub screw that holds the nozzle assembly in place. I wanted to make a handle for the Prusa-supplied T8 allen key, just to find it more easily. So…
I made this holder for the BOSCH GSR12V-32 for the SKADIS T-Nut system. It uses M2.5x12 screw to fix the holder to the pegboard.
This knob just clips on the Bessey TK6 clamps. Align the center of the handle with the line on the knob before pressing it in. There are two versions. One knurled. Another with a 2K (TPE/PETG) Design.
This is a nice little solution to stick your remotes to your sofa (if it is made out of metal). I designed fitting sleeves for my 3 necessary remotes, that follow the shape of the corresponding remotes (AppleTV, Samsung TV and my Nubert…
This adapter just slides onto the Shaper Origin. I have the older model. I don't know if the newer Shaper Origin has the same geometry. The fit is pretty tight, so you don't lose the hose. I printed it in ASA Prusament with 4 perimeters.
This Mod changes the power inlet of the Tradfri LED Driver to an Wago 221 connector. You'll need 2 Wago 211-2411 straight connectors. I printed it in ASA Prusament. This mod should be only used if you're trained and feel confident to…
For this lens hood you'll need this Filter (UV, Mist, etc.) from K&F for the Fuji X100: K&F concept UV Filter for X100 It is a nice looking UV filter for the X100, that has a metal ring where you can mount magnetic accessories (like the…
I printed this model in Fiberlogy Mattflex 40D on blue tape. It has a nice snap fit to the carafe, but it needs to be printed out of a flexible filament. The model accounts for a shrinkage of approximately 0.8%.
For this lens cap you'll need this Filter (UV, Mist, etc.) from K&F for the Fuji X100: K&F concept UV Filter for X100 It is a nice looking UV filter for the X100, that has a metal ring where you can mount magnetic accessories (like the…
These are all currently available results.
