Counting matching models…
A toilet for your key ring, you never know when you might need one The difference between type 1 and 2 is the orientation of the key ring The toilet with a whistle is only type 2 No supports needed Use your favorite filament I printed…
Print the feet in as soft TPU as you can, I printed mine with 60A TPU from Recreus, the softer the better the grip. The M3 screws will thread itself. BOM M5x20 2pcs - For legs M5 Locking nut 2pcs - For legs M5x40 1pcs - For picatinny M5…
Besides the holes for a keyring I also made the handles on the jerry can a little thicker than on my original model. Update 20230408 I made the hole for the key ring on type 1 better so it fits more sizes
No glue and no hardware needed. Features two types of “gun rest” parts: one with a TPU inlay and one without. Includes two types of bolts for the main part: flat-ended or spiked. Thread tolerances have been increased for better…
Disclaimer: Please obey your countrys law regarding silencers. Fits .177 (4.5mm) and .22 (5.5mm) caliber airguns It might be tricky to get the threads right, if you have a threaded tap, use it :D
Instructions: Add an standard Gardena o-ring. Attach the hook to your Gardena Hose Connector and start filling that barrel. Printing Recommendations: Print orientation: As loaded Supports: Optional Layer height: 0.2 mm I re-modeled the…
A simple knitting thimble 6 Sizes; 15mm-20mm BOM M3x8 - 1pcs *20230803 Added step file
A solid model of a Jerry Can. Scale 1:100
A roller I made to ensure my Keenovo heatbed adhered well. Use a M5x50 screw and nut
This made an incredible difference on my 2240. Now you can hear the hammer when firing. I haven't noticed any negatives on accuracy and the FPS is unaffected. If it does not fit snuggly enough, use glue ;) Make sure you get clean…
Modular organizer boxes 51x31x106mm (single) and 167x31x106mm (triple) There are two types of the single modules, one with a 0.25mm notch and one without. The idea is that the one with notches will make it easier to get a snug fit while…
Have some fun shooting your own targets They are 139x139mm just to be sure they fit As we say in Sweden (Sorry, dosen't translate well to english): Skjut inte upp till morgondagen det du kan skjuta ner idag!
A tool of convenience.. Recommended printer settings for 0.4mm nozzle: • Layer height: 0.2mm • Perimeters: Minimum 4 • Bottom layers: Minimum 8 • Top layers: Minimum 8 • Perimeter width: 0.45mm • External perimeter width: 0.45mm • Infill:…
I made this after the measurements I found on internet of Jack Daniel’s whisky barrels. 1 Inch equals 1 mm. I printed mine with a layer height of 0.15mm and used PLA. You probably can get away with 0.20mm, with the threads in mind, but I…
Disclaimer: Please obey your countrys law regarding silencers. Fits .177 (4.5mm) and .22 (5.5mm) caliber airguns It might be tricky to get the threads right, if you have a threaded tap, use it :D See my full size suppressor here:…
This is the same as this, but with two added rails; https://www.printables.com/model/326303-crosman-2240-picatinny-for-bipod-or-laser CAD file included
Features: • Holds up to 8 12g cartridges • Sturdy design ensures durability; no flimsy construction • Suitable for regular use with airguns and air pistols • Requires 6 M3 screws, 20mm long, for assembly • Store the cases laying flat or…
Features: • Holds up to 25 12g CO2 cartridges, each securely held in place • Sturdy design ensures durability • Suitable for regular use with airguns and air pistols • Requires 2 M3 screws, 12-20mm long, for assembly Recommended Printing…
Use 2 M3x5 set screws to fasten. Includes two versions, one with the NEMESIS text as on picture and one with no text
Two models: One for nine pieces of CO2 cartridges, made for screwing it to e.g a piece of wood One single holder Print with TPU , 95A should be soft enough
Use two M3x10 Caphead screws and two nyloc nuts I had problems printing this with Arachne enabled and my 0.4 nozzle, the perimeters didn't fuse, so I had to use classic perimeter generator.
The top part of the whisky storage bottle needs to be printed upside down and can be a bit challenging. To print it hollow you need to use these settings: (see screenshot) 4 Perimeters 0 top solid layers 0% infill Use lots of cooling and…
Pretty self-explanatory I would think :) Use M6x12mm hex screws and washers
I printed mine with PLA and a layer height of 0.15mm No support needed Pay attention to the quality of the threads, generally speaking a lower layer height equals better threads, assuming your printer is calibrated correctly. Here is a…
Print it standing up, NOT as I did in my picture, that was just me being lazy so I could post a picture of it printed. -Stupid I know ;) Hardware needed: M3X3 Set screw - 2PCS
The capsule needs to be printed in TPU , as it relies entirely on friction. If the fit is too loose or too tight, try scaling it up or down in your slicer. There are two versions of the key available. The hole for the string in the…
Intended for Airguns and Air Pistols up to Approximately 10J The performance of this spinner will depend not only on the power of your gun but also on the material you choose and the settings on your 3D printer. I have created versions…
Including CAD file BOM M5x10 2pcs M5 locking nut 2pcs See https://www.printables.com/model/321956-bipod-for-picatinny for my bipod
The SuperCat mole trap is far the best mole trapper I have ever used. !!!!This is only the hole cutter!!!! Search the net or amazon.com for: Swissinno Solutions SuperCat VuldmusFall In Swedish, sök efter: SORKFÄLLA PRO SUPERCAT Eller:…
M3x10 Cap head - 1 PCS M3x14 Cap head - 1 PCS M3x20 Cap head - 1 PCS M6x15 - 1 PCS *20240214 You'll have to split in in your slicer
I made this for my RatRig V-Core3 printers with safety in mind but can oc be used with any 3030 extrusion or similar. 6 Countersunk M3 screws, approximately 6-8mm long 6 Heat inserts It is 4mm thick where it attaches to the 3030 extrusion…
A custom grip set for the Artemis CP1-M airgun. This version was designed from the ground up to be a bit slimmer than the original – not necessarily more ergonomic, but more aligned with a personal preference for form and fit. The grip…
Maya glyphs, also known as Maya hieroglyphs, form a sophisticated writing system used by the ancient Maya civilization of Mesoamerica. This script is a combination of logograms (symbols representing words) and syllabic signs (symbols…
There are two tips, one in pure plastic and one intended for a pointy grub screw. There are three different sizes for the top part, to fit snuggly on your screws head, that sits on the M8x25 screw. There are three slits on the ring to…
The hole for the switch is 12.75x19mm The holes for the cable is 5.2x3mm 2 Heatinserts M3 2 M3x8 screws Step file is included if you want to add or change anything
Recovered from the ruins of a forgotten workshop hidden beneath the cobbled alleys of The Old Kingdom, the Clockwork Vault bears the unmistakable signature of pre-Aetherian craftsmanship. Scholars believe it to be one of the last…
Made to fit with a bipod and a red dot sight
Hang it on the wall or use it as a regular box I printed the basket with 3 perimeters and no infill 0.2mm layer height for all parts No supports The text inside the lid in the photo is not on the model, starting from Prusa Slicer 2.6 you…
A snusdosa with a magnetic lid designed with durability and simplicity in mind. I aimed to keep it sleek, easy to print, and practical. The magnets provide a satisfying snap when the lid locks into place. What You’ll Need • Eight 3x2 mm…
Chances are that you printed hundreds of these little benchys, how about some revenge! -Or maybe your like me and have never printed a benchy but still finds the idea of shooting at them oddly satisfying. I made 4 different styles: Single…
The tool has two ends and a printable bolt, and the ends should be printed in different colors (e.g., red and white). Simply attach a magnet to each end, with opposite poles facing outward, and the tool is ready to use. Models for four…
Two different sizes, 9,3mm and 9,4mm This is a tribute to my favorite pellet
Two small organiser cabinets, 96x140mm and 140x140mm. Both are 77mm in depth The drawers fits both cabinets
A very effective and easy to use speed loader, load 32 pellets in about 30 seconds Works with Wildcat MK1 and other FX airguns with the same magazines Instructions: Place the speed loader on a table Place your mags Feed the speed loader…
The Stack-N-Grow Planter is a smart and modular solution for growing plants that benefit from additional soil around their stems, such as tomatoes and other deep-rooting crops. Designed with a conical base pot and stackable extension…
Made for 3030 extrusions and M6x12 screws
Assembly You will need one M3x12mm hex bolt for the wheel. To attach the tub, the optimal choice is countersunk M3 bolts up to 7mm in length. However, a regular M3 hex bolt (up to 6mm in length) will also work. (Note: Countersunk bolts…
Designed for 3mm counter-sunk screws .
This model is designed with the following settings in mind: • Inner and outer perimeter widths 0.45mm • Layer height 0.2mm
Holder plates for buck converter for one, two or three converters on one plate. Use M3x8mm or shorter
To raise the stand simply pull the gantry up, to lower it you pinch the knobs at the back that are green and yellow in the picture. I color coded all parts so you easily can see how to put it together. There are two foots, one with a 7.5…
Print in one color or two. To print in two colors you have to split it into objects first, but I guess you already know that ;) I use 0.25 as my first layer and 0.20 for the rest witch equals to 3 layers for the text. Use as is or add a…
Numbered end caps ..or just print them in a single color and get a nicer finish of the spool holder
Drill a 22mm hole in your fuel cap Print it as oriented I used PETG and printed with a layer height of 0.2mm, no supports needed Optionally you can use a 3.5mm O-ring with an outer diameter of 30mm
Print with TPU, will likely not work with a stiff/non elastic filament! Use 0.45mm outer perimeter 3mm Countersunk screws The model named Tighter has a lesser radius of 0.1mm
I printed the frame with wood-filled PLA and the bolts with Satin PLA. Due to the threading I recommend maximum 0.15mm layers.
A small goblin made from photogrammetry of a concrete goblin I have in my garden.
Hose_pt2 is for multicolor, but if you don't split it you can print it in one color. I added the step and Fusion 360 files if you want to make any adjustments. I used: M3x10 Cap head - 6pcs M3 nuts - 6pcs M5x40 Cap head - 8pcs M5 nuts -…
I highly recommend printing this as the model is oriented, on it’s side, for maximal strength. Use a brim if you’re having problems with adhesion. -If you print it with PETG and with the largest area flat to the bed you will get a…
A tribute to Sam Colt
Intended for TPU, the tolerances are small to non existent so it will likely fail with a non-flexible filament See my hole cutter here: Hole Cutter for Swissinno SuperCat Mole trap
This is an SVG file of the Aegishjalmur (Helm of Awe) - Ægishjálmur Use it with PrusaSlicer (or any slicer that supports SVG imports) to easily apply it to any 3D model you’d like to protect from evil spirits — or simply to add a unique,…
Fem stl filer En flerfärgs, den på bilden Övriga fyra för att byta färg med lagren: Två stycken med kameran åt vänster, en för limning och en med plats för skruv Två stycken med kameran åt höger, en för limning och en med plats för skruv
For mounting behind walls, these holders are designed to securely support one or two 16mm flexible conduit tubes. Each slot includes an inner lip to ensure the conduit remains firmly in place. Including a drilling template for the dual…
There is two styles of the end caps.
Behold the magic of magnetic force Each segment snaps into place, creating a smooth, seamless sphere when fully assembled 3 Sizes Features: • 8 modular segments • Magnetic assembly for a satisfying click • Desk toy and/or fidget • Fully…
Please be very careful when attaching this! I printed mine with PETG and a layer height of 0.2mm
You need two M10 bolts long enough to fit through your handle. I made a handle from a piece of wood and drilled two 12mm holes, since the handles on the wood splitter sits at an angle you have to make bigger holes than 10mm so it can…
Swedish sign saying 'Here Our laws comply'
Print it standing up as it appears in your slicer. This grip fits my Bobcat X320 MY97, but I would guess it fits many other Bobcat models too. Feel free to leave a comment with your findings. Of course you will need to print this with…
These are all currently available results.
