Counting matching models…
I wanted to build some 3D-printed jewellery using the NASA chainmail concept I found here . It turns out I wasn't able to find a STEP model of an individual hexagonal tile, there were only STLs, so I had to model my own. The two STEP…
A mold to make a cast in the shape of an anatomically correct human brain (made using the MiloMi's model ), including instructions for making the mold and the gelatine cast (see the Post Printing section). An artist friend of mine needed…
An earring in the shape of Saturn with rings. STEP file included. Instructions Slice this using concentric top surface so rings of the Saturn get a really nice surface that reminds me of the photos of the planet. It does take a bit of…
A simple pendant with attachment holes. A nice gift for poly people :) Instructions I suggest printing this in PLA (it has a nice shiny finish) with the best quality you can (100 micron layer height with 30 mm/s speed should be ok). No…
Print in medium hard TPU, use circular top and bottom pattern. Print slowly. It's better to have a slight underextrusion than too much. The model is slightly thicker than the original (2 mm vs 1,5 mm) so it squishes it a bit to help…
Book ring with less bulky design than some of the ones I've seen. Use original size for adult men, scaled to 85 % for adult women, or scale as needed. No supports needed, any material will do, print in wood-fill or stone-feel for the…
A simple set of cable clips (for bikes or pipes in general). First number in the model name is the pipe diameter in millimeters, second (and possibly third, some holders are designed for two cables) is the cable diameter in millimeters.…
A combined print cooling fan and heatsink cooling fan holder for E3D v6 hot end. Made with right-hand Bondtech BMG extruder in mind, but should be ok for most of the other ones, as long as they don't project out in front too much. Design…
This is a set of 3D-printable connectors for making heavy duty boxes out of 20 mm square aluminium profiles. The pictures shows how I used them, but they are universal for any size of box, just cut the aluminium profiles to the desired…
A fancy unicorn horn for a costume. Made from three parts so you can print it at home. Print Settings Printer: Heavily modded Craftbot Rafts: Doesn't Matter Supports: Yes Resolution: 0.2 mm or less Infill: 10% Notes: You should be able to…
A replacement hinge pin for the Flymo Turbo 400 lawnmower. The original kept falling out so I designed this one. Print Settings Rafts: No Supports: No Resolution: ~0.2 Infill: 50% or more Filament: any PETG or PC original is black Notes:…
A simple levelling screw that can be mounted on a 40mm (or bigger) aluminium extrusion. Personally, I'm using it for a large laser cutter/engraver, but it should be useful for many projects. Print three sets and you are set ;) Now with a…
The plastic housing of the tire mount on my Thule roof rack broke. This is the printable replacement part. Instructions for printing: Depending on your climate, use PETG or something that will handle the expected temps. 0.2 mm layer…
A cyclonic dust filter I use for extracting dust on my homebrew CNC milling machine. I was surprised how efficient it is, I don't need any additional filtering! :) It is based on the excellent Bill Pentz's plans . The design has 5 parts:…
A big-capacity power bank with a special design to protect the USB connectors when carried in a bag or pocket. Powerful enough to use as a power source for a TS80 soldering iron. With info for the electronics module and build…
The EKET cubes from IKEA are great, but sometimes you want to hide something, like a router, NAS, or other ugly and/or blinky things in them. This cover wil do just that + it makes a nice “eyes of Sauron” effect at night, if it is used to…
A simple paper-towel holder with a screw-on giraffe head Print Settings Printer: Heavily modded Craftbot Rafts: No Supports: Yes Resolution: 0.15 mm Infill: Minimal Notes: Print in any filament you are comfortable with to make…
A couple of Ikea Livboj charger puck holders. One is for larger phones and phablets like my Power Armor that need a 40 mm distance from the bottom of the phone to the charging puck. The other one is for a Pixel 8 Pro. I'm told it works…
A simple pendant with attachment holes I made for a friend Instructions Print using any material, ABS and PLA worked well for me, no supports needed. Category: Jewelry
A simple sleeve to put on a manometer to protect it from bumps. Should be printed with flexible material to be able to put it on. Manometer diameter is 62 mm, depth is 30 mm. Scale as needed. Print Settings Printer: Craftbot Rafts: No…
An extremely simple clip designed to be fixed with a staple gun. I find it much faster and easier to work with than the standard cable clips with a nail. Picture shows a quick and dirty install I did with these. Print Settings Supports:…
A simple cap for the Opel Ampera (Chevy Volt) MY 2012-2014 windshield fluid receptacle Print Settings Printer: Heavily modded Craftbot Rafts: No Supports: No Resolution: doesn't matter Infill: 20% Notes: A very easy print. Print in ABS or…
You know how new flat-pack furniture always seems to have razor-sharp edges and corners? Prevent the bruises by these handy protectors you can place on the corners. Print Settings Printer: Modded Craftbot Supports: Yes Resolution: 0,1 or…
An EEG electrodes holder for a basic 7-electrode EEG setup using g.SAHARA electrodes. This is my entry in the Ars Electronica 2017 Br41n.IO hackathon, awarded the second place. A result of ~6 hours of design, it is still quite rough…
An adapter to secure a cheap ball-mount Carplay/Android Auto display to the original Škoda Citigo mobile phone holder mount. Clips on the same way as the original. Thank you, Peter, for the mounting teeth design! I used this display:…
A simple funnel to make filling the Focusvape easier. Designed with a snug fit to make it stick once you put it on the Focusvape. If it is too snug, sand the smaller inside diameter a bit. Print Settings Printer: Heavily modded Craftbot…
A simple stand for the Waveshare ECP 600x488 7-color E-paper Display , designed to add a simple VESA 75 mm case for a Raspberry Pi on the back. Designed in two parts for ease of printing. Glue the stand to the back of bracket, see the…
A case for the Fnirsi DPS-150 PD power supply. With cable management. There are two versions of top cover—1 material or 2 material, where you can use TPU to make a soft cushion to avoid scratching the display screen. Instructions for…
Simple flexible pads for "Corength" brand push-up bars/grips from Decathlon. The green rubber rubs off quite quickly (at least mine did, draw your own conclusions ;) ). This could lead to marks on your floor, so these pads are meant to…
A simple holder for the ES121 electric screwdriver and 48 bits Print Settings Printer: Heavily modded Craftbot Rafts: Doesn't Matter Supports: No Resolution: 0.25mm Infill: 15% Notes: Easy print, use any plastic and choose any quality you…
A simple adapter I made to connect my plasma cutting torch to an air compressor. Use Teflon tape on the 1/4" end to screw in the rest of the armature, the hemispherical end was well sealed without any gaskets with a PET-print. Print…
This is a set of elements to build a charging station for both 12V and USB charging. It consists of three basic elements: Bottom element (bottom_case.stl) for 5 USB chargers (use this one:…
A simple housing for the 3D Systems Sense 2 3D-scanner. The original housing is twice the size and can get in the way when scanning in tight spaces, e.g. a cycle frame. This is a really simple mod, just remove the old housing and use two…
I wanted to make a safe station to connect the charging cable of my Ampera to the mains socket outside my home. The safety goal was: "cable not easily removable without crowbar." I also wanted some protection from elements (it is mounted…
If you have this coffee machine: http://www.philips.de/c-p/HD8844_01/4000-series-kaffeevollautomat , you will find that the coffe nozzles are a bit high and the coffee splashes while pouring in a normal espresso cup. It annoyed me enough…
A simple tool to safely release the pressure in emptied Petainer containers before recycling. It seems that some people got seriousy hurt by puncturing these with a knife, which caused them to explode, so a friend came up with the idea…
You can make Craftbot a lot quieter by installing dampers on stepper motors and putting it on flexible legs. Here are two simple designs, you will be surprised by the results :) Instructions The stepper motor dampers are simple flexible…
This is a simple holder for Buddy3d camera on an EnXLosure. It gives a lovely view angle that just covers the whole build plate. The camera is mounted outside the EnXLosure, so it's protected from heat, but you'll probably need to wipe…
A holder for detecting filament using a microswitch. Used for pausing prints when filament runs out. If you want to put it next to the filament roll (easier, no need to route wiring through signal chain, but a lot of filament remains…
Instructions: The adapter: Print the adapter file; it contains the adapter and two parts to fix it on the top part of the leaf blower vacuum tube. They are already oriented correctly. Any material and layer height will do; no supports are…
This is a simple soft cap for hoof stands with a cylindrical top (39 mm diameter). My friend is a hoof trimmer, and she says that horses find it much more comfortable to have something softer over the bare metal of the regular hoof stand.…
These are simple covers to make the wiring of the inverter touch safe. Both covers have a body part and the cover part. Using the top cover: Insert the hooks on the body part in the two holes, be careful not to break them; they are…
These are all currently available results.
