Counting matching models…
I couldn't find a Battlestar Galactica model from the new series on Printables, so I thought I would bring them to you from Thingiverse. I printed this great model from EDY209 on Thingiverse a while back. I also used the fixed parts by…
I couldn't believe that I couldn't find a Cylon Raider from the original series (TOS) on Printables, so I had to add this one from newtrix on Thingiverse. His is a remix of Astrofossil's design also on Thingiverse. Newtrix split the…
**********UPDATE 8/19/25***************** I just added the Power Bank files below. I forgot to upload them the first time. Sorry. If you already downloaded the files, just get the files in the Power Bank folder.…
Al Mon has a beautiful Viper MkI on Printables with 45 files. It is an awesome model. But, not everyone wants to build with that many pieces. I couldn't find a simpler one here, so I uploaded DavidBogearts two piece model from…
Great source files at Thingiverse by EDY209 and David Bogearts for a great ship of the past. However, some of the parts had holes or gaps that negatively affected the print. I did what I could to fix those files so they print better. The…
All parts are FernandoF's original scale. If you want 1:144 scale, scale everything to 115%. Fernando got it spot on. The only way to properly display a Saturn V is on a LUT. His design looks great. It's not meant to be completely…
**********Designed for TPU or Flexible filament************* The side brush broke off my Roomba. So I designed a new one. Print with supports. After you remove them, use an Xacto knife to slice between the strips of bristles to separate…
The Bevel gears that come with the VEX kits are hard to print because of the shape and the recessed parts and overhangs. These lay flat on the print bed for easy printing. Also, the kit bevel gears don't allow the 16 tooth gears to mesh…
Set of three VEX high strength gears. I've taken out all the overhangs so it prints flat on the bed. 84 Tooth, 60 tooth, and 36 tooth They include the holes, like the original gears, so they could be attached to other pieces. The hole for…
I made this stand for DavidBogaerts model from Thingiverse. His original file is X=63.51mm, Y=119.03mm, Z=45.17mm. I scaled it up 140%. I chose that size because I had a Cylon Raider model that I scaled up to 387%. I estimated the…
I made these parts to make the print better. Original model on Thingiverse: https://www.thingiverse.com/thing:2432066 The dome replacement was necessary because the original didn't seem to be fully connected on at least one half of the…
Not all liquid laundry detergent spouts are the same size, and not all cups are either, So, you need a detergent cup holder that fits various size spouts and cups. Also, a one piece holder that clips onto the spout and has the cup holder…
Boeing logo to hang on the wall. Change the filament at 10.2 mm for different color text and logo. There is a built in mounting option on the back. There is also a stand to level it so it can sit on a desk or shelf. It doesn't look level…
*************UPDATED 10/31/25******************** I shortened the brackets so the phone doesn't extend over the top of the screen. It also puts the camera at a good height for taking videos (see picture).…
Vexanix did a great job on his design, but it wouldn't fit my phone with its case. I had an iPhone 12 Pro. It also fits my iPhone 16e. The brackets can hold a phone, with or without a case, up to 13.75mm thick and 149 mm tall. While I was…
Some parts will also work with: @Josefson_162880 SpaceX Starship and orbital launch tower 1:144 scale (He actually just uploaded MikeNotBrick's design) @hulkbuild_267368 Starship Orbital Launch Integration Tower "Mechazilla" @Anubiz3D…
My son forgot to bring his slow feeder bowl when he left his dog with me while he's on vacation. So, I quickly did a simple design to solve the problem. It holds about 1 cup of food. I may tweek some things to make it better after I…
Many times when you buy a new baseball cap, it comes with a thin cardboard support for the front to keep its shape. These three different shaped hat supports do the same. They are only .7mm thick, so they print pretty quickly. You can…
I couldn't believe that I couldn't find a Cylon Raider from the original series (TOS) on Printables, so I had to add this one from newtrix on Thingiverse. His is a remix of Astrofossil's design also on Thingiverse. Newtrix split the…
The old school Battlestar Galactica logo with the “angel” lady on it. It looks great because I put the flowing parts of her dress at different heights to give depth. It is about 9" (224mm) diameter. There is a screw/nail hole in the back…
So....I made these to tease my wife. She has a Compass, and is not very adventurous. Hence, "For the flat road ahead" on the Compass ornament. I have the Wrangler so I can go off road. Hence, "What road?" on the Wrangler ornament. It may…
Holds three hard taco shells upright for filling them with all your favorite toppings.
I made these for the OLD models that I built in the 90's. I have no idea what brand they are, but I do know that the B-Wing and Tie Interceptor had gold finishes in the box. I painted them instead. They both have a hole on the bottom for…
It is about 8-1/4" (210mm) diameter. There is a screw/nail hole in the back to hang it on a wall. Change the filament at 13.2mm for two-tone look. I used an old printer that I only use for test prints, so don't let the poor quality of the…
I designed this for my 2015 Jeep Wrangler Sahara Unlimited. I know they will fit other models and years, but I don't know which. To get the two toned look, you have to change the filament at the correct height. I printed it with the…
I designed this for my 2015 Jeep Wrangler Sahara Unlimited. I know they will fit other models and years, but I don't know which. It is open enough that you can still see most of the light from the blinker (see picture). The fog light…
************UPDATED 10/26*************** I realized that this couldn't easily be printed on a smaller (Ender 3, Ender 5, Prusa MK4S, etc) printers. I updated the size to fit smaller build plates. It is (W) 206mm x (L) 175mm x (H) 135mm.…
I designed this for my 2015 Jeep Wrangler Sahara Unlimited. I know they will fit other models and years, but I don't know which. There are three sizes because the two cup holders in the front of my 2015 Jeep Wrangler are different sizes.…
I made two versions of the Imperial Cog to choose from. Both of them are 100mm circles. They have a cutout on the back to hang on a nail or screw. There's also a foot that connects to sit on a desk or shelf. imperial cog desk wall…
A student in an autistic classroom that I sub in got angry and broke the knob off the Samsung dryer. Luckily for the teacher, I'm pretty good at designing things. It pops on and works just like the original. It would also work on the…
The picture shows the 78mm front insert. The other picture also shows the Battlestar Galactica insert. I designed this for my 2015 Jeep Wrangler Sahara Unlimited. I know they will fit other models and years, but I don't know which. There…
Vexanix did a great job on his design, but it wouldn't fit my phone with its case. I had an iPhone 12 Pro that I always had either the Imperial Cog, Rebel Alliance, or SpaceX case with built in two credit card holder that I designed (see…
Designed to hold wrenches or scissors on pegboards with the large holes and larger matrix of holes. Print 2 of the barrel pieces and 2 of the holder files for each. They should friction fit together, but you can also put a drop of super…
******I haven't printed this yet. Will update pictures after I do******* I designed this to fit my iPhone 16e with a built in credit card holder on the back. The card holder holds 3 cards firmly. I have a version to hold 2 cards…
The square and round wheel hub inserts for the VEX wheels don't stay in place, so these replace them. I put a few drops of super glue on them, insert them into the hole, and pound it in with a hammer. The hole for the shaft sometimes…
********Designed for TPU or Flexible filament******** Replacement handles for my nippers. I printed in TPU, but I imagine it would work with PLA also. Also shown in the picture is my nipper holder . Scraper Holder also available.
I designed this to fit my iPhone 12 Pro. I don't know if the dimensions for the 12 Pro and iPhone 12's are the same, so I don't know if it will fit a regular 12 or 12 Pro Max. If you try on something other than a 12 Pro, please leave a…
******I haven't printed this yet. Will update pictures after I do******* I designed this to fit my iPhone 16e. If you want to change colors for the holder and/or logos then change at 13 mm. I added built in supports, so DO NOT enable…
My friend got this set for his grand kids, but the tracks included only let you make a circle or oval. The curve pieces only allow for turns in the same direction because of the connectors. He asked if there was a way to make curves that…
Vexanix did a great job on his design, but it wouldn't fit my phone with its case. I had an iPhone 12 Pro that I always had either the Imperial Cog , Rebel Alliance , or SpaceX case with built in three credit card holder that I designed.…
My son wanted something with the Boeing Phantom Works Phantom Man logo on it. I made several versions for him to choose from. All of them are 150mm circles. They have a cutout on the back to hang on a nail or screw. NOTE: I've changes the…
The old school Battlestar Galactica logo with the “angel” lady on it. It looks great because I put the flowing parts of her dress at different heights to give depth.It is about 4-½" (112mm) diameter. There is a foot that fits into the…
A science teacher at my school asked if I could design a simple thermometer holder that would clip onto the edge of a beaker and hold the thermometer upright. She showed me one in a science equipment c catalog for about $10 each. I told…
World Cup Fever! I remixed a Jeep Duck with the Jules Rimet FIFA World Cup Trophy. There are five versions. WorldCupDuck.stl--Just has the duck body and the trophy. There are no eyes or duck bill. (Pictures 1-3) WorldDuck.stl--This has…
*************I have a 2015 Wrangler Sahara Unlimited. I know it will work with other year Jeep Wranglers, but I don't know which. I know that many 3rd party add-ons say that they fit somewhere between 2007-2017. See the pictures of my…
The picture is of the 78mm front seat insert. The other picture also shows the 74mm Battlestar Galactica insert. I designed this for my 2015 Jeep Wrangler Sahara Unlimited. I know they will fit other models and years, but I don't know…
I bought a Dual Z Upgrade Kit for my Ender 3 Pro awhile back. The PSU had to be relocated. The bracket that came with the kit was pretty flimsy (see the second picture). The back bracket broke, so I had to make a new bracket. I made two…
*******UPDATED 2/26************* I tweaked some measurements and added built in supports, so DO NOT enable supports in the slicer. For some reason after an update, I couldn't get PrusaSlicer to put in supports unless I painted them on. It…
*******UPDATED 2/26************* I tweaked some measurements and added built in supports, so DO NOT enable supports in the slicer. For some reason after an update, I couldn't get PrusaSlicer to put in supports unless I painted them on. It…
UPDATE 5/26 I recently upgraded from my 2015 Wrangler (white pictures) to a 2022 Wrangler (red pictures). The new one didn't have the same holes for the bolts. There are 3 threaded holes that take M8x 25 1.25 pitch bolts (I think. It…
I designed this as a stand for Bertinchamps F4U Corsair ( https://www.thingiverse.com/thing:1470382 ), but I think it would work for any airplane model--3D printed or store bought. I made one for a store bought corsair model that I messed…
******************UPDATED 12/25******************* The Back and Front and Back Brackets have been updated. The shape of the bottom of the brackets were too low and caused collisions with the X-axis carriage which messed up the X-axis…
*******UPDATED 2/26************* I tweaked some measurements and added built in supports, so DO NOT enable supports in the slicer. For some reason after an update, I couldn't get PrusaSlicer to put in supports unless I painted them on. It…
File updated The holes are offset from the center. This allows it to be used as a swivel wheel without the attached motor. With the holes, hence wheel, in the middle, the bracket won't rotate when the vehicle changes direction (think…
I made these to be able to attach the VEX V5 Charging Dock ( https://www.thingiverse.com/thing:4182218 ) by Evansphysics to a table. In the picture, these parts would attach to the two ends of the row of docks to secure it to a table. In…
************UPDATED 12/25*********** They were too tall and caused potential X-axis calibration issues. It happened to me when I was testing and fixing collision issues with the bearing filament holder I have. When I tried to calibrate…
This is supposed to look like a spinning propeller. I used a thin wash of black for the inside. The outside ring is yellow for the yellow on the tip of the blades. I don't know if this qualifies as a remix, but I made this to go on…
I designed this to change the angle of the footpegs on my Jeep when I take the doors off. I printed them with TPU, so they are cushioned against the paint. I don't know if they will work with every footpeg. These are the ones that I…
Simple clip that attaches to the 40 mm front metal frame of the Ender 5 (or other printer with a 40 mm metal frame piece) and holds nipper cutters. I didn't plan for this, but you can see in the pictures that I also slid a pair of…
Simple clips that attach to the 40 mm frame pieces of a printer. There's a built in gap for a ribbon cable to fit behind them. The picture shows multiple of them holding the my SD card adapter in place.
Some morons broke into my 2015 Jeep Wrangler and broke the center console open, because I foolishly thought that being locked would be able to stop someone. The plate that the console lid catches to hold it shut was broken (picture 1). I…
There are two versions. One is bigger. They both have a separate leg of the “X” that can be printed in a different color and glued onto the base. I did a the big version with a white base and changed to blue filament at 8.2 mm. I did the…
The picture is of the 74mm front seat insert. The other picture also shows the 78mm Rebel insert. I designed this for my 2015 Jeep Wrangler Sahara Unlimited. I know they will fit other models and years, but I don't know which. There are…
I designed this to fit my iPhone 12 Pro. I don't know if the dimensions for the 12 Pro and iPhone 12's are the same, so I don't know if it will fit a regular 12 or 12 Pro Max. If you try on something other than a 12 Pro, please leave a…
Don't you hate trying to load filament but there is nothing to put your thumb on to get leverage? Your problems are over! This simple handle attaches to the extruder and provides a place for your thumb so you can easily get the leverage…
I designed this to fit my iPhone 12 Pro. I don't know if the dimensions for the 12 Pro and iPhone 12's are the same, so I don't know if it will fit a regular 12 or 12 Pro Max. If you try on something other than a 12 Pro, please leave a…
Simple clip that attaches to the 40 mm front metal frame of the Ender 5 (or other printer with a 40 mm metal frame piece) and holds a putty knife/scraper. Nipper holder also available.
Designed to hold wrenches or scissors on pegboards with the small holes and smaller matrix of holes. Print 2 of the barrel pieces and 2 of the holder files for each. They should friction fit together, but you can also put a drop of super…
*******UPDATED 2/26************* I tweaked some measurements and added built in supports, so DO NOT enable supports in the slicer. For some reason after an update, I couldn't get PrusaSlicer to put in supports unless I painted them on. It…
*******UPDATED 2/26************* I tweaked some measurements and added built in supports, so DO NOT enable supports in the slicer. For some reason after an update, I couldn't get PrusaSlicer to put in supports unless I painted them on. It…
My son wanted something with the Boeing Phantom Works Phantom Man logo on it. I made two versions for him to choose from. Both of them are 100mm circles. They have a cutout on the back to hang on a nail or screw. There's also a foot that…
****************UPDATE************** Someone messaged me asking if I was making one to fit a 2025 Wrangler. So, apparently this version may only go up to 2024. *************************************** I have an iPhone 16e that I always…
I designed this to put in the window of my Jeep Wrangler. It says "Jeep" in aurebesh, the Star Wars alphabet. It slides between the windshield and the white metal strip (see the picture). Change the filament at 2.2 mm to get the two tone…
It is about 100mm circle. It has a cutout on the back to hang on a nail or screw. There's also a foot that connects to sit on a desk or shelf. There will be a color change after the background prints. The Rebel symbol will be the second…
I imagine this sitting next to a Stormtrooper's helmet when he gets back to his quarters after a shift. This prints in several easily assembled pieces. It also comes apart easily if you need to get the cable out to take it on vacation.…
Simple symmetrical cam gear so the direction of travel is reversible.
The picture shows the 70mm back seat insert. The other picture also shows the Imperial Cog insert. I designed this for my 2015 Jeep Wrangler Sahara Unlimited. I know they will fit other models and years, but I don't know which. There are…
******I haven't printed this yet. Will update pictures after I do******* I designed this to fit my iPhone 16e. If you want to change colors for the words and logos then change at 13 mm. The letters in "Space" are 1 mm taller than all the…
Simple tool holder for 3D print tools, model making tools, and art tools. They both also have side holders for pliers and nippers. The first 3 pictures show the “3d print and model tool holder.stl” You can see the variety of tools that…
A student in my shop class stood on the magnet to try to ride it like a scooter (yes, it was a middle school boy). I made a replacement wheel. I had to use a nut and bolt to attach the new wheel. The original attachment pin wouldn't work.…
Any of the other ones I found didn't have a large enough slot at the back to fit the ribbon cable through. You'll have to remove the end cap to slide the adapter on. The pictures show it on the inside because I have used another mod to…
**** Designed for TPU or flexible filament **** I got a couple different brands of the 360 degree interchangeable magnetic tip USB charging cables. One brand had a nice cable tie that held the extra tips. The other brand didn't, so I made…
--Tweaked some measurements and added the stem at the bottom. This fits in the hole on the toilet and helps keep the piece from sliding around. I printed with 15% support. --Also made the groove at the top smaller so it is a little…
I made the 106mm version for a spherical glass container that I put the holder into first, then added beach sand and shells from a trip. Those things pretty much covered the holder so it couldn't be seen. The stand held the tea light…
Best with TPU or flexible filament. The rabies tag makes a lot of noise when the dog shakes. And the edges get pretty beat up over time too. I made this to muffle the noise and protect the tag, especially now that you can get 3 year tags…
I was in such a hurry to beat traffic from the Indy 500 (300,000 people) that I forgot to attach the retaining plate and knob to the bike. Luckily I had used my lock to lock the bike to the spare tire! So I only lost the plate and knob. I…
I don't have this phone. I used the model by Satyr. You can see the mesh in the holes showing that they line up with his model. If you want to change colors for the words and logos then change at 13 mm. The letters in "Space" are 1 mm…
I don't have this phone. I used the model by Satyr to align the buttons. If you want to change colors for the words and logos then change at 13 mm. The letters in "Space" are 1 mm taller than all the others. You can print all the other…
I backed into a concrete wall and broke the reflector off the bike rack :-(. This isn't actually a reflector, but it fills the hole. I used glow-in-the-dark filament for most of it to at least make it visible at night. I printed one layer…
My son wanted something with the Boeing Phantom Works "Phantom P" (my name) logo on it. I made several versions for him to choose from. The extruded version has the background and then a color change at 10.8mm. Pictures coming soon. The…
My son wanted something with the Boeing Phantom Works "Phantom P" (my name) logo on it. I made several versions for him to choose from. The extruded version has the background and then a color change at 10.8mm. Pictures coming soon. The…
I designed this to fit my iPhone 16e with a built in credit card holder on the back. The card holder holds 3 cards firmly. I have a version to hold 2 cards available. If you want to change colors for the holder and/or logos then change:…
I designed this to fit my iPhone 16e with a built in credit card holder on the back. The card holder holds 3 cards firmly. I have a version to hold 2 cards available. If you want to change colors for the holder and/or logos then change:…
*******UPDATED 2/26************* I tweaked some measurements and added built in supports, so DO NOT enable supports in the slicer. For some reason after an update, I couldn't get PrusaSlicer to put in supports unless I painted them on. It…
I designed this to fit my iPhone 16e with a built in credit card holder on the back. The card holder holds 3 cards firmly. I have a version to hold 2 cards available. *****I think I'm going to update this soon and move the Boeing logo…
I say this fits 2018-2026 JEEP Wranglers and Rubicons, because that's what the Amazon description says. I have a 2022 Wrangler and I designed this for the metal door storage box I bought to replace the ridiculous door nets. Here is a link…
I designed this to fit my iPhone 16e with a built in credit card holder on the back. The card holder holds 3 cards firmly. I have a version to hold 2 cards available. If you want to change colors for the holder and/or logos then change:…
*******UPDATED 2/26************* I tweaked some measurements and added built in supports, so DO NOT enable supports in the slicer. For some reason after an update, I couldn't get PrusaSlicer to put in supports unless I painted them on. It…
I say this is for 2018-2026 Wranglers and Gladiators, but I designed this for my 2022 Rubicon. I'm assuming that it fits the other years and models because most of the accessories on Amazon say they are compatible for those years and…
******I haven't printed this yet. Will update pictures after I do******* I designed this to fit an iPhone 16e ProMax If you want to change colors for the holder and/or logos then change at 13 mm. I added built in supports, so DO NOT…
