Counting matching models…
A poop collection tray designed for the Phrozen Arco printer. Can be placed behind the printer and snaps with magnets to the plate below the poop exit. A foot that goes under the printer has been added and makes it easy to place the tray…
This design makes it possible to connect a 27mm hose to an IBC container with std. 60mm valve / tap, thus avoiding spillage when draining water or whatever is in the tank. The design includes hose adapter and o-ring. Should be printed in…
I wanted to close the big gab behind the Chroma Kit on my Phrozen Arco. This design leads the tubes inside the printer from behind the Choma kit, from being in a line to exit in a square. Two new revisions has been added. V2: Tbe manifold…
Herrnhuter inspired Christmas star. Design include stars with a 200mm, 250mm and 300mm diameter. Two star shells is required and should be glued together after eventual adding some LED light to the star tips. The foot can be used if a…
If you have chickens in your garden or elsewhere to get eggs, then you probably know that it can be a challenge to collect eggs without droppings etc. on the eggs. I have designed this system consisting of a egg draw and a lid with a…
This filter adaptor is for the low pressure side of the Nilfisk pressure washer. It's a part that might break if someone add a force at the water intake connector. If broken, the machine is useless, while this filter adaptor is not…
Stand for a shaver / razor with place for shaving brush and a modern shaver like Gillette Fusion 5 or similar. (See photos) Can be printed in PLA or similar. Diameter for the brush fixture is set to 37mm. Instructions: Material: PLA or…
I have made some new tool holders to my Mitsutomo steel wall, as replacement and addition to the original supplied holders. In Denmark available at “Harald Nyborg” Contains: A big screwdriver holder with 34 tool holes and option for…
If you need a compact temperature controller for a project can this one perhaps be a solution together with my design https://www.aliexpress.com/item/4001226880181.html?spm=a2g0o.order_list.order_list_main.4.2fb21802cFmn5d Required…
While waiting for the Colour Chrome, would it be nice to have the filament on the top og the Arco printer when the Penta Shield is mounted. This design is a backed for the included spool holder. it shall replaced the top lid window and…
This design is intended to be used together with a IKEA Trofast baskets. https://www.ikea.com/se/en/p/trofast-mesh-storage-box-light-green-grey-90518574/ The rails can be mounded below any flat surface and thereby convert the IKEA Trofast…
Made this design for adding Gridfinity bins etc. to my Mitsutomo tool wall. Can be used on any wall plates with a 18.5mm matrix of 6mm square holes. (In Denmark available at Harald Nyborg) There is only base plates in this design, use one…
Twisted hexagon boxes with lid. Box and Lid with identical sizes fits together. Should be able to print on any FDM printer in Vase mode. Settings: Vase mode Nozzle: 0.4mm Number af bottom layers: 1-5 (I have used 3 bottom layers) Layer…
This expansion ring has been designed for a fruit dryer with a 230mm diameter. The expansion ring is 88mm high and can be stacked if more drying capacity is required. Instructions : Material: PETG, ASA or ABS is recommended due to the…
I needed a wallmount for an eBike, so here is my design. Designed for a rectangular charger 72 mm wide, 41 mm high and 180 mm long (can be almost any length) Instruction: Material: PLA or PETG Nozzle size: 0.4, 0..6 or 0.8mm Infill:…
Snap-click holder for a Sunlu vacuum pump. With integrated honeycomb wall insert. Designed for the Honeycomb storage wall by RostaP | Download free STL model | Printables.com Instructions: Material: PLA, PETG or ABS Print direction: With…
I have made this design for adding an additional webcam to my Phrozen Arco FDM 3D printer. It might only be useable without the Color Chrome kit mounted. (have not been able to test it together with the kit.
This design can be used to cover a Solid State Relay (SSR) like this from Aliexpress: https://www.aliexpress.com/item/1005005622403328.html?spm=a2g0o.order_list.order_list_main.34.1ca018023mtcXT My usages is a USB powered mains switch.…
We needed to have our remote controls for our bed placed somewhere so they are always easy to find and don't get lost. This design consists of two versions V1 : is designed to be placed at the top of a wall or bed headboard, where there…
I had to shorten the UPPDATERA draw insert to fit my draw. This design contains two new end pieces to the draw insert, so you can shorten the bamboo insert with a saw and and a new end piece. There is a end piece for each end of the draw…
This extender can be used if an extra role of filament shall be used together with the Chroma Kit. It can be combined with my Chroma Kit manifold: Print instruction: Material PETG, ASA, ABS or PLA ( I have used ASA) Support: not required…
Charging station or fixture for my new smart watch. Has a slot for the magnetic charger plug and grab the watch in correct location while charging. Print instruction: Material: PLA or whatever you have. Support: Not required. Else do as…
I needed an organizer for gift ribbon and created this snap clip for 8 and 13mm sound sticks. But can be used for many other purposes. I had a wooden box and have added one snap click in each side of a round stick and there by got four…
If you need a replacement for the filament spool holder is here one you can print. Print settings: 3-4 wall loops and top/bottom layers. Infill 20-30% Support: None. Material: PETG or ASA due the the load at the arm. Photos: Original Arco…
This design contains three parts: A Leg, a join-clips and a rubber feed. Instructions: You will need four legs, Two or three join-clips and eventual four rubber feeds. Assemble the parts by clicking the legs into the join-clips and put…
These are all currently available results.
