Counting matching models…
Field Notes are great for capturing… well notes, but sometimes it'd be nice if you had something hard to write against. This little clip board has a spot for your pen and a loop for rope or a lanyard if you so choose. It fits most pens,…
About It gets pretty cold where I live and the heater I bought wasnt cutting it. Everyone has one of these diesel heaters according to youtube, so I decided to try one. The intake and exhaust come out of the bottom and if you dont put it…
About I bought this cheap little camera figuring I could either make a box and mount for it, or someone else would have one ready. I didn't see any options I liked that were pre-made, so I came up with this. Uses standard action camera…
A few fork seal drivers, if you need additional, let me know and I can make them pretty quick!
Deets The chain slider on our beat up old XT225 finally gave up the ghost. Ive been wanting to fix it, but it gets ridden a lot. Thankfully the old one broke off so the swing arm didnt need pulled. This model omits the angle for the…
A friend was looking at buying a pre-made plate frame and the price was a bit much. I figured this would be easy to make. Thanks to @CRAmerican_274330 for sharing a blank template that would work perfect for this, saving trouble of…
I printed from TPU 95A and ironed the top surface to make it more smooth. Should work well, will see over a few months how it works out. Fits a ton of models: 16019-008, 13251-33110, 168-14184-00-00 1973 Kawasaki F11 250 1974 Kawasaki F11…
I originally made this to hold the bottom section of my Kawasaki H1 500 fork tubes. Removing fork seals is annoying, and doing so without marring the aluminum is tough. These clear the brake caliper mounts, and have 6x2mm neodymium magnet…
Had custom stainless lines made for my vintage Kawasaki H1 500, along with different brakes that use a traditional banjo. Several ideas for keeping the line close, but this seemed fun to make. Updated this model. Marked it as V2, but it…
Printing Mine are printed in PETG, they may warp on super hot days, time will tell. ASA or PA6 might be better long term options. The ones on the bike I am fixing are rusted and cheap and ugly. This seemed like a fun project for a boring…
I made these to rebuild my Kawasaki H1 forks, they should work for any 36mm fork. 6x2 magnetic insert holes allow for press fit, which will keep the soft jaws in place while you work. I used IEMAI PETG CF with Anycubic Kobra S1, .6mm…
About We do an annual trip that includes some road riding and occasional after dark shenanigans. This year we are all riding small bikes. My KLX125 didnt have a headlight, so I made the necessary parts to fit one. This will work with…
About Not an exact match for Kawasaki Part Nr 11012-011 as I didnt have an original to work from, but this allows for the commonly circulated K&N style air filter. I didnt plan on getting the whole canister assembly, but wanted to make…
About See what it looks like here: https://www.youtube.com/shorts/_z8Omeqew1A NOTE: YOU NEED TO BE COMFORTABLE WITH WIRING AND MODIFYING YOUR ELECTRICAL SYSTEM FOR THIS MOD. I AM NOT RESPONSIBLE IF IT GOES WRONG FOR YOU OR YOU RUIN YOUR…
About I have a hard time swallowing the price of a name-brand Pi and started with an Orange Pi 3LTS. Took a bit more work to find some things, but it does its job faithfully in the house. I scored a deal on an Orange Pi 3B which has some…
This model is based on drawings originally provided by the Kawasaki Triples community https://kawatriple.com/caliper/EX.jpg https://kawatriple.com/caliper/conversions.htm
About If you've ever used an ESP32 with a bread board, you know they are an annoying size! I found these breakout board that provide an easy 5v power source, and easy access to pins. I have been working on a few projects, one of which…
Printing More walls are better, At least 3. Probably will work will work with PLA, but might be junk after. PETG will also work great, but I recommend not using a metal hammer as it can shatter sometimes. I used 3 walls and 30% Infill…
Printed from PETG in this example. I just wanted something to hold a hose down in the jar while I tested float heights. I will probably use this for other things, but might as well share.
Print with 15% infill TPU, could be made thicker if necessary
92075-169 A TPU printable version of the original rubber damper. Note that there is a recess in the bushing and it will turn out ugly without support. I am using them today on my bike, they seem to fit appropriately! Doubt anyone will use…
About Computer was too wide and didnt fit. My partner wanted to return it, but it looked like an easy fix. This uses M6x8xwhatever heatset inserts. If you want holes without the heatset inserts or you want a different size just let me…
This should be a mostly accurate reproduction of 92075-091. I didnt have a pristine version to work from, but it worked well enough for me. Currently installed on my bike. Sharing on the off chance that 3d printing and vintage bike…
About I bought a fancy metering rod carb for my bike, but it wasnt working right. The stock one worked mostly fine other than the choke no longer working. I dont know why keihin used plastic choke arms and failed to make a replacement…
About I bought an ultrasonic cleaner years ago on the jungle site. It arrived with a busted knob, but I didn't want to return it. It worked okay with some glue and CA glue for years. When the heater died in the cleaner, I decided to do…
Printing I designed this with the plan to use TPU-GF from Siraya Tech. That said, I think for most bikes it would hold up with just about anything other than PLA. If you want a variation of these, yknow different size or different screw…
Printing This model is almost 1:1, with some adjustments made for printability. I have made other variants to adapt larger carbs, but I figured I would share this one. Originally wanted to make a mold and cast them from urethane, but I…
About Not even sure this is worth a model, but someone might save some time somewhere, so here it is. I needed a cheap power supply to run my 12v Vevor diesel cabin heater in the garage. The turd needs like 15amps at 12v to run! One might…
About Have you seen the prices of these stupid things. I am not willing to pay that. This is pretty close but probably a little off as I did not have the actual rubber bit to work from. I was able to work backwards and design one pretty…
Printing The original throttle tube has some large features included to hold the factory grips in place. I was not planning on using OEM grips, but did not want to destroy the original tube to accommodate aftermarket. Even so, I figured…
I bought new replacement CDI and Regulator Rectifier modules from Rick's Motorsports and wanted to sell my original working units, but would be missing the mounting plate.…
I printed these out of TPU, but they could probably be done in PLA or whatever else too. Not sure if they will fit other models, but designed these while building my early frame H1. Highly doubt anyone will use them, but if you do, please…
About My old Kawasaki H1 500 projects are in various states of disrepair and some parts are either too expensive or impossible to find. Figured this would be easy to model and be around for anyone who needs the same thing I do. It looks…
About Needed some lighting for a KLX125 aka DRZ125 which does not have a lighting coil. Considered winding the coil, but really only needed it for a weekend, and a dewalt 20v battery seemed like a common suggestion. I used a cheap adapter…
About Like the title says, I made a palmrest for my keyboard as I couldnt find one that I liked. I have large hands and found myself putting my phone or other things under my hands for strain relief. I am trying out a non-split keyboard…
These are all currently available results.
