Search results: 15mm

Sort order

899 models

P
PrintablesAndreas W

KUNA laptop stand with 15mm clearance

I printed a set of these but found them to not fit my Razer Blade laptop and also being a bit large. The angle the laptop gets with the original stand made it uncomfortable using the keyboard, I just wanted a very slight lift to help with…

Downloads
3,038
Likes
347
Rating
4.84
P
PrintablesModu

Turbo Fan / Jet Fan - Magnetic Nozzle (15mm)

This is an alternative nozzle for a Turbo Fan/Jet Fan, featuring much higher nozzle pressure than the stock version. In my opinion, it offers the perfect balance between pressure and airflow. There's a small notch on one side, which…

Downloads
856
Likes
135
Rating
5

gridfinity 1x2 bin dremel tools, spanner, chuck and std. dremel 3.15mm (1/8") tools

Gridfinity bin for Dremel It has a 1x2 bin footprint. Used for Dremel spanner, chucks and standard 3.15mm (1/8") tools. I really needed a bin with both spanner and tools, and figured I'm not alone. There's no lip on the bin since You…

Downloads
418
Likes
121
Rating
5
P
PrintablesObe_Design

PVC pipe holder 15mm - 20mm

These are 3D-printed PVC pipe mounts, designed to be secured with M3 bolts. They are commonly used in electrical conduit installations and are available in different sizes to fit various pipe diameters. Perfect for mounting pipes to walls…

Downloads
118
Likes
26
Rating
5
P
Printablesthomers

Axial Fan 70x70x15mm

This is a non-functional model of a 70x70x15mm axial fan. The easiest print position is lying on it's propeller side with organic supports:

Downloads
98
Likes
8
Rating
0

Female Buckle Replacement for 15mm Strap

This model replaces the female buckle piece on my Northface backpack. It may be compatible with other brands that utilize a 15mm strap as well. It is printable without supports when printed vertically on its “legs” (the STL should be in…

Downloads
90
Likes
15
Rating
0
P
PrintablesAidan

15mm Extrusion End Cap

I could not find a model for endcaps for 15m wide extrusions so I designed some. Just print at a normal .2mm layer height and snap onto the extrusion. It sure does beat buying them and having to wait 😃.

Downloads
62
Likes
9
Rating
0
P
Printablespaintedgyp

Keychron Knob (15mm tall)

I utilized a portion of BradleyM1's Keychron Knob Riser to make a standalone 15mm tall knob, for my Keychron K17 Max. It fits other keyboard models with a 6mm diameter stem. Top of knob sits about 16.6mm from top of case, a few mm higher…

Downloads
41
Likes
8
Rating
0
P
PrintablesVomDeich

Corner Clamp 90deg 5-15mm

This design supports material from 5-15mm thickness. The clamps are more easy to handle than angles with seperate clamps, but will only support joints of equal thickness material. Concept is based on idea of takuwoodcraft / TWCDesign.…

Downloads
3,458
Likes
1,833
Rating
5
P
PrintablesChiprobot

The Mistyfier - V3.0 Clean Bike Chain Luber (Update inc. 15mm Gap version)

This attachment enables a spray can to spray a stream of Oil/Wax or Brake-fluid directly and only to the chain (i.e. avoiding overspray onto bike frame , tires and disk rotors) , less mess, less waste and more time to ride…….. I am blown…

Downloads
2,985
Likes
1,277
Rating
5
P
PrintablesStranula

Multiboard Corners 45° & 90°, 6.25, 8, 12.5 & 15mm

I have an insider corner above my workbench where I am putting up a multiboard. I couldn't make any of the premade brackets work for my needs, so I made my own. These are working for me and can be seen in the attached images Updated…

Downloads
2,288
Likes
329
Rating
4.9
P
PrintablesLeapTechOnline

Pipe Lagging Insulation - Template Jig - Cutter - 15mm 22mm 28mm

A set of simple tried and tested pipe insulation cutting templates. I was sick of doing it by eye and then noticed people selling similar online but they were either overpriced or a bit "janky". I spent a fair bit of time sorting these…

Downloads
1,871
Likes
642
Rating
5
P
PrintablesFelix Wiseman

1×5.25" Optical Disk Drive Bay to 4×2.5" up to 15mm thick

This print is a conversion from now mostly useless optical drive bays (discs/DVD/CD bays), AKA 5.25" drives. The adapter will fit up to 4 2.5" drives instead and can fit all standard formats (so each of the 7mm, 9.5mm, and 15mm thick…

Downloads
1,662
Likes
194
Rating
5
P
PrintablesElitail

Ikea Skadis Hook 115mm

To be printed on its side If you will print this model, please post a make. Thanks! P.S. Thinner remix exist to fit US Skadis: https://www.printables.com/model/975385-skadis-hook-115mm-na-skadis

Downloads
1,110
Likes
155
Rating
4.82
P
PrintablesJake Reeves

Perforated Sink Sponge Holder(s) - Single + Double Sided (15mm or 20mm Pinch)

After looking through a few different models online, I decided to create my own sink sponge holder and include some perforated holes that allow any water to easily drain away from the sponge - preventing moisture build-up . This was…

Downloads
1,078
Likes
131
Rating
4.92
P
PrintablesBeo666

Linealanschlag für Metalllineale (15mm x 1mm)

Dieser Anschlag ist für Metalllineale mit den Maßen 15mm x 1mm (Breite / Dicke) konstruiert. Er lässt sich problemlos drucken, keine Stützen etc. Es wird auch kein zusätzliches Zubehör benötigt. Weitere Größen sind unter meinem Profil zu…

Downloads
1,055
Likes
414
Rating
5
P
PrintablesMike Rainbow

Bosch 115mm angle grinder drill bit sharpener attachment

Ive designed something to clamp over the existing guard on a bosch 115mm angle grinder then clamp your angle grinder to a bench to sharpen 12mm, 10mm, 8mm, 6mm, 5mm, 4mm drill bits 2x 90mm 8mm bolts & nuts required. mine are my usual CF…

Downloads
1,022
Likes
149
Rating
5
P
PrintablesIzzy0wlPrints

15mm Crochet Hook

To help reduce the chances of yarn snagging on your hook, I recommend printing at the lowest layer height you can. Some sanding may be needed, but for me wasn't needed. Happy crocheting! Layer height 0.12 mm Infill 25% Wall shells 3 PLA…

Downloads
990
Likes
123
Rating
4.8
P
PrintablesMateusz Tokarz

Nail-In Cable Clips | 10 Sizes (3mm to 15mm)

BOM: Printed with ROSA3D High Speed PLA Gray Save yourself a trip to the hardware store! This is a complete set of classic, nail-in cable clips for routing wires along baseboards, walls, or door frames. Key Features: Nail Compatibility:…

Downloads
910
Likes
433
Rating
5
P
PrintablesBowlerman72

Nut M10 4x15mm for PC4-M10 PTFE coupler

I needed a simple nut for the PC4-M10 PTFE coupling when making a drybox. Nothing fancy, created in OpenSCAD with “Nuts and Bolts v1.9.6 OpenSCAD library” by biomushroom that you can find here: https://www.thingiverse.com/thing:965737…

Downloads
880
Likes
77
Rating
5
P
PrintablesBasementLAB

Mechanic Parts Tray 145x170x15mm - Mechanic Stuff

Mechanic Parts Tray 145x170x15mm - Mechanic Stuff It is ideal for storing small parts or screws, for garage, maintenance, or DIY Overall dimensions: 145x170x15mm The model may be imported as a single assembly or grouped object. Before…

Downloads
872
Likes
157
Rating
5
P
Printablesredaeq

Sohle, Einlegesohle, Schuh Erhöhung / Insole, shoe elevation 2,5mm, 5mm, 10mm, 12,5mm, 15mm, 20mm, 25mm, Größe 42

Einlegesohle, Schuh Erhöhung, 2,5mm, 5mm, 10mm, 12,5mm, 15mm, 20mm, 25mm, Größe 42 Gedruckt in TPU, kann natürlich auf andere Größen skaliert werden. ----------- Insole, shoe elevation, 2,5mm, 5mm, 10mm, 12,5mm, 15mm, 20mm, 25mm, size 42…

Downloads
784
Likes
49
Rating
4
P
PrintablesDankof

Grinder drill sharpener 115mm

Description: This is a remixed version of the original drill bit sharpener, redesigned to fit a 115mm diameter grinder. It offers a compact and efficient solution for sharpening your drill bits with ease. Printing Configuration: Material:…

Downloads
680
Likes
112
Rating
5
P
PrintablesLeedle Dynamics

Hardware Free BCAR (For DZ Muzzles or 15mm OD Alu Barrel)

A bit of an experimental BCAR with agressive twisting for sticking inside DZ Muzzles or on the outside of 15MM OD aluminium tube

Downloads
605
Likes
133
Rating
5
P
PrintablesLine Arc Line

15mm Strap Adjuster (Parametric)

This parametric strap adjuster is set to 15mm, but can be adjusted to plenty of sizes by changing the parameters in the Fusion 360 file!

Downloads
599
Likes
74
Rating
5
P
PrintablesZocazola

NR200 Side panel 15mm extension (SEMI-OPEN AIR DESIGN)

This is a work in progress for the NR200- adding a side panel extension that's 3D printable to allow for taller CPU coolers like the NH-D15. Currently my designed clips hold the side panel 15mm out from the side (extending the 153-155mm…

Downloads
578
Likes
35
Rating
4
P
PrintablesDan m

Camera rig feet for 15mm rails

Design allows you to snap them into place without having to de-rig everything. Fits smallrig, but will fit any 15mm rail system where they are 60mm apart. Just added a model that makes the rails sits 0.8 inches higher. Some people that…

Downloads
533
Likes
70
Rating
5
P
PrintablesCazMovi

CazBox - A light weight, Clamp on MatteBox (Now with 15mm rod adapters!)

I was tired of paying a lot of money for a really nice, and light weight Mattebox for a gimbal or steadicam So I made this! Hope you like it, I worked really hard on it. Print instructions Hey friends! I moved this over from Thingiverse…

Downloads
533
Likes
65
Rating
3.5
P
PrintablesMisterChaos

Festival Wristband Clip 15mm

Little contrabtion to make the festival bands reusable without damaging them and having them tight and adjustable.

Downloads
486
Likes
30
Rating
5
P
PrintablesEA3D

Nema 23 Stepper Motor shaft D8 length 41-115mm

Stepper Motor Nema 23 length 41-115mm shaft D8

Downloads
465
Likes
9
Rating
0
P
PrintablesThreeD-Michael

Stackable Jar (115mm version)

Update 2023-12-10: I added a nice 3-fold stand to this storage system. It has the same bayonet closure as the jars, so that they stand securely. Please download here . This is the 115mm jar of my new “ Stackable Jars ” storage system. You…

Downloads
462
Likes
223
Rating
5
P
PrintablesKexana

SUBSTR system 15mm Ball-Hinge-Ball (BHB) joint

This is a 15mm Ball-Hinge-Ball joint for use in the Substratum figure building system I will be utilize in my projects. It should be simple enough to print but the dowel might be a bit hard to insert at first, this is in order for the…

Downloads
462
Likes
20
Rating
0
P
Printables3D Galaxy

BOLT AND NUT M3x15mm

Bolt 3 metric, star, thor, torx, nut, plain Bolt 3 metric, star, thor, torx, nut, plain. Lenght: 15mm Diameter: 3mm

Downloads
409
Likes
21
Rating
0
P
PrintablesMuffelkraft

Customizable M20 Cable Glands, Inserts, Plug and Gasket (12 & 15mm ID)

Complete set of M20 cable glands for 12mm and 15mm inner diameters, including 2-7-wire inserts (1.5mm² & 2.5mm² versions), reducing inserts (3-13mm) and a gasket for reliable sealing. Also includes an M20 plug compatible with the gasket…

Downloads
392
Likes
37
Rating
5
P
PrintablesMiller Bro

1/100 scale (15mm) low detail Buildings

I needed some quick and easy buildings to play Gale Force 9s Tanks:Modern Age So I modded a few of my 1/285scale buildings and one of my 1/48scale buildings and these are the result Edit:2019-07-09 - Thickened walls on Small 3 level…

Downloads
388
Likes
29
Rating
5
P
Printablesflegne

Pegstr - Pegboard Wizard for 15mm/4mm boards

Remix of the amazing Pegstr - Pegboard Wizard by mgx for use with pegboards with 4mm holes, 15mm spacing between holes (measured from middle of the holes or 11mm from edge to edge). In my case the board was just 2,5mm thick, but you can…

Downloads
373
Likes
66
Rating
5
P
Printablesmetalsepp

RadiusGauge v2 01-15mm

Das ist der Nachfolger (v2) meiner Radiuslehre 01-14mm. Das Problem dass keine 90 Grad Ecken gemessen werden konnten, wurde hier behoben. Die Daten sind für den Druck mit einer .4mm Düse und einer Schichthöhe von .2mm optimiert.

Downloads
371
Likes
19
Rating
5

ADXL Nozzle Mount 15mm

Nozzle Mount Adapter for an ADXL with 15mm hole distance. BOM: (3mm holes in bottom plate) 2 M3 Heat Inserts 1 M2 Heat Insert 1 M2 Screw BOM: (2mm holes in bottom plate) 3 M2 Heat Insert 1 M2 Screw

Downloads
354
Likes
57
Rating
5
P
PrintablesHeXeH

Skadis Hook 115mm - NA Skadis

A little fix to the original model to work with North American Skadis boards. For some reason the original model was set to 5.2mm width which would not fit the Skadis without adjusting it. This model is sized correctly for the North…

Downloads
337
Likes
50
Rating
4.5
P
Printablesonektd

Dell Optiplex Micro 15mm HDD Caddy

The factory HDD caddy for the Dell OptiPlex 9020 Micro only fits a 9mm drive. This is a custom version designed to fit a 15mm drive. I’m reuploading this to Printables so more people can find it, as it took me three hours to discover that…

Downloads
324
Likes
31
Rating
4
P
PrintablesJoe

Caliper gauge for Mitutoyo Digital Absolute 15mm IP67 (Tiefenmesser)

Extension for Mitutoyo caliper gauge (Tiefenmesser) made for MITUTOYO Digital Absolute 150 mm IP67 Input / idea came from @jackenhack but this 3D model does not fit to mine Mitutoyo caliper gauge, so I need to redesign the full model new.…

Downloads
315
Likes
59
Rating
5
P
Printablesingegneredentro

115mm Angle grinder dust cover Bosch GWS

115mm Angle grinder dust cover Bosch GWS

Downloads
306
Likes
69
Rating
5
P
PrintablesEd Yu

Extra tall Lack riser 215mm

There are holes for screws but I found they aren't needed at all.

Downloads
304
Likes
86
Rating
5
P
PrintablesSvUltreia

Large (Two Part) Storage Crates (360mm x 215mm x 50/90mm)

I needed storage crates for a specific cabinet which were larger than my Bambu build area (250x250mm). This crate prints in 2 large pieces which are joined by 4 pegs. The base has a small interlocking bevel to seal the gap and add minor…

Downloads
302
Likes
61
Rating
0
P
PrintablesDockGuy

USA 3-hole | 15mm | RC3 | ear flare | face shield

A remix of Prusa's RC3 face shield with: USA 4.25" 3-hole punch spacing (1/4" or 6mm holes) 15mm z-height (quicker print with minimal impact on durability) improved comfort near ears via 7.5° flare filets instead of chamfers to reduce…

Downloads
276
Likes
0
Rating
0
P
PrintablesMateusz Tokarz

Micro Pipe & Tube Clips | 8-15mm (M3)

BOM: Printed with ROSA3D High Speed PLA Gray This "Micro" set completes the collection, offering mounting solutions for very small diameter tubes. These are perfect for organizing small copper pipes (gas/hydraulic lines), PTFE tubes for…

Downloads
273
Likes
77
Rating
5
P
Printablescsants

Soporte para varilla de cortina de 15mm de diámetro

Soporte para sujertar la varilla de cortina de 15mm de diámetro

Downloads
273
Likes
19
Rating
0
P
PrintablesAlex

SpeedyBee Mario 5 GPS Mount for 15x15mm GPS module such as HGLRC M100 MINI

This remixed part will serve as a replacement for the stock GoPro mount in order to provide a location for mounting 15x15 mm HGLRC M100-MINI GPS module on a SpeedyBee Mario 5 frame.

Downloads
269
Likes
20
Rating
5
P
Printablesnfbr

Whale 15mm PEX Pipe Clip / Clamp

Screw clamp for Whale Marine water pipes. Takes larger screw than genuine clamp.

Downloads
267
Likes
18
Rating
4.67
P
PrintablesLucianociri

Escuadras de Ensamble en T y X para Muebles de Melamina de 15mm

[EN] You can find the description in English below [ES] Escuadras de Ensamble en X y T para Melamina de 15mm Estas escuadras de ensamble en X y T son la solución perfecta para quienes trabajan con melamina de 15mm, proporcionando una…

Downloads
262
Likes
23
Rating
0
P
PrintablesMinimayhem

Pipe clamp for 15mm copper pipe

I needed a clamp for my filament dry box setup. For use with 15mm copper pipe. Stops the filament spools from moving. requires M3x8mm cap head screw

Downloads
255
Likes
32
Rating
5
P
PrintablesStandardPickle

115mm Angle grinder and accessories wall/pegboard mount

Made for my Ryobi 115mm cordless angle grinder but I imagine it should work with most 115mm or smaller grinders. I've also made extra parts to hold the handle and the wrench. All parts mounted with 10G x 30mm wood screws into standard…

Downloads
250
Likes
33
Rating
4.5
P
PrintablesFelte

Small Dual Rotary Encoder for EC11 15mm (G1000 and other Panels)

This is a smaller version of Dual Rotary Encoder from FlightSimMaker. EC11 15mm round shaft. Update 2021-12-11: Added CRS Knob Added new Knobs with more details (V2) Added new Case with mounts (V2) Print Settings Printer Brand: Prusa…

Downloads
245
Likes
28
Rating
0
P
PrintablesElValen

Clipper Guard wahl 2 ¼ - 57.15mm

Modelo de un clipper guard para maquinas wahl que te deja a 57.15mm o 2 ¼ in

Downloads
242
Likes
15
Rating
0

Sanding block - Large 115mm / 4.5in width

What is it? Sanding block with a 115 mm width to match common sand paper roll sizes. It has two knobs to easily release a sand paper for quick replacement. Holding a large block on it's own might not be as comfortable so it has a handle…

Downloads
241
Likes
56
Rating
5
P
PrintablesRandomShape

Plant pots - 115mm and 95mm

115mm and 95mm plant pots

Downloads
241
Likes
62
Rating
0
P
PrintablesGodnamedThor

Anglegrinder holder, 115mm for modular wallmount

Anglegrinder holder for the modular wallmount. 2 pieces, you'll need m4x15 screws to put it together. Baseplate and description: https://www.printables.com/model/202771-modular-wallmount-system-for-various-powertools

Downloads
239
Likes
39
Rating
0
P
PrintablesDockGuy

15mm thin | USA 3-hole | ear flares for comfort

A remix of Prusa's RC3 USA 3-post face shield with: 15mm z-height vs 20mm for Prusa's (quicker print and 25% less material with minimal impact on durability) improved comfort near ears via 7.5° flare filets instead of chamfers to reduce…

Downloads
239
Likes
1
Rating
0
P
PrintablesMario Alvarez

HSW large shelf of 200 x 115mm.

large shelf of 200 x 115mm. for honeycomb wall

Downloads
238
Likes
45
Rating
5
P
PrintablesVon_Bednar

Coupris Kineema (Disco Elysium 1-100 / 15mm scale)

Coupris Kineema from Disco Elysium . Based on the concept art and the in-game model, then simplified a bit to make printing easier. I am using it as wargaming terrain, but I think the model is detailed enough to work for dioramas as well.…

Downloads
237
Likes
24
Rating
5
P
Printableszaventh

Ventilator (CPAP) Hose Reducer Adapter 15mm x 22mm

This 3D printable model is a reducing adapter designed to seamlessly connect ventilator circuits, such as CPAP hoses, with different diameter requirements. It allows for the adaptation between adult and pediatric hose sizes, featuring a…

Downloads
227
Likes
20
Rating
5
P
Printablesseb111425

Milwaukee M12 Battery Holder Pegboard 15mm grid

Milwaukee M12 Battery Holder Pegboard 15mm grid (center to center).

Downloads
222
Likes
28
Rating
5

IKEA Metod Leg Clip (15mm and 30mm extended) REMIX

15mm and 30mm extension if you need to bring the Kickboard/plinth more forward

Downloads
220
Likes
11
Rating
5
P
PrintablesFishGee

M6 bolt 50mm overall, 15mm threads

I printed this to use in building the Digital Sundial, http://www.thingiverse.com/thing:1068443 Customized version of http://www.thingiverse.com/thing:193647 Created with Customizer!…

Downloads
220
Likes
9
Rating
5
P
PrintablesBloodyT

Pipe Clamp 15mm Schneider AIRnet, Rohrschelle, Quick Schelle

15mm Clamps for the pneumatic pipe system from Schneider AIRNet

Downloads
220
Likes
21
Rating
5
Downloads
219
Likes
18
Rating
5
P
PrintablesEthan Matthews

HSW magnet mount - 15mm magnet

Honeycomb HSW section that fits a single 15x2mm or 15x3mm magnet. Use to mount HSW on any metal surface or use to mount metal items on your HSW. Print flat side down for best results. Depending on how heavy the items you are storing are…

Downloads
219
Likes
48
Rating
4.67
P
PrintablesChevdor

125x15mm tube printed as vase for Z axis test on high parts

This model will print in 33 minutes. It allow testing your z-axis for wobble on a 125mm tall part. It will also challenge you bed adhesion but should print without any issue if your printer works fine.

Downloads
217
Likes
9
Rating
0
P
PrintablesFormative3D

DJI Lidar Unit 15mm Rod Mount

15mm Rod mount for the DJI Focus Pro Lidar Mount. Uses 2 M5 Nuts, 2 M5 Screws, and the screws needed to mount the Lidar Sensor. Once you've printed the 2 parts, insert the M5 nuts in the recess, then slide the top of the bracket over (you…

Downloads
210
Likes
7
Rating
0

Fingerzinken Schablone 15mm

Schablone zum fräsen von Fingerzinken mit 15mm. Für bretter bis zu einer Stärke von 30mm Wer weiß, wofür man dieses Werkzeug braucht, weiß auch wie man es benutzt, desshalb hier keine Erklärung : ).

Downloads
209
Likes
7
Rating
0
P
PrintablesNicerSlicer

Gardena Micro-Drip Irrigation 0.5 inch (15mm) clamp stake

Gardena Micro-Drip Irrigation 0.5 inch (15mm) clamp stake

Downloads
205
Likes
25
Rating
5
P
Printablesimperatordavus

15mm Prusa Protective Face Shield - RC3 - Comfort Edition

I remixed the original Prusa RC3 headband to make it only 15mm tall and I also flared out the tips to improve comfort. Having tried on the RC3 headband, the ends always put too much pressure against my head. I found out that by spreading…

Downloads
202
Likes
0
Rating
0
P
PrintablesGrandCedre

Super tight 15mm to 19mm adapter

I've tried other 15mm to 19mm adapter and they usually work well. But I had a problem once with the adapter being a little bit to lose so I made my own with no tolerance. the inner diameter is exactly 15mm and the outer diameter is…

Downloads
200
Likes
22
Rating
0
P
PrintablesSkyfinder84

Face Shield A4 sheet 15mm Fabric Band (Block Version)

ENGLISH VERSION AFTER Questa è una versione in foglio di acetato A4 (verticale e orizzontale), con 3 asole di AUTO BLOCCO per fascia elastica da cucito di altezza 15 mm. Suggerisco versione orizzontale per Infermieri e Medici che…

Downloads
200
Likes
0
Rating
0
P
PrintablesBrokenPoet

REV Robotics 15mm Extrusion

This is an approximation of the REV Robotics 15mm extrusion. It was created to support build activities of FIRST FTC Team #13599 Bruinbots for their 2018 season. The OpenSCAD file is attached for your use and improvement. There are pieces…

Downloads
195
Likes
3
Rating
0
P
PrintablesWillyCKH

Cable Zip Tie Mount 15x15mm

Cable Zip Tie Mount 15x15mm To install, you may add double-sided tape or glue to the bottom, and then attach the cable with zip tie. This model doesn't require support to print.

Downloads
195
Likes
18
Rating
0
P
Printablesvismakan

60x60x15mm fan blades replacement

0.1mm layer height. infill 20%. outside diameter 56mm, inside diameter 30mm, diameter for axle 2mm.

Downloads
190
Likes
17
Rating
0
P
Printablesseb111425

Combo Wrench Holder Pegboard 15mm grid (screw version) (e.g. Proxxon Set)

Combo Wrench Holder Pegboard 15mm grid (screw version) (e.g. Proxxon Set) I adapted it to a 15mm Pegboard grid with 6.5mm holes for 6mm screws. I cut 6mm threads into the 5mm holes to use 6mm metric screws.

Downloads
188
Likes
22
Rating
0
P
Printablesjoshua.camera

CAM TO 15MM ROD CLIP

Easy to print cable holder for the cleanest of camera builds. Cheers!

Downloads
188
Likes
28
Rating
0

Rainwater tank overflow to 15mm garden hose

This is a remix of Rain barrell overflow 1'' hose adaptor (by Toqisek ) and Hose Connector / Adapter Set - Gardena (R) Quick-Connect Compatible, 3/4" Faucets, and 1/2" Hoses (by guppyk ), both on Thingiverse (Printables doesn't let me use…

Downloads
186
Likes
24
Rating
5

Niimbot Label Case (12-15mm or 25mm wide)

Niimbot label cases for 25mm and 12-15mm wide tapes.

Downloads
182
Likes
34
Rating
5
P
PrintablesDirk

15mm copper pipe clamp saddle

15mm copper pipe clamp saddle. PETG 0.20mm 25% infill. Created with FreeCAD.

Downloads
178
Likes
29
Rating
5
P
Printablestrippledigitss

15mm Prusa USA 3 Hole Version Stack - No Supports

Reduced height to 15mm and added stacked .stl file with no support so users can generate their own support when slicing. Print instructions Printed on a Creality CR10S Pro with 1.75mm Botfeeder PLA on the following settings for Cura…

Downloads
175
Likes
0
Rating
0
P
Printablesbenihanaz

18x 2.5" HDD/SSD Storage (15mm drives) - Thingverse Remix

I needed a HDD/SSD holder to hold the max drives I could fill on the Prusa Mini print plate, so remixed this Fits 15mm drives

Downloads
171
Likes
21
Rating
5
P
Printablesseb111425

Milwaukee M12 Charger Pegboard Mount 15mm grid

Milwaukee M12 Charger Pegboard Mount for a 15mm grid

Downloads
168
Likes
18
Rating
0
P
PrintablesR Wheeler

akro-mils bins wall hanger rail 315mm

Works for akro-mils and other like bins.

Downloads
168
Likes
10
Rating
0
P
PrintablesMarko118

Pegboard hooks for 15mm Pegboards

I printed in petg , flat side down, working well on 15mm square pegboard.

Downloads
166
Likes
17
Rating
0
P
PrintablesDuckMeat

Minisforum MS-01 Case Extension - To Fit Larger 15mm SSD

Backstory: I ordered a datacenter Intel U.2 SSD before receiving my MS-01, only to realize once it got here that it didn't fit, with the ms-01 only supporting 7.5mm drives. I'm by no means a professional CAD designer and would like to see…

Downloads
161
Likes
20
Rating
0
P
Printablesimperatordavus

15mm Prusa Protective Face Shield - RC3

15mm Tall Version of the RC3 headband. I even found a chamfer that Prusa missed on the bottom of the headband.

Downloads
160
Likes
0
Rating
0
P
PrintablesCMcDonald04

Lens hood for Panasonic Lumix Leica 15mm 1.7 Summilux H-X015

I was having difficulty finding a replacement lens hood so I put one together in Design Spark. This hood will work with the Panasonic Lumix Leica 15mm 1.7 or the DJI white-labelled version. Printed solid at 0.2mm layer height, 0.4 nozzle…

Downloads
160
Likes
16
Rating
5
P
PrintablesKN16

Three 15mm Screamer/Bird Banger to 37mm Adapter

This lets you fire the 15mm flares or scare cartridges (screamer, whistle, banger etc) from a 37mm launcher simultaneously. there is a slot for a rubber band that will hold them in place so they don't all fall out if tipped. you simply…

Downloads
159
Likes
23
Rating
0
P
PrintablesTS L

PCO-1881 Bottle to Hose Adapter (15mm Barb)

A 3D printable adapter that connects standard soda bottles (PCO-1881 threads) to 1/2" (15mm) hose barbs. This adapter screws onto standard plastic bottles (like soda bottles) and provides a hose barb connection for tubing. Perfect for DIY…

Downloads
156
Likes
10
Rating
5
P
Printablesrandy_s

Narrow Drawer Silverware organizer (215mmor ~8 7/16")

Very simple model, I just made a series of boxes and slid them around until they matched my measured dimensions on the silverware. The Right-most area is left open at the top for longer items. There are a couple mm to spare on the sides,…

Downloads
154
Likes
13
Rating
0
P
PrintablesDefenderBob

covid_19_headband_rc3_15mm_4pcs

Took the stack that was uploaded (THANKS MUCH!) and cleaned the text, split the bodies to 15mm and recombined. This is next on my printer queue, but looking at the layers in Cura, it seems OK. Shout-out to this community for being…

Downloads
153
Likes
0
Rating
0

tool for sandpaper 15mm

filament: PLA height layer: 0.2 speed: 120mm/s

Downloads
153
Likes
18
Rating
4
P
PrintablesMiller Bro

1/100 (15mm) AVGP Cougar Grizzly

I needed some quick Canadian Forces tanks in 15mm 1/100 scale so whipped these up- enjoy 2019-06-25- fixed slight turret distortion (it was a bit too squat lol) Print instructions Unassociated tags: 1/100 Category: Vehicles

Downloads
151
Likes
12
Rating
0
P
Printablesjattie

Small Wiring Junction box 22x15mm

Small Wiring Junction box 22x15mm to fit 2.5A terminal strip with two connections.

Downloads
151
Likes
12
Rating
0
P
Printableslual

End cap for cable duct 30x15mm

Optimized for FDM printing. The retaining clips are unbreakable and have a slightly elastic shape.

Downloads
149
Likes
14
Rating
5
P
PrintablesJacco

DJI Lidar to 15mm rods attachment.

I wanted the lidar unit of a DJI focus pro set underneed just in front of the matte box of my video rig. For a 15mm rod rig. With 60mm spacing between rods. (Smallrig shoulder rig for example) Uses m3 hardware: 2x bolt, nut and washer.…

Downloads
147
Likes
5
Rating
0
P
PrintablesBoopidoo

Pan & Tilt 15x15mm Camera

A pan and tilt for 15x15 camera. Tilt servo is 4.3g and pan servo can either be 4.3g or 9g. Servo arms to be glued into the arms. Camera can be mounted on either side of the servo, use MIR files for other side. Can be printed without…

Downloads
147
Likes
32
Rating
0