Search results: 241

Sort order

242 models

P
PrintablesOpenscaddad

Raspberry Pi Bracket for Dell U2412Mb Monitor

In the early 2000s, Dell made a series of monitors that had an optional sound bar powered by a 24w, 12v barrel jack. These monitors also functioned as a USB hub. Pictured is the back of a U2412Mb monitor and a 3D printed bracket that…

Print approx. €2.64–€3.23 excl. taxPreliminary estimate for one variant

Downloads
17
Likes
4
Rating
0
P
PrintablesSTVS_Christos

Tray for the 19" Moduler tray system, compatible with WAGO 221-2411

This is a tray, for use with Robert_28442s modular tray system . The concept is simple: Why not utilize WAGO clamps in a 19" non-DIN rack environment? For rack builds, who want to utilize WAGO 221-2411 clamps, either without din rails or…

Print approx. €0.80–€0.98 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
15
Likes
9
Rating
0
P
PrintablesF Engineering

ISO 7000-2416 protection against chain saw

EN: To indicate that the clothing or material provides protection against chain saws. DE: Hinweis darauf, dass die Kleidung oder das Material gegen Kettensägen schützt.

Print approx. €0.17–€0.20 excl. taxPreliminary estimate for one variant

Downloads
7
Likes
1
Rating
0
P
Printablesmaggoh

Presence Sensor Case - ESP32 C3 Super Mini + LD2410C Radar mmWave Sensor for smart home

Update 1: Small optimizations to the casing Added a small groove for lifting the lid Added some space inside on the back for potential cables Hello, here's a small project that I designed. I wanted to combine a small ESP32-C3 Super Mini…

Downloads
2,376
Likes
244
Rating
5
P
PrintablesDesigner

NACA Airfoils (10 Models available including NACA-2412!)

Can be used for DIY RC Airplanes, education and more. If you want other models of NACA airfoils, feel free to comment. Included models; NACA-0012 NACA-0015 NACA-1812 NACA-2212 NACA-2312 NACA-2408 NACA-2412 NACA-4412 NACA-5416 NACA-7712

Downloads
2,350
Likes
34
Rating
5
P
PrintablesTheProjectWheel

Case for ESP32-C3 SuperMini and LD2410C

Please comment, rate, and post a make! Update 2/1/2024: I've added a new back with a ball joint to give better flexibility with printing a single back for multiple mounting options. A simple case for using an LD2410C radar sensors with an…

Downloads
2,328
Likes
273
Rating
5
P
PrintablesSeth

NACA 2412 Airfoil

NACA Airfoil 2412. I use this for a test print for new materials or different settings. Uses surprisingly little filament for its size. Print instructions Suggested settings: one perimeter zero top and bottom layers gyroid infill 15%

Downloads
1,609
Likes
19
Rating
5
P
Printablesp2baron

Case for LD2410 radar module and D1 Mini

Case to hold a LD2410 MMWAVE sensor module and a Wemos D1 mini board. The radar module can be rotated horizontally to adjust the angle and direction it is sensing. Four parts: The case that holds everything A holder for the radar module.…

Downloads
1,171
Likes
95
Rating
4.78
P
Printablesthall72

Lego Compatible (2412b.dat) Tile 1 x 2 Grille with Groove

This model is compatible with the lego system.

Downloads
967
Likes
54
Rating
5
P
PrintablesJack Ormston

DIN Rail Clip for WAGO 221-2411 Inline Connector

Model for mounting 3x WAGO 221-2411 Inline Connector to standard DIN rail. Best printed on side for strength.

Downloads
962
Likes
136
Rating
5
P
PrintablesTheProjectWheel

Case for ESP32 S2 Mini and LD2410C

Please comment, rate, and post a make! Update 1/19/2024: I've added a new back with a ball joint to give better flexibility with printing a single back for multiple mounting options. A simple case for using an LD2410C radar sensors with…

Downloads
888
Likes
106
Rating
4.75
P
PrintablesLomax1983

Junction Box (WAGO 221-2241)

WAGO 3-way junction box. Suitable for 3-wire cables with a maximum cross-section of 1 mm². The cover is attached to the box using four thermal inserts with M2 threads. The screws require 5 mm.

Downloads
679
Likes
55
Rating
0
P
PrintablesHenne

WAGO 221-2411 DIN Rail Holder

Update: Die 3er Variante wurde hinzugefügt. Update: Die 4er und 5er Varianten waren fehlerhaft und wurden nun korrigiert. Update: Ich habe noch eine 5er Variante hinzugefügt. Update: Ich habe noch eine 4er Variante hinzugefügt. Ein…

Downloads
666
Likes
98
Rating
5
P
Printablesdjc3d

esp32-wroom case - Temp and mmWave - DHT11 LD2410

Spliced together a few different files to fit my own requirements. You may need to re-size/check the carrier dimensions depending on your own ESP32 board. I designed this to use with Jumper cables, i didn't have a screw for the DHT sensor…

Downloads
594
Likes
48
Rating
3.5
P
PrintablesBeusekomse Baan

Nederlandse Spoorwegen 2412 - Spoor 1 / 1:32

After the second world war Alsthom (still with the letter “H” in the name) build 130 diesel electric locomotives for the Nederlandse Spoorwegen (Dutch state railways). They were based on a standard for locomotives in France and the French…

Downloads
585
Likes
44
Rating
4
P
PrintablesBri0nac

ESPHome Sensor - D1 Mini ESP8266 USBC and LD2410 case

This case has slight changes to it and is based off of Digital Juice 's. This update fits the LD2410 with or without dupont wiring and the USB C version of the D1 mini ESP8266. I included a text file of the .yaml file that is working for…

Downloads
579
Likes
63
Rating
4.5
P
Printablespatrickf

Case for HLK-LD2410C mmWave and D1 Mini

Case for HLK-LD2410C mmWave & D1 mini ESP8266 to be added in a room or to be put on a wall. Material used for printing: PETG

Downloads
500
Likes
35
Rating
4.67
P
PrintablesDigital Juice

LD2410 human protector

The model has multiple axes of rotation and is quick to assemble. You can also remove unnecessary parts of the fastening mechanism! This model additionally uses 8x3 magnets and 2x8 bolts. The software can be found on this page :…

Downloads
496
Likes
66
Rating
0
P
Printablesthall72

Lego Compatible (2417.dat) Plant Leaves 6 x 5

This model is compatible with the lego system.

Downloads
412
Likes
48
Rating
5
P
PrintablesNozzle

Wago 221 2411 Durchgangsverbinder Dose 3 Polig

Eine Verbindungsdose zum Verschrauben für 3 Stück Wago 221 2411 Durchgangsverbinder. Die Zugentlastung erfolgt mittels Kabelbinder. Kabel Durchmesser ca. 9mm Das Gehäuse ist anschraubbar und der Deckel kann mit M3er Schrauben oder 3mm…

Downloads
407
Likes
50
Rating
5
P
PrintablesaRoman02

NACA-2412 wing with working flap

This wing is fully functional, it was made out with the NACA-2412 airfoil, the same used in the cessna 172, the flap, extends and retracts as in the real life passenger airplanes. It can be done fully 3d printed, but the weight would be…

Downloads
383
Likes
38
Rating
0
P
PrintablesDanuvius

LD2410C Case d1_mini/esp32_d1_mini

I needed a Case for the LD2410C which fits a d1 mini or esp32 d1 mini, so i designed this one.

Downloads
381
Likes
30
Rating
4.67
P
Printablesnumo

Wago 221-2411 Clip

The Wago 221-2411 is a popular spring clamp splice, perfect for quickly connecting e.g. the LED bar or fans on the top of an enclosure to the power supply in the bottom. The model provides a way to clip multiple instances together. If you…

Downloads
372
Likes
46
Rating
0
P
PrintablesFerelArg
Downloads
364
Likes
37
Rating
4
P
PrintablesIvanov design

Cabin filter cover Renault Laguna 3 52410566

Wip. Replacement for cabin filter cover Renault Laguna 3 52410566. Please notify me in the comments about inconsistencies. Print Settings Printer Brand: Tronxy Printer: Tronxy X5SA/X5ST/Pro/2E/D01 Plus Rafts: No Supports: Yes Resolution:…

Downloads
350
Likes
25
Rating
0
P
Printableslfpoulain

Boitier pour détecteur de présence - Wemos S2 mini - LD2410c

Ce projet DIY est non seulement accessible et économique (coût total d'environ 7€), mais il est également personnalisable pour s'adapter à divers scénarios de domotique. Que ce soit pour allumer les lumières en fonction de la présence ou…

Downloads
341
Likes
34
Rating
5
P
PrintablesBrian Shen

LD2410C + ESP32-C3 Case - Larger USB-C cable

No supports needed. Model in picture printed on Prusa MINI with PLA.

Downloads
334
Likes
23
Rating
0
P
PrintablesNozzle

Wago 221 2411 Durchgangsverbinder Dose 2 Polig

Eine Verbindungsdose zum Verschrauben für 2 Stück Wago 221 2411 Durchgangsverbinder. Die Zugentlastung erfolgt mittels Kabelbinder. Eine Seite für Kabel Durchmesser 9mm , die andere für Kabel 4x6mm.

Downloads
332
Likes
55
Rating
5
P
Printablesthall72
Downloads
323
Likes
54
Rating
0
P
PrintablesDigital Juice

LD2410 case

The firmware can be found on the official website esphome

Downloads
316
Likes
44
Rating
5
P
PrintablesGulpman

Universal LD2410B sensor snap fit case

I was in search for a case for the popular LD2410B radar presence sensor. However, non of the versions I could find matched what I was looking for. I had LD2410Bs with and without headers here. I also ordered different USB-C breakout…

Downloads
316
Likes
20
Rating
0
P
PrintablesCaleb Blair

Hueforge - Godzilla Minus One Movie Poster (160X241)

1st test print with these settings, I think you can get away from the Agua Blue, didn't really add too much to the print. Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PLA PolyLite Azure…

Downloads
316
Likes
83
Rating
0
P
PrintablesPhantom

LD2410C + ESP32 or ESP8266

Human presence sensor housing, could not find any casing for the older ESP 8266, this is my first design so, feedback are welcomed Printed with a 0.2 resolution. Use 4 wall layers if to avoid infills on the lid. Screws needed: 2x 25mm M3…

Downloads
313
Likes
44
Rating
4.5
P
Printablesthall72

Lego Compatible (11241.dat) Duplo Compatible Horse Baby Foal Pony

This model is compatible with the lego system.

Downloads
297
Likes
50
Rating
1
P
PrintablesHans

Easy Compact Radar Presence Sensor - LD2412 And D1 Mini Esp32 Wall Case (EspHome)

A wall mount radar presence sensor with a LD2412 that gets directly attached to the Wemos D1 Mini Esp32. EspHome and Home Assistant recommended. Fitting yaml is provided as txt (restriction from printables). Instructions: bend the pins of…

Downloads
278
Likes
34
Rating
5
P
PrintablesMKprints

Vesa Mount Adapter for Acer R241Y

This is a low profile VESA mount adapter for the Acer R241Y. The adapter is strong enough to hold the monitor in both landscape and portrait mode. The tougher filament you use the better but even PLA perfoms well and without deformation.…

Downloads
278
Likes
7
Rating
5
P
PrintablesGabriel

LD2410B ESP32-C3 SuperMini Case

Case for a LD2410B combined with a ESP32-C3 SuperMini. No supports required.

Downloads
260
Likes
24
Rating
4.67
P
Printablessabin

Radar dish support for HLK-LD2410C motion sensor mmW 24GHz

Radar dish support for HLK-LD2410C motion sensor mmW 24GHz. Printed with 0.4 nozzle, PLA, with organic supports.

Downloads
249
Likes
18
Rating
0
P
Printablesjustinsmonty

ESPHome Presence Sensor - D1 Mini & LD2410

Case designed to fit following components from Aliexpress. There are many clones and alternatives out there with very slightly different dimensions. WeMos D1 Mini ESP8266 ESP-12F WIFI HLK-LD2410 LD2410 24G FMCW 24GHz *12/26 - updated…

Downloads
235
Likes
24
Rating
0
P
Printablesthall72

Lego Compatible (2419.dat) Plate 3 x 6 without Corners

This model is compatible with the lego system.

Downloads
234
Likes
20
Rating
0
P
PrintablesDanuvius

LD2410C Case (including angled version)

In this case fits only a LD2410C, see the pictures. This is meant for bluetooth use case. So if you are integrating this sensor over bluetooth to Home Assistant or any other Home Automation Software, this Case fits perfectly.

Downloads
233
Likes
17
Rating
0
P
Printablesgapx

WX-DC2412 Enclosure - Box - Case - XT60 - IEC320 C14 - Fan 40x40x10mm

Eclosure for WX-2412 24V power supply board. It was designed with 3D printing mentality. No supports needed. CAD files included. Features: -The 40mm air intake fan -XT60 connector for DC output -IEC320 C14 socket for AC input -Easy…

Downloads
232
Likes
16
Rating
0
P
Printablesrem

LD2412 with ESP32 C3 Super Mini - presence sensor case

Sensor housing for the esp32 super mini c3. I printed on PLA and the lid is a snap in design (though feel free to modify to use screw posts). The ESP sits very snuggly in the case - so you'll want good tollerances.

Downloads
230
Likes
19
Rating
0
P
PrintablesKemmotar

Fridge shelf for Frigidaire 241691311

This is a replacement shelf for a Frigidaire 241691311 refrigerator. It goes on the upper section of the door. The shelves that come with this refrigerator are an extremely poor design, and break almost immediately if you put any weight…

Downloads
230
Likes
31
Rating
0
P
PrintablesAlin

SVBONY SV241 Cable Management

Snug fit printed flat on a Prusa Mini on 0.2mm speed profile PETG - 100% infill about 30-35min print time. EDIT: I have added a tall version of the Cable Management. I have not tested it, print at own risk.

Downloads
228
Likes
14
Rating
5
P
PrintablesOfilant

WAGO 221 2411 clip with screwholes

WAGO 221-2411 clip, screwable (M3, 10mm distance in both directions), connectors (not to) easy to push out and push in, 1 to 8 connectors, created with onshape . No supports needed, printed with PLA

Downloads
223
Likes
22
Rating
0
P
PrintablesOV1A

WAGO 221-2411 plate mount

Material: PETG Material : PETG Resolution : 0.15mm Infill : 100% Printed with brim for better adhesion. Place M3 nut in holder. Cut plate according to scheme.

Downloads
222
Likes
44
Rating
0
P
Printablesjpoles1

CNC 2418/3018 4th Axis and Ring Engraving Mandrel

This design uses a standard NEMA17 stepper motor as a 4th axis for a standard CNC 2418/3018. A custom deisgned mandrel serves to hold a ring in place while a standard 30 degree V-engraving bit is used to engrave soft metals such as brass.…

Downloads
220
Likes
60
Rating
0
P
PrintablesChrisCampbell

D1 Mini + LD2410 mmWave Sensor Case

Case to house LD2410 and D1 Mini. Printed in PLA, no supports.

Downloads
220
Likes
18
Rating
5
P
Printablesmateuszhamera

ESPHome Sensor - ESP32-C3 super mini and LD2410 case

This case is based off of Digital Juice's. This update fits the LD2410 and ESP32 C3 super mini from Aliexpress.

Downloads
218
Likes
21
Rating
0
P
PrintablesSimon Watts

Svbony SV241 powerbox finder foot

A finder foot for the Svbony SV241 Powerbox, allowing you to attached to a finder shoe on your telescope. I used two M4 10mm button head screws to attach to the Powerbox.

Downloads
213
Likes
15
Rating
5
P
PrintablesMR H

D1mini Sensor Case - LD2410C, BH1750

I Modified the project to be able to store a LD2410C instead of the temp sensor. Also i opened part of the top case for the light sensor, as the measurements were pretty low. There is plenity of space for the cables, so you should be able…

Downloads
209
Likes
22
Rating
5
P
PrintablesSvensson2584

Wago 221-2411 Connector for 2/4/6/8

Hi, a friend was in need to connect some wires for a project of his. I found the model of ‘Jemand/Joschas’ and it fitted his needs. We just needed a version for 6 wago 221-2411 clips in one piece and a base size of 52 mm x 39 mm for…

Downloads
208
Likes
26
Rating
5
P
PrintablesPrashant Sinha

Radar Presence Sensor with IR Proxy ( LD2410 (C)) and Tilt Mount

This Radar Presence Sensor is easy to build and pretty cheap considering its performance. The firmware uses ESPHome . The sensor uses the universal ball-joint design so it can be oriented for accurate detection. I provide a skadis mount…

Downloads
204
Likes
44
Rating
0

Junction box for dynamic number of wago 221 2411 with autoclick lid

Junction box for wago 221 2411. The numbers of connector can be set by changing the value of user parameter [long_connectorn_number]. The hole in the bolt can be changed up to 7mm by modifying the value of user parameter…

Downloads
203
Likes
40
Rating
5
P
PrintablesPhil Cartwright

ESP32 38-Pin LD2410C PIR Multisensor Housing

Yep. It holds an ath20 board, a panasonic PIR, an mmwave radar, and an esp32 of the 38-pin flavor.

Downloads
199
Likes
13
Rating
0
P
Printablesthall72
Downloads
198
Likes
31
Rating
0
P
PrintablesMR H

LD2410C Case

I wanted a case for the LD2410C that i could just plug in a 5V PSU and use it over bluetooth The case allow for the sensor to fit with the pins, but i also uploaded a slim version without the pins When inserting the sensor on the top do…

Downloads
187
Likes
8
Rating
0
P
Printableslogi788

WAGO 221 - 2411 Case V2

Verbindungsgehäuse für Leitungen bis zu 6mm Durchmesser. Der Deckel wird mit dem Gehäuse Zusammengesteckt und die Leitungen können mit Kabelbindern fixiert werden.

Downloads
184
Likes
25
Rating
5
P
PrintablesTronic

Wago 221-2411-Clip

With three and seven connection options

Downloads
181
Likes
22
Rating
0
P
PrintablesHans

Compact Radar Presence Sensor - LD2410C And D1 Mini Esp32 Wall Case (EspHome)

A wall mount radar presence sensor with a LD2410C that gets directly attached to the Wemos D1 Mini Esp32. EspHome and Home Assistant recommended. Fitting yaml is provided as txt (restriction from printables). BOM: D1 mini ESP32 with…

Downloads
173
Likes
18
Rating
0
P
PrintablesTiwo_3d

Corner mount case for HLK-LD2410C-P

WORK in progress Hello, I designed a Case for the mmWaveRadar-sensor HLK-LD2410C-P from Hilink. It's a first version, more a tryout. The sensor is the version with 2.54mm pinout. It's the “friendly” one. You can better solder it, as the…

Downloads
172
Likes
19
Rating
5
P
Printablescalvinbui

ESP32-C3 Super Mini and LD2410

Rectanglar case with snap fit lid and visible sensors

Downloads
166
Likes
25
Rating
0
P
Printablesphilsson

mmWave Case for LD2410

I have designed and printed these cases for personal use in PETG. It can be panned and tilted and has a cutout for the USB cable. Software in my case is ESPHome connected to Home Assistant

Downloads
166
Likes
21
Rating
5
P
Printablestjh71

Case for LD2410 radar with d1 mini esp32

changed internal box to support d1 mini esp32 added a clip to hold down the d1 mini esp32 added a home assistant logo

Downloads
165
Likes
16
Rating
0
P
PrintablesPeter Davis

Gridfinity Shadow Tray- Milwaukee Right Angle Drill 2415-20

My students and I are developing gridfinity shadow trays to organize the tools. Some fit better than others and most of them are setup for a 1in tool pocket depth. There will be more posted soon. Here is a tray for the M12 3/8in Right…

Downloads
162
Likes
51
Rating
5
P
PrintablesMoksh Mridul

LD2410 Magnetic Holder

Printed with PLA+ 20% Infill Supports preferred, based on printer

Downloads
150
Likes
21
Rating
0
P
PrintablesManicResin

Wago 221-2411 Din Rail Clip Mount

Simple, secure, toolless Wago DIN mount clip using Bryan's original design. Install wago from the side with the latch side centered then press the opposite side down and rotate into place. It is a tight fit making the wago very secure…

Downloads
147
Likes
29
Rating
5
P
Printablesthall72

Lego Compatible (29241.dat) Animal Big Cat Body

This model is compatible with the lego system.

Downloads
144
Likes
31
Rating
0
P
PrintablesSaint

Refrigerator Door Bin 241H (LG MAN61844401) for LG LSC27925 Fridge

These are a replacement door bins for LG LSC27925, LSC27937ST fridges, replacing LG part 241H / MAN61844401 / AAP72911202. I printed this on my Sovol SV06 and it took up nearly the entire 220mm x 220mm print bed, so I think you'll need a…

Downloads
144
Likes
16
Rating
0
P
Printablesthall72
Downloads
141
Likes
18
Rating
0
P
PrintablesTuxedo

Gridfinity tray for IWISS IWS-2820M & IWS-2412M crimping tools

Gridfinity compliant, low-profile tray/holder for the IWISS IWS-2820M and the IWS-2412M open barrel terminal crimping tool. I did not completely design it from scratch. I used schenklooza 's excellent Gridfinity Parametric Blank bin as a…

Downloads
137
Likes
21
Rating
5
P
Printablesthall72

Lego Compatible (24199.dat) Animal Dragon Head Jaw Lower with 1 Stud

This model is compatible with the lego system.

Downloads
135
Likes
24
Rating
0
P
Printablesluma

Gridfinity base for OWON XDM1041 and XDM1241 benchtop multimeters

The OWON benchtop meters XDM1041 and XDM1241 are both nice units for benchtop work but could use some gridfinity lovin' so here we are. This model should fit the meter tightly such that it won't just lift out of place. To insert, start…

Downloads
133
Likes
16
Rating
0
P
PrintablesCharles Staton

Drill trigger switch FA2-16/1WEK or Z2S2416

I made this model from physical measurements I took. It is as accurate as my harbor freight digital calipers are. The model is based on FA2-16/1WEK but I have Z2S2416 also, and the only difference is that the heatsink covers more area and…

Downloads
132
Likes
2
Rating
5
P
PrintablesNicolas Lion

Box for LD2410C - ESP32 S2

Box for ESP32-S2 equipped with an LD2410C sensor. Printed with PLA, at 0.4mm, no supports. DIY Project: https://www.nlion.fr/nicolas-lion-informatique-ancenis/2024/02/25/ld2410c/ Category: DIY

Downloads
132
Likes
14
Rating
0
P
PrintablesMiki SP5ME

Mounting for WAGO 221-2411 for connecting into sets

Fits the wago connectors listed below https://www.wago.com/gb/installation-terminal-blocks-and-connectors/inline-splicing-connector-with-levers/p/221-2411

Downloads
131
Likes
16
Rating
5
P

VESA Mount Adapter for Dell S2218, S2318, S2319, S2418, S2419, S2718, S2719 Monitors

I bought Some Dell monitors and used them for some time. Eventually I got a mount, so I could have a 4 monitor setup. These didn't have VESA mounts, so I was looking at replacing all my monitors. I decided to model an adapter to fit on my…

Downloads
130
Likes
9
Rating
0
P
PrintablesTheProjectWheel

HSW Mountable Case for ESP32-C3 SuperMini and LD2410C

Please comment, rate, and post a make! A simple case for using an LD2410C radar sensors with an ESP32 C3 Mini that can be mounted to the HSW. I've included a little spacer that can be slid over the pins of the LD2410C to help with…

Downloads
130
Likes
20
Rating
5
P
PrintablesAlex@APTO

WAGO 221-2411 - multi-level DIN rail mount | Mehrstockklemme DIN-Schiene

(English below) Erweiterbare Mehrstockklemme für Klemmen WAGO 221-2411 zur Montage auf einer 35mm-Hutschiene: Diese Mehrstockklemme besteht aus einem Grundmodul, welches auf einer Hutschiene aufgerastet werden kann, einem Aufsteckmodul,…

Downloads
128
Likes
53
Rating
0
P
Printableskit

HMAS Protector ASR241 / Seahorse Horizon model boat

Into 1:72 scale model radio control ships. Usually we buy 1:72 scale fibreglass hulls from somewhere like APS Models and then scratch build the rest of the ship ourselves (e.g. propellers, motors, servos, radios, deck, superstructure)…

Downloads
127
Likes
6
Rating
0
P
Printablessyrus

D1mini LD2410 Home Assistant case

To print the cover with the logo in two colors change the filament to a different color at layer 4 and 6.

Downloads
120
Likes
18
Rating
0
P
PrintablesMark Berk

LD2410 motion detectors mounting bracket

A series of mounting brackets for a LD2410 motion detector, one for the LD2410B and two for the LD2410C for the LD2410B and LD2410C there is a wall mount, i use it to mount te sensor flush against the wall to person detect on the other…

Downloads
118
Likes
5
Rating
0
P
PrintablesMR H

D1mini Sensor Case - LD2410C, BH1750

Original project: https://www.printables.com/es/model/189821-d1mini-sensor-case-dht22-bh1750 I Modified the project to be able to store a LD2410C instead of the temp sensor. Also i opened part of the top case for the light sensor, as the…

Downloads
113
Likes
10
Rating
5
P
PrintablesDizzyWeb

LD2410C/ESP32 D1 Mini case with tilt mount

Slight remix of the original model by Prashant Sinha . For instructions please see the original model . The only differences are that this model is adapted to use M2 screws, the original model requires M2.5 which I did not have available.…

Downloads
109
Likes
11
Rating
0
P
PrintablesLee David

Sheet label and Printer Holder for Phomemo 241BT

A try to keep labels aligned, help them from being pushed off the desk. Designed to work with the Phomemo 241BT and similar.

Downloads
109
Likes
7
Rating
0
P
PrintablesMurdogk

lego 2877 71752 98283 15533 30136 30137 20310 2412

lego 2877 71752 98283 15533 30136 30137 20310 2412

Downloads
107
Likes
4
Rating
0
P
PrintablesNigeke

MK4S X-axis cable holder (20241223.r01)

Holder for the X-axis cable wrapping; The only one moving one that in the kit stays loose. Recommend to print in ABS and use 2 layer raft

Downloads
105
Likes
26
Rating
5
P
Printablesthall72
Downloads
97
Likes
16
Rating
0
P
PrintablesDSLight

Wago Leitungsverbinder 4x 221-2411

Gehäuse mit Deckel für vier Verbinder 221-2411. Es werden noch zwei M16 Kabelverschraubungen benötigt, sowie 4 Senkkopfschrauen 3x8mm

Downloads
94
Likes
15
Rating
0
P
PrintablesBecquereI

Mounting Bracket for XDM1241/XDM1041

The OWON XDM1241, being a budget bench multimeter, is quite a neat little unit for the hobbyist. Its small form factor certainly is a plus if you don't have a lot of bench space available. The downside of it being such a compact and light…

Downloads
94
Likes
13
Rating
5
P
PrintablesLuca

Support for Mele miniPC and SVBony Power Box SV241

I remixed a Mele miniPC holder to add a support bracket for the new SVBony SV241 mini power box and USB hub. The holder can be mounted on any Vixen/Losmandy/flat bar with 2 M6 holes spaced 20 mm. The Mele miniPC is inserted in the slots…

Downloads
93
Likes
3
Rating
0
P
Printablesdt64

Bottle holder for Thetford N4241 / N4000 fridge - Fusion360 remix

Thanks to @Creo2005_265049 for providing the base with the f3d file. I changed it to fit Thetford N4241 / N4000 caravan fridge. To illustrate the dfference, on the first pic this part is clipped into the N4241 shelf, the original from…

Downloads
91
Likes
9
Rating
5
P
PrintablesSnille

Case for ESP32 C3 Super Mini and LD2410C - Remix

Same size as the original, just added a mounting-option and changes vent holes.

Downloads
89
Likes
18
Rating
0
P
Printablesjonnybergdahl

LD2410B mmWave sensor enclosure

I designed a small enclosure for the HLK-LD2410B-P mmWave sensor bord for use in Home Assistant. More details can be found at https://github.com/jonnybergdahl/Sensor_LD2410B . I have included the Fusion 360 file so you can remix it as…

Downloads
84
Likes
8
Rating
0
P
PrintablesRR

Presence sensor LD2410C + ESP32

Case for ESP32 and LD2410C MMwave sensor. Fits LD2410C and ESP32 with dupont connectors. Use double sided tape or hotglue to mount ESP32. Use M3 25mm for base and lid x2 M3 16mm for arm. x3

Downloads
83
Likes
8
Rating
0
P
PrintablesTheNamesJohn

LD2410 adjustable mount

Hi there, Sharing my little bathroom mirror project, specifically the part with a housing for LD2410 mmWave sensor which then connects to a d1mini controller with ESPHome for automated bathroom mirror ledstrip control. Features easy…

Downloads
82
Likes
8
Rating
0
P
Printablesghost33

Presence Sensor Enclosure Beetle ESP32-C6 & LD2410C

Enclosure for a DF Robot Beetle ESP32-C6 and a LD2410C. The enclosure is a tight fit for the C6 but it fits nicely. You may need to push the USBC male connector from the C6 into the enclosure's USB hole from the outside once or twice at…

Downloads
81
Likes
12
Rating
0