239 models
Haken der die Kofferraumablage an Ort und Stelle hält. Hook which fold the trunk cover in position
Print approx. €2.49–€3.05 excl. taxPreliminary estimate for PETGSource material: PET
Print approx. €5.24–€6.41 excl. taxPreliminary estimate for one variant
A collection of the most common condition, status and effect rings for your D&D and PF gaming table. Sized to fit around medium bases or hang over larger miniatures. Included step and fusion 360 parametric source files so you can play…
**All my designs are free to download, but if you like my work please consider to buy me a coffee =)** VW Beetle BUG - 1/18 RC body (PXtoys 9302, 9300) I bought a cheap RC car and designed a new body for it. You can find link to the RC…
Galileo2 (G2E) with filament runout sensor. - ECAS-Fitting compatible. - Step file included. - No change in overall G2E dimensions BOM: 1x Omron D2F microswitch 1x 5mm steel ball bearing (optional) 2x M2x8 self tapping screws (You might…
PUG mount based on hartk's PG7 mount that uses the new standoff mounting location (other PUG mounts hook into the extruder motor threads, which is not recommended). Tested with LDO Nitehawk-SB If you have an SB2209 RP2040 see Ozuwara's…
In order to cool my SB2040 canbus-board (with extruder-driver onboard) I used to have a 30mm fan cover sitting on my Clockwork2 extruder. Now switching to Galileo2, noone seems to have designed such cover, only for smaller 25mm fans…
B2EMO : Andor : Star Wars Droid. This has been available for a few years now -→ buried as an add on option in another model of mine. Hilarious. I spent 20 minutes looking for it thinking that It was posted as a stand-alone. Nope.
Every BMW owner knows this situation.. you're driving into some curve with about 100 km/h, your rear end goes left while you wanna go right and then it happens.. your Redbull that you put in the OEM's cupholders spills and you have a mess…
Two-part 3D printable enclosure case (base + lid) designed for the ESP32 2.8 inch display module (ESP32E). Features a screen window on the lid, ventilation slots, USB port cutout and screw posts for assembly. Footprint 96.4 × 60.4 mm.…
The super cute and awesome B2EMO droid from Andor Printed in 0.2 layer 0.4 nozzle Scale the parts to youre wish, this one was printed at 200% recommend atleast 200% (with 0.2/0.4) or bigger. you can print the red and metal parts…
This is a straightforward two part case for the ESP32-S3 CYD 3.5" display. For assembly you'll need - (4) M3x4 heatsets and (4) M3x8 SHCS.
Merged Hartk's G2E umbilical with the PUG connector
Ich habe mich immer geärgert, dass das Eisfach des Thetford-Kühlschranks nicht offen blieb, wenn wir das Fahrzeug in den Winterschlaf geschickt haben. Natürlich geht auch ein Korken. Diese Ecke bleibt aber, wo sie hin soll. Mein…
UPDATED 4/13/2024 to comply with G2E Release 1.0 This is a combined version of Baze_24616 & hartk PG7 Umbilical for use with CNlinko LP-12 8-pin connector and a mounting location for 3DO Nozzle Camera Board. STEP file included.
EC12 Encoder knob, perfect for through hole D shaft low profile encoders. Fits encoders like EC12E1220301 and EC12E2440
Simple fan duct for the Tronxy X5SA-2E. This is a remix of the original fan duct that was in the original sd card, I simply added two new directions from where the air can come out. The original one had issues cooling the parts of a print…
this is a cover for a casio fx-82EX, including a design
This is a mod of the cable cover to add a 25x25x7mm cooling fan to cool the toolhead board. GitHub Link Updated 2023/12/12 per comments to improve printing. Thank you @indi8six_1180574 & @jetcat_560589 Updated 2024/4/4 to comply with G2E…
This is a Cheap Yellow Display (CYD) case for an ESP32-32E layout. The layout is a bit different than others out there, but it's what I had and I wanted to protect it. Since I couldn't find one that really worked for what I was wanting, I…
This is a straightforward two part case for the ESP32-S3 CYD 4.0" display. For assembly you'll need - (4) M3x4 heatsets and (4) M3x8 SHCS.
Printed socket for ESP8266. I am using it to place ESP in PCBs. It can be used also in breadboards, just be careful when inserting it. Pins are to be added curving copper cable without any plastic cover. Cable wire has to be bended as a…
These are boxes to be used with the map tiles for Mansions of Madness 2nd Edition and dividers for ease of discovery. The dividers are used to find tiles easily and be able to put them back with ease. The dividers included here do have…
Designed this case for my NodeMCU 1.0 ESP-12F ESP8266 board. Ordered a bunch of those from AliExpress (e.g. https://www.aliexpress.com/item/1005001621705950.html ) and needed a case to fit them. Case provides access at the front side to…
A model of the Triop Selljammer from second edition Dungeons and Dragons. This model was designed for a commission for use in a second edition Spelljammer game but it could easily be ported into fifth edition if desired. The original…
EC12 encoder with skirt that covers the encoder base. Compatible with MX spaced choc switches but I'd guess it works fine with choc spaced switches as well.
Halterung für 22 Farben + 10 Pinsel Praktische Halterung für Warpaint-Farben (Ø 2,5 cm) mit Platz für 22 Farben und 10 Pinsel. Perfekt für einen aufgeräumten Hobby-Arbeitsplatz! Gefällt dir das Design? Unterstütze mich gerne mit einer…
Redirects the air straight up instead of out. The longer model is for the three center sections, the shorter model goes on the ends. There's a slight gap at the very ends because the outer edges aren't perfectly vertical. Though they…
My players earn these physical hero points during our game. It's a great feeling when they perform a heroic action and I get to throw one of these tokens across the table. There are two options: one with the Paizo P logo, and another with…
I found the existing options for cable relief of the BTT EBB SB2209 USB were lacking in one way or another. So I made my own. My goals: Relieve strain on the umbilical cable. Compatible with the PUG system. Allow greater access to the…
Took inspiration from https://www.printables.com/@Jerryie and started cutting up vehicles from https://www.thingiverse.com/thing:3553160 It is scaled to 1:72 same as https://www.printables.com/@Jerryie tanks. Has different guns you can…
Adapter for Skywatcher Evolux 82ED / Canon EF - usable for every telescope or flattener with M48 ending. Tight threads, so It does not wobble. Material: PLA or PETG, but I would recommend PETG, depends on temperatures while you shoot…
A model of the Skeleton Ship Selljammer from second edition Dungeons and Dragons. This model was designed for a commission for use in a second edition Spelljammer game but it could easily be ported into fifth edition if desired. The…
The original SB2209 misalignment protector didn't work for me with G2E (using https://github.com/IRTrail/G2E-Filametrix ). The raised part next to the pins doesn't fit inside the opening the G2E body leaves. This version flattens the part…
Customized version of https://www.thingiverse.com/thing:3968935 Created with Customizer! https://www.thingiverse.com/apps/customizer/run?thing_id=3968935 Instructions Using the following options: focalLength = 420 aperture = 83 capDepth =…
A model of the Vipership Selljammer from second edition Dungeons and Dragons. This model was designed for a commission for use in a second edition Spelljammer game but it could easily be ported into fifth edition if desired. The original…
https://github.com/juliusjj25/G2E-Filametrix-Lever-Switch-Mod Without supports. In one of the latest updates, Fusion 360 significantly reduced the model quality when exporting to STL (fewer polygons). Because of this, I now export from…
I wanted cool handouts for my players to have to help them count the number of actions/reaction they had left each round as well as a few tokens for Hero Points. Couldn't find anything I liked, so I ended up making some myself a while…
This model is compatible with the lego system.
A very simplistic pug mount for g2e working with btt sb2209 can
Here Are you seeing , an Gantry Servo Depressor for the Filametrix or the FilamAtrix. This Servo Depressor works with the normal Filametrix or FilamAtrix (CW2 and G2E) Material are needed: 1 x M3 Heatnut 1 x M3 4x3x5 Heatinsert (short…
the support can be easily removed M6, M10 and ECAS Coupler
A bajtinov mask for the skywatcher Evolux 62ED. Printed in Prusament PETG on MK4 using Prusament PETG profile / 4 walls.
What is a pirate's favorite letter? You'd think it be R but no it be the C And if you're going to survive out there you'll need to have all your little cardboard pieces organized. This is an organizer insert for Nemo's War Second Edition,…
3d printed base for aligning pogo pins and mounting a serial module to allow programming of a bare ESP-12E module. Probably works for ESP-12F too. And others? Category: Tools
I was looking for a stand for my watch, but nothing fit my specs. Made my own in Fusion 360 :). Print Settings Rafts: No Supports: Yes Resolution: 0.2mm Infill: 20% - 40% Material: PLA
I wanted to have G2E with the ERCF Twin Sensor support, but without the Filametrix cutter. I'm planning to use the EREC in place of the Filametrix. Currently not tested or printed yet. Length of the PTFE Tube on page 47 of the G2E Manual…
This model is compatible with the lego system.
This is the Galileo 2 Filametrix extruder for ERCF or Trad Rack. I couldnt find a entry sensor only for happyhare. So i remixed the g2e to what I needed. Been working great on my 2.4 350 build. I use revo voron so i have included those…
My NICE remote didn't came with a wall supoort so i made one :)
I needed a way to program a Tuya CB3S chip without removing it from the PCB, and didn't want to solder if I didn't have to. So I made a jig that uses 1mm pogo pins. Print this in whatever filament you want (I used simple PLA) then…
This remix was made to allow usb connection with BTT SB2209 toolhead board as the original model blocks the USB input. PUG Clamp and Bottom Standoff parts as exactly the same of the original model, but I provided them here for…
with integrated supports
Case for the slightly longer, 40 pin version of the WROOM32 Bluetooth Module. The lid is push fit and the board fits perfectly within the hollow - you may need to scale depending on your printer tolerances. Printed in PLA with no AMS - I…
Cheers to Bootjevaarder's original design which I remixed to fit the smaller chassis of the Eufy Video Doorbell 2E (Battery). The screw holes (on center) are about 12mm closer together in this remix and the wedge is about 3-4 mm thinner.…
A model of the Eel Ship Selljammer from second edition Dungeons and Dragons. This model was designed for a commission for use in a second edition Spelljammer game but it could easily be ported into fifth edition if desired. The original…
This is a Gridfinity holder for the Panasonic Lumix batteries DMW-BLC12PP and DMW-BLC12E, used in the Panasonic Lumix FZ200 und FZ1000. It might fit more, but I can't really say which because I only have these two at home. ----- Dies ist…
Trays to hold your Gloomhaven enemies (2nd edition) Together, these two trays hold all the standees for the normal and elite monsters that come with Gloomhaven 2nd edition ( https://cephalofair.com/pages/gloomhaven ). Each group of…
I made these to help my group keep track of their available actions while we make the transition from D&D to PF2. I've included the individual tokens as well as a full set of 4.
Charger stand for Huawei GT 2e smartwatch
I loved the original design, but it didn't fit sleeved cards, so I just made the boxes a little larger to accommodate sleeves, and made lids for the card boxes so the cards don't fall out. I also added token holders with lids to speed up…
more sturdy with 4 mounting points now! I suggest 4 aluminum stand offs! I designed this for XOL; G2SA orbiter pattern, and Vitalii metal tap! Update: added overmold for proper SHT36 support
This is a version of hartk PG7 Umbilical for use with CNlinko LP-12 connector and a mounting location for 3DO Nozzle Camera Board.
This is a totally minimalistic case for the ESP8266-12E NodeMCU . It is designed for using the device without pinheaders the possible necessary wires soldered direct to the PCB. There are four holes in the cover to be able to press both…
Par rapport à la version originale, j'ai refais la partie arrière en ajoutant 4 trous pouvant recevoir des aimants de 8mm de diamètre par 3mm d’épaisseur. Compared to the original version, I redid the back by adding 4 holes that can…
BL-M8812EU2 cooller case; radiator: aluminum 35x35x10mm cooler: 30x30x10mm 12v with txpower 45 it heats to 42 degrees
Um gegenüber meinem anderen Aufbau einen der beiden Festool Staubsaugerschläuche zu sparen und den Saugweg zu verkürzen habe ich die beiden folgenden 90° Adapter entworfen. Funktionieren super und mit folgenden Druckereinstellunden auch…
I would recommend printing the coin with a 0.25mm nozzle to print the map correctly.
Eine Halterung für 2 Einhell X-Change Akkus
I only needed a tray for two beer crate, maybe someone else will find it useful.
Galileo G2E chain mount for SIBOOR June 2024 trident kit. The Galileo mounting depth is greater than that of the standard SB. It is not compatible with mounting motors on top of the portal.
Simple tokens for keeping track of actions if you want something physical
Didn't like the other alternatives, so I made my own modifications to the design to accommodate the protruding USB-C port on sb2209 (rp2040). The only modified part is the mount. All other files are unchanged from the original.
Fits the original box. Ears/handles are sufficiently tall to grab the basket and extract it. Sits on the table and does not interfere in the dominance checks. Printed in PLA on Prusa Mk3. https://github.com/jmettraux/pamir.scad
This is a compact, functional enclosure designed specifically for the ESP32E-N4 IR Blaster / Receiver board . It features a minimal footprint, toolless assembly, and precise cutouts for operation and connectivity. Features Snug Snap-Fit…
This truck was designed to go with the PRR F-22 Flat car I posted http://www.thingiverse.com/thing:2069464 I used 3mm stainless axles cut to 1.86" long and 3mm x 3mm x 7mm bearing from eBay pressed into the truck sides. Print Settings…
Spool holders for 18mm rods or 1/2" EMT. Designed for the (Un)Original Prusa Dry Box but could have many other uses. Holders clamp on the bearings on the inner race and offer clearance for the outer race to eliminate any drag on the…
This was my first farm to table print, I have an amazing old Pfaff 1222e sewing machine. I woke it up and flicked the take up lever which crumbled in my hands,… this left the knurled metal pivot intact but no way to turn it. I measured…
I liked hartk's strain relief mount for the reaper and wanted to splice it together with this umbilical mount for the StealthBurner G2E. I ran into an issue using the Filametrix version due to it not have a mounting hole for one of the…
EN: Cover for Nice remote controls ON2E / FLO2RE with 2 buttons. Main purpose of this cover is protection against on accidental triggering of very sensitive buttons while remote is in pocket etc…. Printed from PLA with 0,2mm layer - 15%…
Recommend print setting Layer height: 0.28mm (save time) Infill: doesn't matter Material: I tried with PLA+ and PETG, both works fine but will recommend using PETG for durability. *Please noted that the second picture is my own customise…
G2E cat hears usable whith filametrix Twin sensor 5.5 ball
With a Trident printer, headroom is limited, and the umbilical needs extra space to function effectively. To address this, I remixed a few G2E extruder designs and created two mounts: a swivel mount on the toolhead, which currently pivots…
This is a modified G2E Cable Cover with Voron Logo for venting. You may also be interested in my other Voron Trident mods shown here or at https://www.printables.com/@JimChristian_3198049 &…
It didn't help with the high temperature of the toolhead mcu temperature but it's lighter.
This is a Bahtinov mask with an integrated lens cap for the Lacerta 72/432 ED refractor. This is the same scope as the William Optics Megrez 72ED, or Levenhuk Ra R72 ED, so it will fit those, I added the clean lens cap without text for…
I was looking for Pathfinder 2E related models, and came across a nice initiative and condition tracker by Nazghul on Thingiverse. I decided I was going to use it for my upcoming PF2E campaign so I edited the condition markers to make…
Print this and it's mirror and bolt together using Tronxy's original hardware plus 2 m3 screws and nuts. Get the other parts from https://www.thingiverse.com/thing:2149867 Print instructions Category: 3D Printer Parts Print Settings…
hartk model with added cable support for (hopefully) :D better input shaper results and tider look.
I already own some real nixie clocks and so want to have a lixie looking and acting as similar as possible like the nixies. So, based on Folkers lixie digit, I created digit positions for colons and used an ESP8266-Module ESP-12E for…
Austausch Zubehörfach (Lautsprecher, Blinklicht, Scheinwerfer) gegen 3er Akkuträger DJI Originalkoffer kann so 9 Akkus (10 wenn Akku in Drohne eingelegt ist) aufnehmen. Tipp: Unterhalb noch etwas Schaumstoff aufkleben, damit die…
+2-slot Mini Stability Feet This is an upgrade of the 2er stability feet directed at both Prusa MK2.5, 3s+ and Mini Owners. It gives stability to the 2er sheet holder while adding two slots for the Mini sheets without the need of printing…
My first version of my openIPC VRX. Used parts: -JLCPCB Board (my own creation) -2x Tps54560 StepDown Boards (only for some parts) -2x FAN “SEPA HZ25B05” -2x RTL8812EU -4x SMA connector -1x 5-WAY SWITCH -1x Radxa Zero3W -1x USB hub FE1.1s…
you have to compensate for material shrinkage if printed in abs! 1% scale up worked for me!
Frame braces I made for my Tronxy P802E that got rid of most of the wiggles. I made some revisions to a few parts after making the ones that are on my printer so some will look a bit different then in the photos. The braces on the front…
This is a versatile antenna system that can work as both an adjustable dipole antenna and a vertical antenna using inexpensive off the shelf components. It is highly recommended to print this in PETG with 100% infill as the stress caused…
Simple probe holder for 2 probes (DS1052) just glue to the side of your scope This probably won't work if you still have the yellow tips at the end of the probes, you will need to modify it to make holes bigger
Having the bed shift on the wobbly springs mid print is very annoying so here is my answer. A cup part on one end and a post on the inside on the other. This tightly constrains the spring while still allowing plenty of adjustment range.…
You need: 2 M3x5x4 Voron Thread Inserts 2 M3 Screws 2 of those clamps https://www.printables.com/model/767060-voron-24-umbilical-exhaust-grill-for-pug 1 Umbilical of course :-) either the original one…
![Galileo 2 (G2E) Filament runout sensor (UPDATED) [Filametrix and ERCF compatible]](https://media.printables.com/media/prints/643093/images/5077730_2e554cb6-2575-420e-bb02-eb9297ec54fb_2b773503-77b1-47cf-bd2d-d7ff2e546f65/pxl_20231110_184825771.jpg)
