Search results: 2s

Sort order

2,023 models

P
PrintablesKryštof

Temp Tower PLA, PETG, ABS/ASA for Prusa MINI+, MK3S+ and MMU2S

Download, load and print! Every filament and printer is different. To get the best out of your printer, you need specific settings, which means a particular nozzle temperature. That is the time when Temperature Tower comes in handy. Every…

Print approx. €2.82–€3.44 excl. taxPreliminary estimate for one variant

Downloads
34,739
Likes
2,168
Rating
4.9
P
PrintablesEscape

Belt tensioner for Elegoo Neptune 2 and 2S for the x-axis

This is a belt tensioner for the x-axis of the Neptune 2 and 2S from Elegoo. Since the geometry and the structure of the X-axis differ greatly from the Ender, the complete body had to be rebuilt. Since the source data is not available, I…

Print approx. €18.08–€22.10 excl. taxPreliminary estimate for one variant

Downloads
1,362
Likes
103
Rating
4.85
P
PrintablesTerence

MMU2S Idler Tension Screw Retainer & Thumbscrew

A solution to eliminate the hide and seek game every time the MMU2S door is flipped. No disassembly or extra components required, reuse existing tension screws and springs, I printed the bases separately in a darker colour and I can…

Print approx. €0.21–€0.26 excl. taxPreliminary estimate for one variant

Downloads
1,219
Likes
228
Rating
4.74
P
PrintablesCalebTimoteo

K-2SO - Star Wars Pot Plant

Any feedback would be greatly appreciated . Could be use as a planter, pen holder, etc Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) Supports needed No Brim needed Scale it as you like :)

Print approx. €9.01–€11.01 excl. taxPreliminary estimate for one variant

Downloads
870
Likes
502
Rating
5
P
PrintablesMordiev

MMU2s Tension Screw Retention Washer

Every time I loosen up the two Idler tension screws and open the MMU2s one or both of the screws and their springs would fall out. They would bounce around and play a mean game of hide and seek. So I made these little guys. Literally the…

Print approx. €0.05–€0.06 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
854
Likes
78
Rating
4.78
P
PrintablesMartin

PTFE hose anti wear for Bambu Lab P1S, P2S & X1

Model PTFE hose anti wear for Bambu Lab P1S, P2S & X1 The PTFE hose anti wear where you see it starting to wear the hose is always making contact with top glass. PETG or PLA and (Recommended ABS) Thank you ;-)

Print approx. €0.07–€0.08 excl. taxPreliminary estimate for one variant

Downloads
772
Likes
136
Rating
4.86
P
PrintablesJoe Balough

MMU2S Filament Changer Stress Test Tower

This thing is a multi-color simple tower that is designed to quickly test the filament changes in your MMU2 / MMU2S. Included is the OpenSCAD file to generate the separate STL files so that you can generate a tower of arbitrary size and…

Print approx. €1.36–€1.66 excl. taxPreliminary estimate for one variant

Downloads
750
Likes
22
Rating
4.9
P
Printablesmcfada

Purge Volume Calibration Tool - MMU2S 5 Filament Color Change

Print this calibration tool and create little swatches you can go back to and read off the volume (in mm cubed) of material needed to purge a given color change. All 5 colors swap with all 4 of the other colors in each direction. That's…

Print approx. €2.00–€2.44 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
614
Likes
96
Rating
4.71
P
PrintablesNikolai Schauer

Seeed Studio XIAO ESP32S3 Sense housing

This tiny housing for the seed studio xiao esp32 s3 sense is TINY! I didn't find a mounting option I liked, so I made my own. Features: Magnetic base: Use a 14mm round magnet to attach the foot anywhere on your printer SD card is easily…

Print approx. €0.27–€0.33 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
432
Likes
33
Rating
5
P
PrintablesAinon3Dtisk

Tool box Bambulab P2S original

Hello, Today I have for you the Bambulab P2S original tool box . It is absolutely great for storing the original tools that you get with the P2S. It fits absolutely great and the writing just clicks on, no glue needed. I used PLA/PETG as…

Print approx. €5.90–€7.21 excl. taxPreliminary estimate for one variant

Downloads
409
Likes
59
Rating
5
P
Printablesmarcin212

Seed Studio XIAO ESP32S3 Sense Housing

This 3D enclosure is designed to securely house the Seed Studio XIAO ESP32S3 Sense, providing both protection and easy access to key components. The compact case ensures a snug fit while leaving essential ports and sensors exposed for…

Print approx. €0.52–€0.64 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
282
Likes
18
Rating
0
P
Printableswonkygecko

Lenovo M90q AOC-STGN-I2S v2 Network Card Bracket

This is a remix of the AOC-STGN-I2S v2 bracket designed by simbaja. His model was made for the M720q however I have a M90q which while very similar they changed the bracket area on the M90q ever so slightly causing the original design to…

Print approx. €0.64–€0.79 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
230
Likes
12
Rating
0
P
PrintablesZwackelmann

Les Paul Pickguard MMU2S Version

This is the mmu2s Version of my single version for a Les Paul Pickguard - an relatively Easy Print to give your Paula a personal touch :) Design is made for a mmu2s printer. You can create special effects if you are printing without…

Print approx. €1.44–€1.76 excl. taxPreliminary estimate for one variant

Downloads
206
Likes
21
Rating
0
P
Printables3DP-MAMSIH

MMU2s Idler 20 teeth Pulley Fit GT2-6mm

HI! print this idler / selector with different material, but it's a waste every time; so i came with this simple design combine the 20t 6mm gt pulley with the tensioner to make it more solid, hope it can make the process less complicated…

Print approx. €3.88–€4.74 excl. taxPreliminary estimate for one variant

Downloads
175
Likes
37
Rating
5
P
Printablesmaikt

Filament indicator LED cover for MK3S+ with installed MMU2S

This is a new version from the filament LED indicator, because the original one did not fit on my new Prusa i3 Mk3S+ (from 01/2021). It is to small in all dimensions, i think the dome of the filament sensor has been changed. It was…

Print approx. €0.48–€0.59 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
126
Likes
25
Rating
0
P
Printablesdoctorg

DJI Air 2S Strobe Light Mounts

These mounts can be used to affix strobe lights to your drone for greater visibility and to meet FAA nighttime flying requirements. They were designed for the Firehouse Arc V strobes lights, but could also be used for anything of similar…

Print approx. €1.04–€1.27 excl. taxPreliminary estimate for one variant

Downloads
115
Likes
18
Rating
0
P
PrintablesKrosta

MMU3/MMU2s Buffer holder in back of Original Prusa Enclosure

MMU3 Buffer holder, which can be in the Original Prusa Enclosure behind the printer. Ideal solution, if you don't want to have it outside, but still “easy” access to it. It is situated in the right back corner. The depth of it is 67mm,…

Print approx. €1.78–€2.18 excl. taxPreliminary estimate for one variant

Downloads
97
Likes
29
Rating
5
P
Printablesakamaka

MMU2S - Filament No indicator

This is an add-on to the https://www.prusaprinters.org/prints/110448-mmu2s-relocated-cca. For the shaft I used one of the aluminum tube supplied with the MMU2S filament spool holder. If you do not have one you can print the one included…

Print approx. €2.69–€3.28 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
89
Likes
37
Rating
5
P
Printablesdogulas

MMU2s ele cover with screw cage

This print is a replacement for the MMU2s electrical cover on the Prusa MMU2s module. This new cover also has two extensions that act as cages for the idler tension screws. The covers have holes to allow the user to access the screws with…

Print approx. €3.28–€4.01 excl. taxPreliminary estimate for one variant

Downloads
87
Likes
17
Rating
5
P
Printablesjankaspar

MN82s RC Tow Hitch

Tow Hitch for RC model MN82s and MN82.

Print approx. €0.77–€0.94 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
72
Likes
6
Rating
0
P
Printablesdigbat

MMU2S Tube Guide 20200225

A guide for 5 x 4mm OD tubes spaced 15mm apart. Top and bottom half bolt together. The guide has countersunk holes for screwing (lightly, these are not built for strength) to vertical surfaces if required. The M10 Bolts are relaxed,…

Print approx. €1.93–€2.36 excl. taxPreliminary estimate for one variant

Downloads
63
Likes
8
Rating
0
P
Printablestanglyfilament

Eco-Friendly Anti-Tangle Spool Cage For MMU2S

Avoid tangles and knots the next time your filament retracts! This is an eco-friendly, low-footprint spool buffer for rigid filaments like PLA, PETG, ABS, etc. Using just 10 meters of filament and cardboard from the filament shipping box,…

Print approx. €0.19–€0.24 excl. taxPreliminary estimate for one variant

Downloads
63
Likes
13
Rating
0
P
Printablesfhartmann

Extruder Idler MMU2S Adjustable With Screw Adj. Housing with Power LED and State LED and MMU2s Filament Sensor

Preview: At the moment I am working on a version that lights up a bit brighter. As soon I got the values I`ll post it. Description: It is a combination of several Persons and remixed for my need: Used 3mm Green and Yellow LED with 2mAmps…

Print approx. €0.06–€0.07 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
61
Likes
20
Rating
5
P
Printableshartzell

Tuya CB2S pogo pin jig

I needed something to make connections to the pads while I tried to flash a KMC Smart Tap Mini with OpenBK. It uses a Tuya CB2S module that's edge-mounted through the main circuit board. This jig can be held/clamped against the bit that…

Print approx. €0.18–€0.22 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
56
Likes
3
Rating
0
P
PrintablesMaxGyver

ODRIVE S1 D5312s 330KV flange mount

The mount is designed to use the Odrive S1 heat spreader. It aligns the motor shaft with the magnetic encoder and leaves a 1mm gap between the magnet and the encoder. A 6mm diameter an 5mm thick magnet sold in the Odrive shop is used. The…

Print approx. €0.13–€0.16 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
49
Likes
2
Rating
0
P
PrintablesAnheledir

Remix for MMU3 / MMU2S, 5 Spool auto rewinder for Repkord Repbox V2.3 with slip-rod system

You can either print the Zwinder-Model and only replace the side-parts of the stand with my remixed version. Or you can use my pre-arranged 3mf and bcode files to print everything you need at once. Sheet 01 needs to be printed once per…

Print approx. €3.04–€3.71 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
36
Likes
8
Rating
0
P
PrintablesNicke80

SkyRC GSM020 Mount for Traxxas Stampede BL-2s and Hoss 4x4

I designed this mount for the SkyRC GSM020 Performance Analyzer to fit the BL-2s Stampede right on the top of the steering servo. It may also work with the Traxxas Hoss 4x4 since they share the same chassis, TRX9022. This mod is non…

Print approx. €1.28–€1.56 excl. taxPreliminary estimate for one variant

Downloads
32
Likes
5
Rating
0
P
PrintablesJadozub

The Penultimate Sub250 2s 21700 6" FPV drone, printed frame 35 km flight distance & 55 min of endurance!

Mum, look! This battery has a drone! The goal of this project was simple – take two 21700 Li-Ion batteries and build a drone around it, trying to maximize efficiency. This meant a lightweight frame and large propellers, as the batteries…

Print approx. €1.01–€1.24 excl. taxPreliminary estimate for one variant

Downloads
16
Likes
2
Rating
0

Prusa Enclosure V2 - MMU2S

Useful, nice looking and easy to build an enclosure for Original Prusa i3 MK3S with MMU2S unit build from Ikea LACK table. Check the article with build instructions . NEW After a lot of asks, the STEP file is available for download in…

Downloads
50,180
Likes
4,045
Rating
4.75

Bambu Lab - Filament Poop Bin - X1C P1S and P2S

This is my remix of the 1.3 version of the popular Poop Bucket from @Mikyleee It is basically an optimisation of the original design but is functionally the same. This remix eliminates a rear wall to use less material and makes overhangs…

Downloads
24,061
Likes
3,084
Rating
4.93
P
PrintablesPrusa Research

MMU2S Multi Material Upgrade Printable parts

All printable parts for your Original Prusa MMU2S Unit Sorted by kit assembly manual chapters. You can use the file list and folder structure here to prepare parts in the same order as you will need them according to the guide.…

Downloads
17,476
Likes
923
Rating
4.76
P
PrintablesMichal Fanta

Gravity spoolholder for MMU2S

Support me & Join Printables Club This is a spoolholder modification for MMU2S. For auto rewinding filament spools are using gravity. UPDATE: For those who do not have original bases, I added a modified printable base. And source STEP…

Downloads
14,699
Likes
3,354
Rating
4.79
P
PrintablesPrusa Research

Hinged lid for adding MMU2S to Original Prusa Enclosure

Printable accessory for Original Prusa Enclosure developed to enable access from the top. Can be used for a standalone printer or for a printer with a multi-material unit on the frame. Check the step-by-step guide on how to install the…

Downloads
10,227
Likes
1,063
Rating
4.8
P
PrintablesPrusa Research

i3 MK2S Printable parts

All printable parts for your Original Prusa i3 MK2S. Print instructions: Use Prusament PETG and the PrusaSlicer's default PETG 0.2mm presets.

Downloads
7,517
Likes
173
Rating
5
P
PrintablesPredy

MAD - Modular Air Duct for BIQU H2 / H2 V2S REVO / H2 V2S Lite / & E3D VOLCANO mod

Support my work +++ I will do my best to maintain and improve the project with incremental upgrades, but maintenance takes time and effort. If you wish to support my work and motivate me please consider to give me a donation +++…

Downloads
6,378
Likes
644
Rating
4.9
P
Printablesnilson_fx

Magnetic Poop Chute Bambu Lab P1P P1S P2S X1

13.02.2024 - Update: I added another magnet cap file for magnets with 10mm diameter that " Robert Hidasi " created and kindly provided to download. 23.09.2023 - Update: I added the magnet cap file that fireant designed and kindly sent to…

Downloads
6,329
Likes
609
Rating
5
P
PrintablesMarius M

CASE ESP32 2432S028 USB-C Module - Cheap Yellow Display (CYD) / CYD2USB

Basic case for USB-C version of the ESP32 2432S028 2.8" module, also known as Cheap Yellow Display (CYD) / CYD2USB.

Downloads
4,969
Likes
272
Rating
4.91
P
PrintablesK2ij3

Bambu Lab X1-Carbon / P1P / P2S Poop Shoot removable bucket

Print in PLA No supports needed Just glue Face and Tray together Hold at the printer by 10x2 magnets Detect thin walls should be enabled if printed with a linewidth greater than 0.4mm

Downloads
4,611
Likes
427
Rating
4.93

Prusa Printer Enclosure v2 – with MMU2S support - 0.125 inches acrylic version

**This print is modified for 0.125 inches (3.175 mm) thickness acrylic sheets!** Useful, nice looking and easy to build an enclosure for Original Prusa i3 MK3 with MMU2S unit. Check the article with build instructions:…

Downloads
4,587
Likes
437
Rating
4.74
P

Dummy 13 X K2SO / KX SECURITY DROID

Congratulations, You are being rescued Its time to re-live the Ghorman massacre and the Scarif vault with your own KX unit! The model uses Dummy 13 by @Soozafone as the base The frame was rounded and split up for the extremities to give…

Downloads
3,652
Likes
1,352
Rating
4.63
P
Printablesdotson90

Prusa MK3S Mesh Side Boxes MMU2S

Just changed the appearance using mesh modifiers in PrusaSlicer. Print instructions Printed using Prusament PETG. Could be printed without MMU. Requires 2 filament changes if you want the multi color.

Downloads
3,577
Likes
695
Rating
4.94
P
PrintablesManzn

MMU2S Buffer (inspired by RMU Buffer)

Hello all, when I saw the RMU ( LINK ) I was blown away ... unfortunately I miss the open source and community idea :-( So I decided to create my own version of a mountable buffer and yes I certainly got inspired by the RMU version. No…

Downloads
3,502
Likes
706
Rating
4.9
P
PrintablesSanka

MMU3 / MMU2S 5 Spools auto rewinder adapter for (un)original Prusa drybox / Repbox

This is an upgrade for users of MMU and who has (un)original drybox (also works with the Slim version). This system replaces the filament buffers. It's a project in development that I try to improve with the time, thanks for your…

Downloads
3,304
Likes
971
Rating
4.95
P
Printablesmdkendall

Enclosure for Sunton ESP32-2432S028R Cheap Yellow Display

This is an enclosure for the Sunton ESP32-2432S028R development board widely available from Ali Express, Banggood, Amazon, etc. The cost on Ali Express is only about $8 USD. The board includes an ESP32 WROOM-32 module and a 320 x 240 2.8"…

Downloads
3,069
Likes
220
Rating
4.77
P
PrintablesBlazko

Poop Chute with removable Container | Bambu Lab P2S/P1S/P1P/X1C

Are you tired of picking up all the Bambu poop from the floor? This is the solution! It is a simple chute that collects all the waste coming from your Bambu Lab printer in a small removable container on the left side. It is attached to…

Downloads
3,019
Likes
136
Rating
4.83
P
PrintablesRapterron

Spyro - (Reignited Trilogy) MMU2s (remix)

First of all, I am not the initial creator and only did some adjustments specially for Prusa Printers all credits for this awesome work please to this Guy: https://www.thingiverse.com/thing:3356047 Hello all, I still feel that MMU2s…

Downloads
2,665
Likes
666
Rating
5
P
PrintablesKryštof

Pin Support Sphere Challenge G-code for Prusa MK3SMMU2S and MINI+

Test the limits of your printer! Pin Support Sphere ChallEnge is a way of testing your printer's capabilities. It is designed to be hard to print, so only well-calibrated printers with quality filaments will print out a nearly perfect…

Downloads
2,615
Likes
88
Rating
4.92
P
PrintablesPlants X Tech

Plant and Animal Cell Models (MMU2S compatible)

these are remixes of https://www.thingiverse.com/thing:2485063 and https://www.thingiverse.com/thing:2811554 There were a ton of problems with the original models and they weren't compatible with printers unless they were configured with…

Downloads
2,158
Likes
651
Rating
5
P
PrintablesSPD3D

MMU2S Extruder MOD feeds almost any tip / NO jams (For me)

This modifications of the original prusa MMU2S extruder, were the only way i could make it work properly (for me). It has been really frustrating months, there is a lot of ideas you can find searching in forums, i tried all of them and…

Downloads
2,116
Likes
197
Rating
4.73
P
PrintablesMordiev

Double Stack IKEA LACK Enclosure V2 (works w/ MMU2s)

This is a printer enclosure large enough to hold the Original Prusa i3 MK3s with the MMU2s and five spools of filament. It is remixed from strita's Prusa Printer Enclosure V2 . The Version 1 you see next to it in the pictures can be found…

Downloads
2,068
Likes
570
Rating
4.76
P
PrintablesGiwi

2S 3S 4S 18650 Cage

Depending on the filament and cell, 18.52 can be a bit tight. To add .1 mm of spacing, scale the original by 100.54 % (1.00539)

Downloads
2,047
Likes
731
Rating
4.89
P
PrintablesScottyDoesKnow

XIAO Sense Case (Seeed Studio XIAO ESP32S3 Sense, Camera)

WARNING The webcam application gets the board too hot for PLA even with the heat sink. I haven't seen it obviously deform but in my case the snap fit stopped working. You'll need to use PETG (and the PETG versions of the case) which has…

Downloads
1,816
Likes
127
Rating
5
P
Printablespnd-systems

Mini Lizards MMU2S test

One of my first print with mmu2s. During the print I have to increase the Fillamentum's Crystal Clear Iceland Blue temperature, because it stuck in the extruder. I fixed it in the uploaded *.3mf file. In the uploaded file I also increased…

Downloads
1,806
Likes
107
Rating
4.89
P
PrintablesMichał

ESP32 Cheap Yellow Display (USB-C version) Enclosure (ESP32-2432S028R)

Remix of the enclosure designed by @mdkendall for the ESP32 Cheap Yellow Display (ESP32-2432S028R) found on Aliexpress & similar sites. Model adjusted for the USB-C board version, which does have slight variations of the connector…

Downloads
1,773
Likes
128
Rating
4.95
P

MMU2S Ikea Drybox

Stackable Ikea Samla Drybox and Spoolholder. You have an option of printing either just drybox for 2 spools, or spoolholder for three spools, or both. Dybox was able to maintain 16%-18% humidity in environment with in between 45% to 92%…

Downloads
1,765
Likes
141
Rating
4.75
P
PrintablesPrusa Research

i3 MK2S to MK3S Upgrade Printable Parts

Original Prusa MK2S to MK3S Upgrade printable parts. Note, this is a legacy download. This is the upgrade to MK3S, not the newer MK3S+.

Downloads
1,657
Likes
58
Rating
5
P
PrintablesMatt Wilde

Case for Sunton ESP32-2432S028 2.8" TFT-Touch Board

This is a small protective case for the following Sunton board: ESP32-2432S028 Note: You'll need 2x M3*4 bolts to attach the PCB to the casing. If you are looking for additional electronics projects, checkout the following page:…

Downloads
1,571
Likes
96
Rating
5
P
PrintablesPTBRB

Phone case for Samsung Galaxy A52/A52s

I redesign the model created by Callan McNamara of a case for the Samsung Galaxy A52 phone. I adjust the cut out for buttons and connectors, tightened the case and proposed an other pattern cut out in it. I tried to print it in flexible…

Downloads
1,556
Likes
98
Rating
4.9
P
PrintablesBlackyIV

BiQu H2 (V2,V2S) fanduct for single / dual 5015 Fan - standart / volcano heatblock

BiQu H2 fanduct for a single 5015 fan Parts Needed: 2x M2.5 x 6 countersunk screws 2x M3 Nuts 2x M3 x 24 screws Printsettings: Layerhight: < 0.15mm Support Needed BiQu H2 fanduct for a Dual 5015 fan Parts Needed: 2x M2.5 x 6 countersunk…

Downloads
1,488
Likes
124
Rating
5
P
PrintablesRapterron

Spyro the Dragon - 35cm tall - MMU2s - Reignited Trilogy (remix2)

I made a 2nd remix of this beautiful Spyro the Dragon full multi material model with way more details (he got more dragon scales on his back) and some corrected anatomy. Besides increasing the details I also sliced him into 2 parts and…

Downloads
1,455
Likes
377
Rating
5
P
PrintablesPrusa Research

MMU2 to MMU2S upgrade

Original Prusa MMU2 to MMU2S upgrade printable parts Note, these are not the parts for the MMU2/S unit itself nor the parts for the i3 to MMU2S upgrade.

Downloads
1,424
Likes
49
Rating
4
P
PrintablesEvofab Inc.

MK3S & MK2S LCD COVER

LCD cover for prusa MK3SMMU2S & MK2S Print instructions LCD COVER STL FILES: 1- You need to download only these files lcd-cover-mk3s_assy.stl or lcd-cover-mk2s_assy.stl knob_assy.stl 2- Split the parts into PrusaSlicer to assign extruders…

Downloads
1,415
Likes
106
Rating
4.83
P
Printablessblomfield

MMU2S/MMU3 PTFE Tube Organizer/Guide

Holds your PTFE tubes from the MMU2/MMU3 nicely parallel - which helps to reduce friction. The part does not actually clamp the hose, but the friction should be enough to hold it in place. The model allows you to choose either an M3…

Downloads
1,401
Likes
269
Rating
4.94
P
PrintablesSarper Kaya

DJI Mini 3 - Mini 2 - Air 2 - Air2s Lanyard Mount

DJI Mini 3 - Mini 2 - Air 2 - Air2s Lanyard Mount It holds itself. You can leave it on the RC all the time. Version 2 This version for those who wants to fit controller to tight cases when the lanyard mount is already mounted. ( I…

Downloads
1,369
Likes
191
Rating
4.92
P
PrintablesIsaacW

Prusa MMU2S Rear PTFE Holder

I wanted a quick and easy way to remove the PTFE tubes from the back of the Prusa MMU2S. I found that loading filament and clearing jams is so much easier when those tubes can be easily removed. The material doesn't really matter, as…

Downloads
1,322
Likes
175
Rating
4.89
P
PrintablesSartor

Batteries holder for 18650 or 21700 lion packs (6S, 4S, 2S)

Better to print from temperature resistant filament (ABS, PETg) and without supports

Downloads
1,303
Likes
113
Rating
5
P
Printablesmdj

MMU2S pulley-body mod

This mod of the MMU2S part mmu2-pulley-body decreases the space around the pulley axis and has more support guiding the filament than the standard part. When printing flexible filaments through MMU2S they tend to get stuck in the pulley…

Downloads
1,232
Likes
183
Rating
4.88
P
Printableszeroflow

MMU2S Ikea Samla Filament Spool

As a cheap dry storage box for filament, IKEA Samla boxes (57x39x28 cm) are used by many. Sadly, when using a short piece of pipe to hold filaments, changing just one without disturbing the other three is very hard. Each Samla box can…

Downloads
1,142
Likes
178
Rating
5
P
PrintablesEscape

Satsana for Elegoo Neptune 2 and 2S

This is my 2nd version in the 5th update For Mounting: Push the nozzle onto the bed Screw the screws into the duct beforehand Push the cable out of the hotend into the housing and place the duct for the screw holes Place the spanner under…

Downloads
1,133
Likes
88
Rating
4.84
P
PrintablesPosix

Purge calibration tool for all MMU MMU2S MMU3 on MK3 MK4

Update 16-Jun-2024 : With the amazing contribution of @poelstra_2112725 on MK4 with MMU3, we have achieved more than one color changes per test print, to a maximum of four. Amazing idea to print the numbers before the purge block so that…

Downloads
1,129
Likes
301
Rating
4.78
P
PrintablesSe9n

Remix MMU2S Buffer (Inspired by RMU Buffer)

I wanted mine to look like the OG and have a top load option, so I remixed it do that. The mounting files can be found on the original post that I linked. This only includes the files I changed.

Downloads
1,093
Likes
144
Rating
5
P
PrintablesMichele Bordoni

Prusa stronger MMU2S Idler

During the assembly of MMU2S I cracked the part. I suddenly discovered that many people are having my problem so I updated the Prusa part to get it stronger. This design is based on R1 prusa part. Print instructions I have printed it with…

Downloads
1,088
Likes
68
Rating
4.94
P
PrintablesKevin Scott

Bosch GCM12SD Axial Glide Miter Saw Zero Clearance Insert

I printed mine at 100% infill. Then I used CA glue right before screwing it down. Once I screwed down the insert, I made the cut.

Downloads
1,077
Likes
118
Rating
4
P
Printablesunhild

Meshtastic Seeed Studio XIAO ESP32S3 & Wio SX1262 case

This case is designed to house the Seeed Studio XIAO ESP32S3 & Wio-SX1262 along with a LiPo 1100mAh battery (size 703048) Update 07.08.25 Added a power switch, removed the button (since it's no longer needed with the switch), and added…

Downloads
1,072
Likes
146
Rating
5
P
PrintablesJace1969

Rogue Ones K2SO Full Size Working Project

Been wanting to do a full size K2SO for my Man Cave for a while and I see there is a really cool one over here http://www.thingiverse.com/thing:2038000 ,but I found this really detailed model over with the guys on FacePunch.com "Only…

Downloads
1,033
Likes
171
Rating
5
P
Printablesmorozgrafix

Snap-fit case for Seeed Studio XIAO ESP32S3

Snap-fit case for Seeed Studio XIAO ESP32S3 UPDATE: Added STEP file for the model for future improvements and modifications by the community. Please respect the CC Attribution Non-Commercial license. Features: Snap-fit case, no additional…

Downloads
1,029
Likes
81
Rating
4.67

MMU2S MK3S Extruder Idler with bolt

After assembling my MMU2S and upgrading to the MK3S I had a lot of problems getting the filament to load. The issue was the triggering IR sensor in the extruder head. Following the instructions I did a very small trim of the idler arm,…

Downloads
1,027
Likes
53
Rating
3.8
P
PrintablesSebolo

Multicolor Charizard for MMU2S

.3mf file plus gcode for printing charizard with your MK3S+ with MMU2S This model needs to be printed with supports. Please be VERY careful and patient when removing the supports, because it can be quite tricky. Color layout for the…

Downloads
994
Likes
99
Rating
0
P
Printablesjonnybergdahl

Case for ESP32-2432S028R (AKA Cheap Yellow Display)

I needed a case for the CYD (Cheap Yellow Display) that was thin enough to use 180° USB adapters. The existing cases was too thick so I designed my own one. The case have a cutout for the RGB LED on the backside and “buttons” for the…

Downloads
981
Likes
77
Rating
5
P
PrintablesRobSmo

DJI Mavic Air 2 2s Mini 2 sunshade

Once I created my iphone dedicated sunshade I decided that it's time for universal one. So, this one is a three part print in two size options: normal - fits iphone X/XR/12/13/14 size phones (regular versions) MAX - is designed for big…

Downloads
974
Likes
198
Rating
4.8
P
PrintablesVoxel3D_NL

BIQU x E3D H2 V2s Revo 3D model

3D model based on the dimensional drawings and images publicly available online. For reference and design purposes only. You can measure the step file or use it to design fan ducts, mounts etcetera! Note; this model is not publicised or…

Downloads
971
Likes
29
Rating
0
P
PrintablesSeeed Studio

3D Model for Seeed Studio XIAO ESP32S3 Sense

Seeed Studio XIAO ESP32S3 Sense leverages dual-core ESP32S3 chip, supporting both Wi-Fi and BLE wireless connectivities, which allows battery charge. It integrates built-in camera sensor, digital microphone. It offers 8MB PSRAM, 8MB…

Downloads
953
Likes
27
Rating
0
P
PrintablesPrusa Research

i3 MK2 to MK2S Upgrade Printable Parts

Original Prusa i3 MK2 to MK2S Upgrade. This is a legacy download.

Downloads
938
Likes
46
Rating
0
P
PrintablesMY

Magnetic Poop Chute for Bambu Lab H2D/H2S – V2.1

Magnetically-attached poop chute. 6x2mm magnets by default Configurable – for width/height and type of the magnets, see OnShape model below Option to mount with a screw that already exists under the poop hole Prints without supports (on…

Downloads
935
Likes
41
Rating
0
P
PrintablesPaKr82

Extruder Idler MMU2S Adjustable With Screw

I had many issues/errors/problems with my mk3s+ mmu2s while printing multi color. I can tighten idler screew to not have stopped filament, but than I had issues to work IR sensor right. I loose scree, IR sesor was working right, but…

Downloads
922
Likes
138
Rating
4.83
P
PrintablesDavid

MK3S+ MMU2S Precise Calibration Chimney

___________________________________________ Make sure to also check out the MMU3 UltiMulti printable parts ___________________________________________ Chimney and Chimney-base parts are an alternative to the Prusa ir-sensor-holder-mmu2s…

Downloads
912
Likes
220
Rating
4.91
P
PrintablesAbhilash M

MMU2S Filament Buffer

Filament buffer to have the least amount of parts and improved wheel. The stands can be attached to the base using M3-10 screws, while everything else just slides in place. If needed a a small dab of CA on the ends will help secure the…

Downloads
911
Likes
217
Rating
4.71
P
PrintablesDombi3D

MMU2S filament buffer upgrade for Samla 22l Drybox.

With this upgrade you can keep your filaments dry and organized in a very small footprint. You do not need anymore the filament buffer. These designs should be compatible with all 200 mm Spools which has a round (Das Filament type) or…

Downloads
896
Likes
351
Rating
0
P
PrintablesCallan McNamara

Samsung Galaxy A52s Case

About A snap on case for the Galaxy A52s. I've uploaded versions with and without the back pattern shown in the picture. Made with OpenSCAD, I've included the .scad file in case you want to tweak it. Printing I printed on a Prusa MK3s at…

Downloads
894
Likes
42
Rating
4.75
P
PrintablesJeff Chen

SD Card Port Cover for SD2SP2 POR/Easy Access Version

The SD2SP2 POR (Pro?) has a problem - there is a gap between the SD card slot and the GameCube chassis. It's very easy to insert the SD card into the void and you'll have to unscrew the GameBoy Player just to retrieve the card. Print this…

Downloads
891
Likes
67
Rating
5
P
Printablesmarcusone

Sunton ESP32S3 8048s043c 4.3" Screen Case

Sunton ESP32S3 8048s043c 4.3" Screen Case https://www.aliexpress.com/item/1005004788147691.html?spm=a2g0o.order_list.order_list_main.21.51981802EHw6b4 Using OpenHASP https://www.openhasp.com/0.6.3/ For the back to screw on, I used M2x12…

Downloads
887
Likes
29
Rating
5
P
PrintablesTheZeroBeast

TZB MK3S+:MK2.5S+/MMU2S Extruder (MMU2S NO TOWER!) V3

This is for use with PRUSA i3 MK3S+, MK3S+:MMU2S & MK2.5S+ printers. Designed to be used with TheZeroBeast MK3S:MMU2S Firmware here... " https://github.com/TheZeroBeast/TZB-MMU2S-Firmware/releases " V3 Changes combine with R6 stock…

Downloads
885
Likes
165
Rating
5
P
PrintablesPrusa Research

i3 MK2S to MK3 Upgrade Printable parts

Original Prusa MK2S to MK3 Upgrade printable parts. Note, this is a legacy download. The neccessary hardware for the upgrade is not sold anymore as a bundle. This is the upgrade to MK3, not the later MK3S nor MK3S+.

Downloads
863
Likes
40
Rating
5
P
PrintablesPetclaud

Extruder motor rotation indicator (Prusa i3 MK2/MK2S/MK3/MMU2)

Just another design for an extruder rotation indicator/visualizer. Print, glue a 8x3mm Neodymium magnet to it and snap it onto your extruder motor. I have used CorrugatorSupercilii's OpenSCAD Turbine Propeller Generator to generate the…

Downloads
844
Likes
101
Rating
4.67
P
PrintablesA3B

Prusa MMU2S thumbscrews for idler tensioning

This is a remix of the MMU2 thumbscrews for the MMU2 S . The longer thumbscrew should avoid accidentially pushing buttons on the MMU2S. If you already printed the short/original, you just have to replace the left thumbscrew, because there…

Downloads
841
Likes
129
Rating
4.97
P
Printableszeros

MMU2S R2 Selector FINDA remix with magnet

This is a remix of the MMU2S Selector FINDA version R2 (improved blade holder mentioned in release notes for Firmware 3.9.0) with a slot for a 6x2x10 magnet for improved FINDA reliability. (The magnet used is the smaller of the magnets…

Downloads
827
Likes
64
Rating
4.89
P
PrintablesSean Cadet

Drone display stand with interchangeable mounts for DJI Mavic Mini 2/SE and Air/ Air 2S

I have two drones that I currently don't use, just sitting there collecting dust and thought to myself, why not put them on a cool looking pedestal so I can place them on my shelf and show them off to my visitors :D Looked around Amazon…

Downloads
826
Likes
121
Rating
5
P
PrintablesFloatingCam

Wall Mount Solution for MMU2S

An alternative to trays on the desk this wall mount solution for the Prusa MMU2S Filament Buffer reclaims desk space and makes filament management easier. There are also printable buffer barriers that have more fingering room making it…

Downloads
810
Likes
164
Rating
4.92
P
PrintablesMatthew Wong

BK1S/BK2S LVOA 7.7"/9.5" Handguard (MLOK compatible)

This handguard for the BK1S/2S replicates the look of the LVOA AR handguard in a 9.5" length. It is compatible with the handguard nut that comes with the blaster, as well as the original screw and nut. All MLOK slots are functional. The…

Downloads
799
Likes
143
Rating
5

XIAO Sense Case (Seeed Studio XIAO ESP32S3 Sense, Camera) with Vive Facial Tracker Mount

Remixed with the intention to use the Xiao Sense camera as a facial tracker with Project Babble.

Downloads
777
Likes
50
Rating
5