Search results: 350mm

Sort order

127 models

P
PrintablesCrazy3D

Ultra Articulated snake - new design 200mm and 350mm lenght

Now - here the design of my articulated snake, which is not that spiky anymore and in common sizes for fast prints. On my Elegoo Neptune 4+ the 200mm snake took 1h to print, the 350mm snake 2h. The joints are the improved one from the…

Downloads
2,068
Likes
93
Rating
5
P
PrintablesKen226

Voron 2.4 Skirts with Hex infill. 250, 300 and 350mm sizes.

I remixed the default Voron 2.4 skirts, adding a hex pattern inside the original hex. I also remixed the fan mount skirt, adding the same hex pattern and reworking it to be mounted backwards. The backwards mounting was necessary to allow…

Downloads
1,948
Likes
319
Rating
5
P
PrintablesSy Noon

Voron Trident 350mm chassis

This is still an untested WIP, but I am uploading in case people like the idea enough to modify to fit other printers. I intend for the handles to be useable. A ½" square profile steel pipe is to be tapped and inserted into the top…

Downloads
1,484
Likes
717
Rating
5
P
PrintablesDraegyn

nozzle-scrubber-with-a-large-bucket-for-voron-24-350mm

Liked the big bucket but needed it to fit my 350 model.

Downloads
736
Likes
40
Rating
5

Voron Trident 350mm (Assembly STEP)

I was very surprised when I couldn’t find a CAD assembly of the Voron Trident 3D printer. For the convenience of customizing my printer, I prepared an assembly in STEP format based on the files from the GitHub repository:…

Downloads
441
Likes
32
Rating
5
P
PrintablesMadeWhatNow

XL Moon Lamp 350mm / 13.7" with IKEA fittings for PrusaXL

[edit - the current gcode file prints a model with fairly substantial walls. This makes for a robust moon, but is not ideal for lighting purposes. Currently working on slimming down via the model creation process.] I could not find a moon…

Downloads
422
Likes
83
Rating
5
P
Printablesjmillerfo

Blobifier for Voron 2.4 350mm Printer

Build Instructions: Print Blobifier and optionally Brush Holder and associated Bucket-Brush, Install M3x2 Magnet into Bucket-Miller350, Install 4 Heat Sets into SB_Shaker_arm, Install the SB_Shaker onto the SB_Shaker_arm using 2 M3x8 FHCS…

Downloads
409
Likes
81
Rating
5
P
PrintablesTDX3D

Voron 2.4 Rear Skirts with Hex Infill - 350mm

Update: 4/9/25 Included rear skirt for individual plug and switch.

Downloads
272
Likes
37
Rating
0
P
PrintablesExerqtor

Voron 2.4 & Trident 350mm Canopy side handles

2.4 & Trident 350mmCanopy side handles CHANGELOG: 30.03.2024: Initial release. Description: I didn't want to remove the handles on my Trident when I started to print JSmith17's Canopy but didn't like the avalible options. I've been using…

Downloads
263
Likes
64
Rating
5
P
PrintablesIroncat Racing

Basketball Trophy 350mm Tall

This was a trophy I was commissioned for and turned out really well! From just a photo I was able to recreate the trophy with minimal difference between them. Trophy stands (completed) 350mm. All parts were designed to have minimal…

Downloads
218
Likes
15
Rating
0
P
Printablessalbang

VORON - USB Keystone 350mm Skirt

This is a remix of https://www.printables.com/model/192455-voron-usb-keystone-delock for 350mm build. This is for right side of the front skirt. You may mirror it to use on the left side of the front skirt.

Downloads
203
Likes
16
Rating
5
P
PrintablesRoggan

Voron 2.4 350mm skirt a power switch mod

Voron 2.4 350 mm front right skirt modified with a hole for a power switch Hole size: 22x30mm

Downloads
192
Likes
29
Rating
5
P
PrintablesJesus

Endstop buildplate Voron 2.4 350mm

This vertion now you can print without supports, easy setup, stronger that the first vertion. BOM 2 M3 x 8mm 2 M3 Hammer Head T-nuts

Downloads
170
Likes
34
Rating
0
P
PrintablesSauce

Voron 2.4 350mm Rear Skirt With Cable Cutout

Simple remix of the rear center skirt for the Voron 2.4 350. It has a hex pattern cutout to save on plastic. You can run your filament sensor wire or umbilical cable through it.

Downloads
158
Likes
24
Rating
5
P
PrintablesPetzi

Build plate holder 355mm (+350mm), SV08 / Voron (Wall mount option)

This is remixe of @addohm_141025 's Wall mounted build plate holder. I modified it for 355mm and 350mm build plates. There are two versions. V2 have more stability but needs some more filament. CAD at onshape…

Downloads
147
Likes
17
Rating
5
P
Printablespolykyri

Voron 2.4 350mm Skirt Power Switch Mod

The back power switch is hard to reach. This uses a .5" x .75" rocker on off switch

Downloads
145
Likes
20
Rating
5
P
PrintablesMichsiv

Side main switch for Voron 2.4 R2 350mm / 300mm

Side skirt for Voron 2.4 R2 350mm version with main switch. Second model is original back skirt with only AC input and covered hole of the original main switch. For those who has already printed back skirt, you can use a Switch cover so…

Downloads
139
Likes
29
Rating
5
P
PrintablesChar

Filament Buffer for 350mm Vorons

Inspired by the remix from Drakka01, completely rebuilt using the parts from Karkovski. I was having trouble with finding a buffer for my 350mm Voron V2.4r2 that was large enough to deal with the over 100cm of filament. I wanted something…

Downloads
137
Likes
34
Rating
5
P
PrintablesMY TECH REVIEW

ERCF V2 Top Mount 500mm Extrusion for Voron 2.4 350mm

This mod is to be use with 500mm extrusions that are easier to buy without custom orders. I also gave it more depth inside to grab more of the extrusion and be more steady. This is for the Voron 2.4 350mm version. The extrusion that I…

Downloads
134
Likes
18
Rating
0
P
Printablesron

Large spool holder (300mm or 350mm diameter - 2.5, 3.5, 5kg). Smooth rolling.

Large spool holder. PTFE contact. No spool swinging. Maximum spool size is 105mm width at the axis. There are two configurations. One is for 300mm max diameter spool, then usual 2.2kg spool fits ( SpoolHolder-rxxx - d300-I3D-1). The other…

Downloads
130
Likes
14
Rating
5
P
PrintablesJD_AUS

Stealth Press MGN12C Arm & extensions for 350mm or 400mm rails.

I really like this model, particularly as I didn't need to purchase anything except the Keybak. I was able to use all stock that any Voron enthusiast likely has sitting around. Printed in eSun ABS at 248/110, 40% infill with the…

Downloads
119
Likes
18
Rating
0
P
Printablespolykyri

Voron 2.4 350mm Front Skirt with Power Switch

I wanted to add a power button to the front of my Voron 2.4 350x350 since the printer is so large and it is hard to reach to the back. I kept my original power switch in the back and changed the stock skirt to have a space for either a ½"…

Downloads
114
Likes
16
Rating
0
P
PrintablesMagnus Wohlfart

Voron 350mm Buildplate Storage Holder

New version for up to four 350mm buildplates, plus added Voron logo ;) Accordong to Voron Design licensing, this is also GNU GPL 2.0

Downloads
112
Likes
20
Rating
0
P
PrintablesJuniper Rueter

Voron 2.4 exhaust CAN cable route for 300mm and 350mm

Works with either the original or my modified mount to work with stock panels Print 2 of the correct length for your printer, models are pre-oriented

Downloads
109
Likes
10
Rating
0
P
PrintablesExerqtor

Voron 2.4 & Trident 350mm Canopy

Canopy fan blockoff plates CHANGELOG: 30.03.2024: Initial release. Description: I didn't want to re-print the rear corners of "JSmith17's Canopy" in case I eventually add exhaust fans, so I made these blockoff plates instead. Pictures:…

Downloads
109
Likes
21
Rating
5
P
PrintablesTDX3D

Beefy Wire Duct for Voron 350mm (Ryandam Remix)

These cable ducts have been re-created to accommodate an inverted electronics setup on a 350mm Voron. They are also thicker all around to prevent breakage which I found happened a lot with the original design. The slots have also been…

Downloads
108
Likes
34
Rating
0
P
PrintablesDavid Holecko

CLAMP HOLDER 80x350mm

CLAMP HOLDER 50x300 https://www.printables.com/cs/model/752981-clamp-holder CLAMP HOLDER 120x400mm https://www.printables.com/cs/model/828691-clamp-holder-120x400mm

Downloads
107
Likes
13
Rating
0
P
Printablespolykyri

3 Switch Skirt - Voron 2.4 350mm

This is a modified skirt where you can add three power buttons. You can have separate control of the printer power, pi power and LED. I used 10 amp ½ inch x ¾ inch switches. Soon I will publish the 2 switch and single switch version

Downloads
99
Likes
25
Rating
5
P
PrintablesFizzy

FT EMS Voron 2.4 350mm (LDO Laser Cut)

INTRODUCTION Not a fan of DIN rails and VHB tape - Sorry Voron Design team. You are in the right place when it comes to Electronics Management Systems aka FT EMS. This is our single piece acrylic laser cut FT EMS frame that fits onto the…

Downloads
90
Likes
18
Rating
5
P
PrintablesGFresh

Voron 2.4 350mm Rear Skirts with Hex Infill

A remix to suit my needs. I wanted these parts to match the shape of the original Voron release parts I had printed.

Downloads
90
Likes
9
Rating
0
P
PrintablesDrakka01

Filament Retract Bank remix for Voron 2.4 350mm

Main changes: ECAS version only Buffers around 1000mm of filament. The M5 holes line up with the top and bottom 2020 extrusion on 350mm Voron. All captive nuts changed to 4mm M3 heat inserts. I also modified a lot of the holes on the…

Downloads
86
Likes
47
Rating
5
P
PrintablesDeniolan

RevoPoint Dual Axis Turntable - 350mm extension plate with vertical scanning hips

I wanted a slightly larger turntable plate for the Dual-Axis scanner included in my RevoPoint MetroY Pro kit ( https://amzn.to/4qK292l ). The turntable is the one in this listing -> https://amzn.to/4tOGvfM - out of the box, it features a…

Downloads
83
Likes
13
Rating
0
P
PrintablesSmokescreens

voron v2.4 350mm insulated enclosure panel clips

i got tired of the 360 degree view of my abs parts warping off my bed due to lower than optimal chamber temps. in my room my chamber temps topped out at 58C. larger abs prints warped off the bed or warped the spring steel print surface…

Downloads
82
Likes
55
Rating
5
P
PrintablesBernd

Revopoint Miraco Turntable T-125 extension 350mm /Drehtellererweiterung auf 350mm

Adapter for extending the Revopoint Miraco T-125 turntable to 350mm. 3D Markers with a diameter of 7mm and a center marking are integrated on the plate (multicord print wit Prusa XL).Adapter with thread for screwing onto a tripod to use…

Downloads
76
Likes
15
Rating
0
P
PrintablesDocHopper

Voron 2.4 350mm Top Mount Electronics

My Voron 2.4 350mm weighs a lot and I wanted make it easier to work on them. I made these skirts to allow me to mount some DIN rails on the top panel so this is not a tophat mod, so don't print them looking for one. This is just for…

Downloads
73
Likes
21
Rating
0
P
PrintablesDerek Sheedy

Voron V2.4 350mm Rear Skirt with Keystone

Voron V2.4 350mm rear skirt with 6 keystone slots.

Downloads
68
Likes
9
Rating
0
P
PrintablesFreddy

350mm V-Slot Covers for 20 and 40mm profiles

made them to hide the cables on my ProForge printer. I printed with 0.5mm width

Downloads
67
Likes
3
Rating
0
P
PrintablesVoxel3D_NL

Voron 2.4 (350mm) skirt with power outlet

Adaption of the left-rear skirt, to include a female C13/C14 power connector to power other devices. I have made it because I want to power on my separate air filter unit with the SSR within the Voron machine. This makes it possible to…

Downloads
67
Likes
7
Rating
0
P
PrintablesJackmiller

Voron 2.4 Draftshift/Toolchanger 350mm Build Extended Full Skirt Bottom Frame

This is an Modded Skirt is for an Voron Draftshift/Toolchanger, with an Extended Y frame of 100mm. And Front 2040 Extrusions. The Front Motors Are Extendet For 2040 Extrusions. Frame Must be Extendet in Y about 100mm Front Motors needs to…

Downloads
62
Likes
15
Rating
0
P
PrintablesKiiiddd

Clicky-Clack 350mm Thicc skirts With Mesh

Will Require a Multi-Color printer or 4 Manual Filament changes as you see the side of the skirts so you will definitely see the color change line if you do it the change at layer line. In Orca you will want to go to the object list and…

Downloads
58
Likes
13
Rating
0
P
Printablesaubutus

Voron 2.4 350mm Skirts with honeycomb

Bonjour, voici mon premier projet pour intégré une grille en nid d'abeille dans la jupe de la voron 2.4r2. Les pièces ont été collé au pièces standard de la jupe. Les pièces ont été imprimé en respectant les préconisations de Voron.

Downloads
57
Likes
7
Rating
0
P
PrintablesGoyetus

Bear Y axys - linear Rail - 350mm or 365mm - MGN12

Original files for 365mm here: https://www.thingiverse.com/thing:4095548 As the original ones, it pass the Y test from prusa. I remixed this model to make it compatible with 350mm Linear Rail. Working perfect :)

Downloads
48
Likes
8
Rating
5
P
PrintablesFluffynuts

Voron 2.4 350mm flex plate guide

I use four m3 x 8mm and four m3 hammerhead t nuts for securing it to the rails behind the build plate.

Downloads
47
Likes
10
Rating
0
P
PrintablesManolito

Voron2.4 300mm bottom Panel Vibration Damper (350mmVersion in Progress)

Bom: 23 x M3 x 8mm (maybe 8-10mm fits too) 23 x M3 Hammer Head 3mm diameter: https://de.aliexpress.com/item/1005002559740906.html Matched this Z-Belt Covers: https://www.printables.com/de/model/479809-voron-24-z-belt-covers Link to the…

Downloads
45
Likes
16
Rating
0
P
PrintablesShadowLiger

Revo Nozzle Bay 01 and 02 for Voron 2.4 350mm (Remix)

Inspired by Several e3D Revo holders while looking for a solution for my Voron v2.4 350mm I wanted to have 2 bays (right and left) and wanted them labeled to be consistent with the "aesthetic" of my industrial themed (yellow, Black,…

Downloads
44
Likes
5
Rating
0
P
PrintablesMoosalot

Flat Mesh Rear Skirts -Voron 2.4 - 350mm (Cura Ready)

A remix of Thejiral's amazing Voron flat mesh skirts, but redone for Cura users, the mesh is built into the model. Various versions of the backplates, power, blank, and two types of keystone insert parts, as I found the normal one didn't…

Downloads
43
Likes
8
Rating
0
P
PrintablesBrian Johnson

Voron 2.4 poop tray, 350mm

Voron 2.4 poop tray, 350mm held with 6x3 magnets great for putting the purge lines in

Downloads
43
Likes
11
Rating
4
P
PrintablesBenRTS

Voron LED diffuser 350mm

Remix for 350mm for LED Strip Holder for Voron 2.4 by FunFunBoy

Downloads
42
Likes
9
Rating
0
P
PrintablesKl3k

350mm (13.78") Guitar Radius Gauge

A little radius gauge for 350mm radius (13.78") guitars. Can be used to check the neck's radius but also for your string action setup.

Downloads
40
Likes
3
Rating
0
P
PrintablesChase

Troodon 2.0 Pro 350mm Canopy

40mm Canopy that allows for more Z height clearance. x12 45mm M3 screws are required. I also foam taped the top, bottom, and seams of each piece. Printed in ASA. Print 4 of any of the STL's to make the entire canopy.

Downloads
35
Likes
3
Rating
0
P
Printables3D Printiverse

Ender 3 LED Bar Holder (LED Space 350mm x 13mm)

Ender 3 LED Bar Holder with 350mm x 13mm LED Space inside! Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: Yes Supports: Yes Resolution: 0.2 Infill: 20% Filament: TIANSE PLA Black Notes: Chose BRIM instead of RIFT for…

Downloads
34
Likes
1
Rating
0
P
PrintablesDreamWebb

Voron V2.4 350mm Hex Mesh Rear Skirts Filtered Inlet

Mesh skirts i made for my 350mm 2.4. Couldnt find one with a filtered inlet

Downloads
33
Likes
3
Rating
0
P
PrintablesPatrico

Voron 2.4 350mm – Thicc Skirts Electronics Cover Clip Upgrade

This upgrade introduces the following improvements: Insert holes for M3 heatset inserts in both left and right Thicc Skirts (2 inserts per skirt, total 4), Enlarged clips to fill the 20 mm gap, allowing the lower electronics cover to be…

Downloads
33
Likes
6
Rating
0
P
PrintablesMoosalot

Flat Mesh Front Skirts - Voron 2.4 - 350mm (Cura Ready)

I remade the amazing front skirt design by Thejiral so it has the hexagonal mesh added into the design for those of us that only use Cura. (Mainly because I'd rather challenge myself to make something work in Cura versus actually learning…

Downloads
32
Likes
7
Rating
0
P
PrintablesGrant Peters

Sony 70-350mm Lens Collar

IMPORTANT!! PRINT AND USE AT YOUR OWN RISK!! Please understand that this is a cheap piece of plastic that will be used to hold at least 1k worth of equipment. Use at your own risk. I saw that lens collars for this specific lens are about…

Downloads
31
Likes
2
Rating
0
P
PrintablesMog

Cryogrip 350mmx350mm plate for prusa xl

I use a "BIQU CryoGrip Pro Glacier 356x356mm Panda Build Plate for Voron 350" with my prusa xl. To better support in prusa-slicer go to printers tab General section Bed shape click set load xl.svg (comes from the prusa-slicer project and…

Downloads
30
Likes
7
Rating
0
P
PrintablesStefan

Filament Spulenhalter für 350mm Spulen

Filament Spulenhalter für 350mm Spulen der neben den Drucker gestellt werden kann. Die Spulen können eine Breite von 110mm (120mm sind noch problemlos möglich) haben. Aufgrund der mittigen Lagerung der Spule wird diese gleichmäßig…

Downloads
29
Likes
1
Rating
0
P
PrintablesRo3Deee

Prusa XL 350mm plate jig

PEY plates are perfect for printing TPU. The jig can be used to place a 350x350 mm plate, like this one from aliexpress: https://s.click.aliexpress.com/e/_on2kPGH Model includes a pin to secure the jig while placing the plate.

Downloads
28
Likes
12
Rating
5
P
Printablesfrauhottelmann

Flat Mesh Skirts Voron 2.4 remade in CAD 250,300,350mm

I wanted to modify the side skirts of the flat mesh skirts and decided to go all in with the remake in Fusion. @Thejiral made these in FreeCAD and the provided step file just loads forever. These are not a 100% recreation of their…

Downloads
28
Likes
10
Rating
0
P
PrintablesChase

Troodon 2.0 Pro 350mm OEM Grill

OEM Grill that you can print in any color you want, you will have to print 2 of each side sections.

Downloads
27
Likes
2
Rating
5
P
Printablesjattie

Voron 350mm LED COB Light Strip Mount

Voron 350mm LED COB Light Strip Mount

Downloads
26
Likes
4
Rating
0
P
PrintablesEdwinL

Voron 300/350mm Top Hat with Hinged Lid for Click Clack Doors

Update 9Sep26: Added Step and F3d files Update 10Sep26: CAD/STLs fix and BOM Update 25Sep26: Added 350mm size Coming soon: Printing instructions. TL;DR Getting this right in ASA or ABS requires a bit of care I couldn't find a top hat that…

Downloads
25
Likes
15
Rating
5
P
PrintablesChase

Troodon 2.0 Pro 350MM Slide Off Panel Mod

Rails that the panel slides into, so you don't have to take off all the screws. Side Panels: Use M3x6 to attach the rails and M3x12 for the top center screw that retains the panel. Botton Panel: Reuses all but one of the stock panel…

Downloads
24
Likes
5
Rating
0
P
PrintablesErik

E3CNC Extended XY Plates for 350mm 4040 profile

This mod allows one to reuse the included 350mm 4040 extrusion as is, without having to cut it to 300mm! Profile mounting face was moved back 25mm and up 10mm. Supports where extrusion is fitted are needed. Recommended to print flat it…

Downloads
24
Likes
6
Rating
0
P
PrintablesDrakka01

Insert Friendly 350mm Voron 2.4 Front Skirt

Remixed the 350mm left and right skirt to include a small cutout around the bottom row of hex holes so that insertables such as nozzle holders and mechanical buttons would fit better.

Downloads
23
Likes
6
Rating
5
P
PrintablespapstFish

Filament Buffer for 350mm Vorons - REMIX Roller 625ZZ

I am currently building the model by Char. --> Changed the hole dimensions of the roller to be abe to use 625ZZ bearings

Downloads
23
Likes
0
Rating
0
P
Printablesjoonizz

The 100 extended v1.1 Feet for 350mm Rods

When I built my The 100 Extended I couldn't find 330mm rods only 300 or 350 so I mad holes in the feet so I could use 350mm rods Please leave a like if you like them or comment if there is a problem so I can fix it!

Downloads
23
Likes
5
Rating
0
P
PrintablesMoosalot

Flat Mesh Top Hat for 350mm Voron 2.4

This top hat mod for a Voron 2.4 350mm adds 117mm to the height of the Voron, which is great for using an umbilical instead of the standard cable chain. It also allows for moving a screen to the top, along with the Pi., there's also a…

Downloads
21
Likes
14
Rating
0
P
PrintablesScott Jackson

8 Lane ERCF V2 Mount for Voron 2.4 350mm

I wanted a way to mount my ERCF to the top of my V2.4 without buying any aluminum extrusion or removing my side handles

Downloads
21
Likes
3
Rating
0
P
PrintablesTVHS

Lid riser block / Canopy for Troodon 2.0 Pro 350mm printer

In order to reach the full 330mm height capacity claimed by Troodon the 2.0 Pro needs some spacer blocks to rise the lid so that the bowden tube doesn't get bent up against it. I've designed these blocks to do the job while using not too…

Downloads
21
Likes
8
Rating
5
P
PrintablesLuomo
Downloads
21
Likes
6
Rating
0
P
PrintablesSmart Ostrich

PCB Hotkey Buttons Voron Fystec Flat Mesh Skirt 350mm (development)

Warning this has not yet been tested. Printed, but not tested. Currently developing the idea. Appreciate any input. Print with honeycomb infill, 0 top and bottom layers.

Downloads
20
Likes
4
Rating
0
P
PrintablesPurchenZuPoden

Revo Nozzle Holder Voron v2.4r1 350mm

This is a Remix of Baccula's Revo Nozzle Holder for Voron v2.4 (https://github.com/VoronDesign/VoronUsers/tree/main/printer_mods/baccula/revo_skirt_nozzle_holder). I changed the skirt to fit my voron 2.4r1, wich has a slightly different…

Downloads
20
Likes
4
Rating
0
P
PrintablesNixGuideTo

Voron 2.4 Print bed spacer for 350mm build jig

this is just a tool i printed to ensure i was getting the correct spacing on my print bed for the voron 2.4 350 mm build

Downloads
19
Likes
1
Rating
0

YYACF (Yes, Yet Another Co-Filament) Co-Filament Model for 350mm and Larger Beds

Before anyone asks, I made this in Blender rather than reworking someone else's project. Blender makes creating something like this a 5 minute exercise but it took me a bit longer because I'm still teaching myself blender. To print this I…

Downloads
19
Likes
0
Rating
0
P
PrintablesDave_Rowland

Desk Drawer 350mm x 350mm with Gridfinity

Orignal model rescaled to 350mm x 350mm. Used perplexinglabs gridfinity generator to create a base plate Merged and sliced.

Downloads
18
Likes
3
Rating
0
P
PrintablesMuffelkraft

Modular Ceiling Swivel Base – Adjustable & Expandable Mount Ø90-350mm

This modular swivel base is a versatile mounting system designed for attaching devices or structures to ceilings or overhead surfaces. It consists of two interlocking halves: Base Dome: fixed to the ceiling with countersunk screws Swivel…

Downloads
18
Likes
4
Rating
0
P
Printablesdanec

Voron 2.4/Trident TPU Twist-Lock Deck Support (LDO 350mm)

Note: if you use my Deck Seal with Umbilical Clip , you don't need these supports. The Twist-Lock only supports the deck; the Deck Seal supports it and also seals it. This is a support component for the bottom panel (deck) of Voron 2.4 or…

Downloads
18
Likes
7
Rating
0
P
Printablesjonathon717

Voron 350mm +110mm Tall Top Hat

Extra Tall Modified Top Hat - 350mm Voron 2.4 and Trident This mod increases Z clearance height by 110mm and improves cable management (Can Bus / Umbilical style) by raising the top. Requires re-routed cabling and filament path (not…

Downloads
18
Likes
11
Rating
0
P
PrintablesKizzard

20x20 Cable Management Raceways 90mm to 350mm

Justin Thursday's beautiful cable management raceways are well designed but only come in shorter sizes. I have added additional sizes for easy printing of longer runs without needing to jump into CAD.

Downloads
18
Likes
1
Rating
0
P
PrintablesDev Limbu

Tall Planter (REQUIRES LARGE BUILD AREA minimum 350mm in the Z axis)

I created this planter for my wife's hanging succulents. It does require a large build area in the Z axis, about 6.5 inches in the X and Y. about 15 inches in Z axis. I printer this with 15 % infill on my Anycubic Kobra Max. with a .4…

Downloads
18
Likes
2
Rating
0
P
PrintablesRhino

Mercury1 XY Joints for Voron 350mm gantry on E5Pro

Mercury1 XY Joints for Voron 350mm gantry on E5Pro

Downloads
17
Likes
2
Rating
0
P
PrintablesNoizie Works

Voron 350mm insulation Jacket

Proceed with caution! This is not a final or optimized file so expect some tolerance issue, it's a step file so mod away! The current file supports adding 3mm foam strips to the frame to provide a cushion between the plastic and frame.…

Downloads
16
Likes
8
Rating
0
P
PrintablesRedukt

Voron 350mm Canopy side handles - spool holder

The procedure is the same as for the original model. (https://www.printables.com/model/824550-voron-24-trident-350mm-canopy-side-handles) BOM (per side): Canopy sides: 2x M3x8 SHCS (I choose to use low profile ones) 2x M3 Roll-in T-nut…

Downloads
15
Likes
9
Rating
5
P
Printablesmx1m3DP

Bling Box - Sealed Gift Box (700x350mm approximately 27.5x13.75 inches)

This 3D print model is a unique and functional gift idea, designed to put a letter or a banknote. The box is made of PLA material and the front of the box is designed with a lattice-like structure, allowing a glimpse of the inside…

Downloads
15
Likes
1
Rating
0
P
Printableslakai

Voron 350mm V2.4 Braug Skirts

Braug Facade Skirts for V2.4 350mm.

Downloads
14
Likes
5
Rating
0
P
PrintablesVictorM27

Panels for the BeamCaseSFF 350mm

These are my panels for the BeamCaseSFF extended to 350mm because that is the length of my BeamCaseSFF (using 320mm aluminum x profile beams). these are inspired of some itx cases that exist on the market (ex: nanoq). Notes: -I use the…

Downloads
13
Likes
1
Rating
0
P
PrintablesBeBopBrit

LED Strip Diffuser For 350mm

I loved this design so printed it out but found my LEDS were too bright THIS IS ONLY FOR THE 350MM VERSION

Downloads
13
Likes
4
Rating
0
P
PrintablesAndrew Peters

350mm Voron skirt mod for 40mm extrusion

This is a modification of the original Voron trident skirt but modified for voron 2.4 with 40mm extrusion.

Downloads
12
Likes
9
Rating
0
P
PrintablesTeknikFrik

Gladiator NXT Desk Clamp (350mm bed needed)

Print in something stiff. I printed mine in ABS-GF25 but I suspect ABS/ASA or even PLA will be fine. The clamp uses a M5 heat insert on the inside of the clamp jaw. Use a bolt to pull the heat insert back down into the hole (You can't use…

Downloads
11
Likes
1
Rating
0
P
PrintablesBrandon Clark

Voron 2.4 350mm Onn Camera Mount

This camera mount was designed around the Onn Webcam. It will require disassembly of the original camera mount. Remove the rubber pad and you will find the screws to take apart. This mount will use the screw that directly mount the camera…

Downloads
10
Likes
1
Rating
0
P
PrintablesMichal Dolezal

ERCF Top Mount - Remix for 350mm Voron

Redesigned for 500mm 2020 profile on voron 2.4 - more robust construction + mounting jig

Downloads
10
Likes
3
Rating
0
P
Printablesroboots21

Voron 2.4 350mm Bed Alignment Stops

Voron 2.4 Bed Alignment Stop remix to accommodate a 350mm bed size. Per original model description, these are accessories that help accurately position and repeatably align the build plate during installation. These stops mount to the…

Downloads
10
Likes
1
Rating
0
P
Printables3DesignsCH

Table / Shelf Sheetholder 350mm

Simple sheetholder for two sheets to put under a table or shelf. Designed for 2.5-3mm screws, mini mum length 8mm. Print on the long thin side. Please post a make and leave a rating if you print it. :)

Downloads
10
Likes
3
Rating
0
P
PrintablesJoe

Gridfinity Refined Bolt Cutter Ace 350mm (14) 1x4 + 1x5 (set)

I have a series of tools that are on the larger side (1x9 - split by 1x4 and 1x5 sets) (see collection here and here ) and this is for a pair of 14" (350mm) bolt cutters.

Downloads
9
Likes
0
Rating
0
P
Printablessupercrossed

1050x350mm Ball Screw Printer

I'm working on a DIY 3D printer which uses ball screws for all axis, XYZ. With a large build volume of 1050x350x350mm. Early design stages, quoting custom beds and heaters from suppliers. Will continue to update this project as it…

Downloads
9
Likes
1
Rating
0
P
PrintablesMr.Maker

Stealth Skirts for StealthChanger and Clicky Clack Door 350mm Voron 2.4

Have a stealthchanger... good. Have a clicky clack.... good. Also like the stealth skirt design excellent then this is for you. Added a Push button hole to each front skirt as that's How mine is configured, Left side I use for LED's and…

Downloads
9
Likes
7
Rating
0
P
PrintablesAlex Chulzhanov

Voron 2.4 350mm Fridge Light Switch

Just like a real fridge, this modified skirt and trigger block allows you to add a switch to the fridge door that turns on/off your enclosure lighting when the door is opened/closed. The goal with this mod was to keep it as subtle as…

Downloads
8
Likes
5
Rating
0
P
Printablesslowdude

Voron Top Hat 350mm Frame 200mm tall

Print 4x of each file for a 350mm square Voron Frame, should fit 2.4 and Trident 350mm frames.

Downloads
8
Likes
2
Rating
0
P
PrintablesMike Rainbow

Voron 2.4r2 350mm Fan controller front skirt

i tweaked the front skirt to house a couple of fan controllers Category: 3D Printer Parts

Downloads
7
Likes
0
Rating
0