Counting matching models…
Made a quick logo for the End Gate of the Skid Steer Loader made by AN3DRC. https://an3drc.com/e-shop/construction-vehicles/tracked-skid-steer-loader https://an3drc.com/e-shop/construction-vehicles/wheeled-skid-steer-loader recommend…
I am giving back to the reefing hobby with a project I’ve been working on for the past couple of years—a fully 3D-printed modular frag scape system. My company, 3DReefing , is dedicated to innovative reef-safe designs. If you appreciate…
This project was inspired by Jan Olejnik's blog post How to build a cool & cheap 3D printed micro drone . I decided to design my own frame from scratch because: The article was written in 2018 and some parts suggested in the shopping list…
This is a remix of 3Drony v2.1 . The main difference is that this model is designed to fit: a Runcam split 3 lite , although it should also fit a Runcam split 3 Nano Whoop . a TBS Unify pro32 nano optinal: a Lumenier AXII 2 u.fl RHCP…
The UV Sweeper is Patent Pending and will be sold directly only through www.3DReefing.com Organisms like sand dwelling dinoflagellate's have plagued the aquarium hobby for decades. With the UV Sweeper you will be able to target eliminate…
The MicroTrackRC is a small 3d printed tracked vehicle. It is designed to be easy to print and assemble and use very cheap readily available electronics but still be a very fun project to build and drive. I printed all the parts on two…
This simple construction are for upgrading your K8200/3Drag to GT2 belt on X axis. It is a direct replacement, reusing the original mount screw and holes, adding the missing belt tension. For complete upgrade of X axis to GT2, you need:…
#3DrukdlaWOŚP Inny projekt - https://www.thingiverse.com/thing:4859291 Jest to logo WOŚP do wydrukowania Polecane ustawienia: 20% infill no-support 0,4 mm nozzle; 0,2 mm layer height Wydrukujcie jak najwięcej i zanieście do najbliższego…
This simple construction are for upgrading your K8200/3Drag to GT2 belt on Y axis. It is a direct replacement, reusing the original mount screw and holes, adding the missing belt tension. For complete upgrade of Y axis to GT2, you need:…
This LCD cover is designed for RichRap's Delta 3DR but it may work with other printers changing the holder part. The LCD itself is available at RepRapDiscount: http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller ) and…
Had some free time and surfed reddit, this happened. It's remix of 3DBenchy and The Rock's Head . Not being by my 3D printer for some longer time now, so I decided to put this just as .STL without trying to print it (unfortunaly).
40mm fan mount for the All-Metal E3D v6 Hot-End to Velleman K8200/3Drag standard filament extruder. Fan duct snap on reusing original extruder screws and spacers, optimized for robustness and easy print. The 40mm fan is more quit than the…
This is not a mod for the faint of heart, it requires an almost complete disassembly of the printer base frame. And probably a lot of swearing and frustration, but I am quite pleased of how it turned out. I am marking it as a work in…
This is a keychain modelled after a Ford Fiesta mk7 (2008-2011) 3dr model. No specific print settings, as it just is a simple model. You can adjust the size as you like.
This is my take on the challange to design the best wheels for Maker's Muse wobbly wheel robot. (They don't actually have to be wobbly.) I went for a more traditional wheel design but with only the ridges being solid. This is to keep it…
An K8200 / 3Drag enclosure for the RepRap Full Graphic Smart Controller . It was my design goal to achieve a solution with as few components as possible and preferably without screws. In the design process, my goals were achieved, but the…
This is the Microdrift 1/28 scale RC drift car by 3Drcnc Projects. This projects is perfect for some indoor RC fun! It is a small quick project that can be printed in a couple of hours. The design uses cheap electronics that are readily…
Blank Cover for the 3DR SOLO Gimbal Bay. Protects the Bay when flying without the Gimbal Attached. Step File has been provided to allow others to modify and create covers for other gimbles
30mm fan mount for the All-Metal E3D v6 Hot-End to Velleman K8200/3Drag standard filament extruder. I liked the original fan duct and mount from E3D-Online and wanted the Hot End to mount on the original K8200/3Drag extruder using the…
This is a base setup to create modifications on this printer. I converted many parts from the OBJ model of http://www.thingiverse.com/thing:203292 but, many of them have been measured by hand. It have been made on Catia V5, aprx 20 hours…
PioCreat AFU Adapter for Formlabs & 3DRS Resin Bottles I suggest printing in PLA (as it doesn't melt when exposed to resin). Print with 0.12mm layer height (0.4mm nozzle is fine) 3 walls 3 top/bottom layers 15% infill is plenty Print as…
This is a K8200/3Drag frame mounting clip with locking screws. It is based on my redesigned of the K8200 Frame Wire Clip On . Next step will be to use the clip in other designs there could benefit from the more secure frame clip. This…
This collection comes with a base plate that mounts to screw holes on the bottom of the 3DR Solo while still allowing the gopro gimbal to be attached. Additional plates can then be stacked using common m3 spacers as seen in the photos. I…
K8200 and 3Drag filament guide with one bearing. The parts can be printed, except for the bearing and the countersink wood/plastic screw 3x25mm. Update: Version for both bearing 6000ZZ and 608ZZ (skateboard bearing). The larger bearing is…
I don't usually print stuff without a purpose. I print useful parts for printers, other hobbies or my house. So when I designed my maker coin I didn't want it to be a piece of plastic with no use. This is my maker coin and it has a lot of…
Simple K8200 and 3Drag frame snap on clips to hold the wiring as a replacement for the nylon strips. Based on BVD2e's model http://www.thingiverse.com/thing:444323 with few modifications. Update: Added variant with three profiles and STEP…
Hello dear maker! after a long search on thingiverse i've found this nice fan: http://www.thingiverse.com/thing:814286 . The problem i encountered was, that there wasn't any holder(for a K8200 / 3drag) for this fan at all! So i've decided…
Upgrade parts for the K8200/3Drag extruder to enable use of 3mm flexible filament such as NinjaFlex and TPE (shown in blue). Teflon tube in each part ensures a non stick filament feed. >> If you like it, please leave a like, rating or a…
The original kit has too much wobble on the Z axis, resulting in shifting and uneven layers. This design is for a minimal but rigid Z axis, using a trapezoid lead screw. There are only changes to the original design, where needed. The new…
This simple construction are for upgrading your K8200/3Drag to GT2 belt on Y axis. It is a direct replacement, reusing the original mount screw and holes, adding the missing belt tension. For complete upgrade of Y axis to GT2, you need:…
If you are using the 16T GT2 pulleys on a K8200/3Drag The belts will collide, and the Y belt will rub on the smooth rods of the X axis. To provent this, you can use this mod that raises the Y axis by 12mm. This way the Y belt will be…
I've had some problems with ripples in my prints or even missed steps. After some investigation and experimentation I found out that the reason seems to be the sturdiness of the y-axis linear bearing holders - or rather the lack of such.…
A common Housing for a Velleman K8200/3Drag Controller and a Raspberry Pi with Camera (especially for octoprint) Take the webcam housing and the cover from here: Raspberry Pi Camera Housing Attach controller and Pi with short 3 mm pan…
The end stops for X and Y axis are difficult to adjust as they tend to get loose when unscrewed. The original two screw construction is complicated and I made this simpler "one screw" replacement for the axis. There is no need for precise…
I wanted a metal bucket and I cant weld thin aluminum sheet. Modified the original bucket file to accept a 1mm aluminum sheet while retaining the overall appearance of the original bucket. Will Need: 12 - 3mm x 6mm cap head screws 12 -…
Simple holder for Dual Flex3Drive for Ender 5. I was told Ender 3 uses same carriage so this might work for Ender 3 too but I have not tested, if you do test please comment. Printed in PETG but any material should work (stiffer the…
Correct bed leveling is essential for good prints - Marlin firmware now has this awesome feature of measuring the bed and automatically adjusting the Z axis when printing. As this YouTube video demonstrates. I had a small used 8mm…
This is a simple adaptor piece to fit the Flex3drive G5. It suits the Seckit SG-GO, but will likely also fit any machine with a Bondtech BMG and E3D V6 combo. M2.5mm brass threaded inserts need to be melted into the three mounting holes…
This is an alternate way to mount a RAMPS 1.4/Arduino Mega 2650 board to the RichRap 3DR using the 8mm threaded rod and M8 nuts for the spool holder instead of the 3mm stand-offs in the electronics mount which were weak and didn't fit the…
This pack contains my customized Flex3D mount for Railcore II. It contains: -G5 base with integrated mounting bracket Allows lightening up the gantry, lower the filament path to an absolute minimum, and gain over 10mm in Z travel. Also…
Will Need 2 - 80mm M4 spacers 2 - M4 x 10mm socket head 2 - M4 x 16mm socket head
I wanted to mount the case side ways, so I made my own mount. BOM: 1x M5 threaded insert 2x M3 threaded inserts 2x M3x10 screws 2x M3 washers 4mm drill bit drill Instructions: You need to drill the holes with a drill bit. Just hold on the…
Disclaimer: I am in no way affiliated with Flex3Drive Ltd. or Mutely3D This is a free public domain model. No warranties, no guarantees, the usual stuff. The Flex3Drive for Ultimaker Oringinal https://flex3drive.com/flex3drive/f3d-umo/…
ClipOn Fan mount for standard 5015s (50x15mm) centrifugal fan used in many 3D printers today (as Prusa i3 MK2). Mount is the blue part on the picture. The cooler fan that comes with the K8200 kit is far from optimal - with unfocused part…
Mounts the Bulldog XL Extruder rock solidly to the Z-bar of the K8200. Inspired by this . I wanted a simple solution that's ridiculously rigid, and at the same time doesn't force you to disassemble the printer; and this is it.…
Completely redesigned in OpenSCAD to lower the base of the hotend and make it easier to fit a slot mount hotend in place of the original Updated to easily switch between 3 and 1.75mm paths, and to replace steep overhangs with small…
I don't know if it's printable, because my best printer has let me down and needs to be fixed. Find out and give me feedback
This is a mount for a 18mm inductive probe. It will mount the probe behind the extruder using 1x M5 screw and nut, so you will have enough clearance to add whatever you want. Print Settings Printer: K8200 Rafts: No Supports: Yes…
X-Carriage (for Wanhao Duplicator I3, Malyan M150 and similar I3 clones) that can carry dual flex3drive extruder drive. source "files" (onshape) I'm using this flex3drive dual driver with 2 hexagons (one 1.75mm other 3.00mm) and am now…
The Yeasu FT-3DR does not come with a docking station, you have to buy that seperately. When you get it, it does not have a flat metal base that you can easily put something like Dycem on instead they stamped 4 feet into it but 4 metal…
Custom made mount plate to fit the stock hot-end in the twotrees Sapphire-S 3D printer and allow a Flex3Drive extruder to connect to it. The cut-out lip is needed to accommodate this hot-end mount Print Settings Printer: E3D BigBox Rafts:…
The print quality of my E3D delta printer had gone progressively downhill. I investigated and discovered that the hot-end was not being tightly held in its bracket. Instead there was a significant amount of lateral play causing layer…
Lift your hexaxopter an addition 5cm to give more clearance for a camera. Probably better in ABS. The blender stl needs to be re-sized to 61cm across. You will need to drill the lower hole as I could not get blender to create one with the…
Piezo disk assembly for the flex3drive module for modular X-carriage . Intended to be used with Precision Piezo electronics and disk. print secure the piezo disk in the flat ring (20mm piezo disk holder.stl) flat ring goes directly under…
The is a mount for a genuine E3D v6 all metal hotend and E3D Titan extruder for the Velleman K8200 / 3DRAG 3D printer. Only one part is required to mount the hotend and extruder, but I also made a modified mount for the fan duct produced…
What is this? A rig to mount a small 9G RC servo, with an arm mounted Z-endstop, next to the extruder on a K8200/3Drag to enable the Auto bed leveling feature in recent Marlin . I had to modify the probe holder by zenmaster a bit to…
This is the MinimOSD 3DR OSD Case by Stanleykuenzle, with a modified Case Top with holes for VTX and Camera Plugs coming out of the top as well as a Hole for the MinimOSD Reset. I make no claim to the design and creation of these files.…
Phone stand/tripod with press fit area for 1/4"-20 UNC bolt for attaching ball head or other compatible phone holders. This can also be used for small cameras just attach your ¼"-20 UNC compatible mini-ball head, phone clamp/holder or…
As promised back when I threw together The Scorpion ( http://www.thingiverse.com/thing:1686696 ) I have come up with a full-featured carriage (and extras) package for the flex3drive dual (…
I modified http://www.thingiverse.com/thing:395908 added lightening holes and slot for mounting with clamp Instructions Frame is for mounting left and right, fix with clamps 180x4.5 mm. To mount without any problems at the bar, slightly…
This is a small brackets that slides into the Extrusion of a Velleman K8200 or 3Drag 3D printer. Is allows an M3 nut to be inserted into the back and then an M3 bolt to be inserted from the front, allowing accessories to be mounted to the…
A better fan holder to improve the quality of your 3Drag prints.
The standard 3Drag z-axis endstop is pretty inacurate. Just by moving the screw a little to the side, you'll change it's angle and screw up the z zero position - kind of literally. This improved endstop screw holder let's you place two…
It rotates smoothly to allow filament going into the bowden extruder. Fully compatible with all kind of spools just changing the printed cylinder or even not using it. BOM: printed platform part (of course) 1 x 10cm M8 threaded rod 1 x…
This is a custom version of the Flex3Drive Lite ( https://flex3drive.com/ ) It has been modified to accommodate my modular latching system and a PTFE filament feed line. The hardware kit is available from the flex drive website. NOTE:…
Clip fermacavi per stampante 3d K8200 / 3DRag da: 5 mm 10 mm 15 mm Category: 3D Printer Accessories
I wanted a metal bucket and I cant weld thin aluminum sheet. Modified the original bucket file to accept a 1mm aluminum sheet while retaining the overall appearance of the original bucket. Will Need: 12 - 3mm x 6mm cap head screws 12 -…
Will Need 2 - 80mm M4 spacers 2 - M4 x 10mm socket head 2 - M4 x 16mm socket head
