Search results: 40v

Sort order

177 models

P
PrintablesSimple3D

RYOBI 40V Pass-Thru Charging Adapters

I was pretty disappointed with the RYOBI 1800W Powerstation. It didn't come with MPPT Solar charging or even Pass-Thru charging. I was curious if this was a limitation of the 40V battery or just the Power Station. After some quick tests,…

Print approx. €2.43–€2.97 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
889
Likes
112
Rating
4.86
P
PrintablesSimple3D

RYOBI 40V 300W Inverter Regulated 13.8VDC Socket Upgrade

Ryobi makes several AC Inverters and USB chargers. The 40V battery RYi300BG is nice because it has a 300W Pure Sine wave inverter, a USB Type C port 5/9/12/20 VDC rated at 2A, and a USB type A port rated at 3A. Unfortunately it doesn't…

Print approx. €3.19–€3.89 excl. taxPreliminary estimate for one variant

Downloads
51
Likes
9
Rating
0
P
PrintablesOkcazure

Ryobi 40V Battery Holder

NOTE: Imported from Thingiverse with minimal updates to description but none to design… I recently purchased a Ryobi 40V weed wacker with expand it capability as my 10 year old gas model was no longer working great. Since I have one more…

Downloads
1,931
Likes
282
Rating
4.87

3DOM Makita LXT (18V) / XGT (40V Max) 4xBattery holder

Makita battery holder for four batteries. Works with 18V (LXT) batteries and 40V Max (XGT) batteries. A remix of Jerry's single holder. Supports only required from the built plate to support the joint tags. It can be done without supports…

Downloads
728
Likes
62
Rating
5
P
PrintablesplationiX

Makita XGT 40V battery holder

Makita battery holder with a secure fit. I designed it for a 2.5 Ah battery, as that’s the size I have. I’m not sure if it fits larger batteries. It prints without supports. V2 and V3 have flat sides for easier alignment or for aesthetic…

Downloads
575
Likes
49
Rating
4.75
P
PrintablesJPMakesStuff

40v side-by-side adapter compatible with Ryobi 18v

Updated 05/22/2025 Allows for the use of two Ryobi 18v batteries in place of a 40v battery. Suggested print settings: - 0.20mm QUALITY - PETG (pictured using OVERTURE PETG Grass Green ) - Infill density 20% - Infill pattern Grid - 3…

Downloads
543
Likes
113
Rating
5
P
PrintablesSimple3D

Ryobi 18V to 40V Battery Adapter

Ryobi makes several AC Inverters and USB chargers. The 40V battery RYi300BG is nice because it has a 300W Pure Sine wave inverter, a USB Type C port 5/9/12/20 VDC rated at 2A, and a USB type A port rated at 3A. The only down-side is that…

Downloads
500
Likes
43
Rating
0
P
PrintablesPhysics Dude

Ultimate GreenWorks (40V) Battery Adapter

I was not satisfied with the available battery adapters for use in my tiny electric go-kart build. I needed something stiff that I would never have to worry about. Designed for the 40V series of Greenworks batteries. Features polarity…

Downloads
472
Likes
46
Rating
5
P
PrintablesKevin Micallef

Ryobi 40V Battery Holder

For stronger holders, print flat with supports. If printed vertically where you don't need supports you end up putting the weight of the battery on the layer lines and you could blow out the bottom of the holder. Thx Okcazure for the…

Downloads
449
Likes
74
Rating
5
P
PrintablesJustinline

Ryobi 40V Battery Holder

This is a storage solution to hold your Ryobi 40V batteries. It's a bit over-engineered and more beefy than other options out there. I have some 6aH batteries that are really big that this model holds with ease. It will also fit all 2aH…

Downloads
437
Likes
46
Rating
5
P
Printablesgnomes

Ryobi 40v 4ah Battery and Charge Holder

Holder for a 40v 4ah Ryobi battery and the slim charger

Downloads
407
Likes
96
Rating
4.83
P
PrintablesAaronOaks

Ryobi 40V Leafblower Wall Mount

A wall mount for the Ryobi 40V leafblower that contains a clip/slot mount (as seen in the pictures). This can vary between leafblower models. This was remixed from the referenced model to make it sturdily wall mountable. This is a…

Downloads
398
Likes
72
Rating
5
P
PrintablesShawn Perkins

Kobalt 40V blower battery release button

A battery release button for my Kobalt 40v Leaf Blower broke, and there are none online that I can find, nor does Kobalt (Lowes) sell replacements. I have created this in Blender, printed it in PLA and have since used it successfully.

Downloads
391
Likes
9
Rating
0
P
PrintablesBootStrap

Ryobi 40v Blower Hook

Small Hook for wall mount of Ryobi Whisper Blower 40v. I printed the hook part in 100% infill to make it as strong as possible. Also used PETG. Not sure if this was needed

Downloads
362
Likes
50
Rating
5
P
Printablesft.prints

v2.0 MAKITA ROUTER PACKOUT INSERT (40V XGT & 18V)

There are two versions, the first version is standard and can be cut to fit smaller printers if needeed ( in slicer cut recommended ) The second version is modified to fit Bambu P1 and X1 or printers with the sane print volume without…

Downloads
362
Likes
73
Rating
4.67
P
PrintablesOnelostcause

Ryobi 40V battery pegboard holder

Pegboard battery holder for Ryobi 40V batteries. One vertical holder and one 15° holder. They mount to the pegboard using Sy's Peglock system and the mounting piece can be download from their model page .

Downloads
358
Likes
52
Rating
5
P
Printablessleekster23

Ryobi 40V Charger mount / snap fit

Made this to mount the 40V battery charger from Ryobi. Remixed to allow you to take it off the wall without unscrewing if you needed to. Snap fit! Works great. Wall mount part allows you to screw it in without measuring. Remix of:…

Downloads
354
Likes
51
Rating
5
P
Printablesthedude386

Ryobi 40V Expand-It Trimmer Wall Mount

This mount allows the Ryobi 40v Expand-it trimmer to be hung from the wall with the trimmer head still attached. The only holder that I previously found for the Ryobi was for the power head only, but didn't have enough space to allow the…

Downloads
330
Likes
32
Rating
4.5
P
PrintablesMiGarro

Parkside Dual X20V Team batteries to Ferrex 40V Tool

Update 2024: Since it is impossible for me to control the printers, filaments and slicer settings of those who print my models and having been told that my model is not sturdy enough to withstand drops (it was not designed for that…

Downloads
311
Likes
33
Rating
1
P
PrintablesRStupplebeen

Ryobi 40V Blower Reduction Nozzle

I needed to inflate a raft and I had a Ryobi 40V blower. FTIJPI! I printed the first couple of layers to resize the part. I suggest you do the same and simply scale the part. I have also included the STEP and SolidWorks files as well. I…

Downloads
278
Likes
62
Rating
0
P
PrintablesA4O Labs

IKEA Skådis Greenworks 40V Battery Holder

Greenworks 40V Battery Holder for IKEA SKÅDIS System 04/27/24 UPDATE : I made a version 2 that now has the same alignment plugs as my other Skådis designs, for easier installation. Also threw in a Greenworks logo like the Makita parts. I…

Downloads
257
Likes
31
Rating
4.5
P
Printablesmenerso

Another Ryobi 40V Battery Holder

Nothing special but it works. Print vertical to prevent supports. I just used 15% infill and 2 perimeters with a .6mm nozzle. It is tough. If you want to edit the model, you can download or use OnShape -…

Downloads
249
Likes
20
Rating
0
P
Printablesgreecher

Makita 40V Battery Clip

A wall mounted clip for the Makita 40V battery system. Nothing special to print, as the overhang already has pre-included support. I printed it .4 nozzle/.2 height, 20% infill, no supports. As I live in Arizona, i printed mine in a heat…

Downloads
233
Likes
15
Rating
4
P
PrintablesRobC

40V Batteries mount v2 for Ryobi Link

Updated my 40V Batteries mount for Ryobi Link model by adding a 25 degree tilt to allow for easier add/removal of the batteries. This model allows you to hang three 40V Ryobi batteries using the Ryobi Link system. Printed at .30mm without…

Downloads
219
Likes
35
Rating
0
P
PrintablesRobC

40V Battery mount v2 for Ryobi Link

Updated my 40V Battery mount for Ryobi Link model by adding a 25 degree tilt to allow for easier add/removal of the battery. This model allows you to hang a 40V Ryobi battery using the Ryobi Link system. Printed at .30mm without supports…

Downloads
205
Likes
42
Rating
5
P
PrintablesJustin Herman

Ryobi 40v Battery Holder

Print 2 copies and then glue back to back. Printed in PLA on a Prusa XL

Downloads
195
Likes
27
Rating
4.5
P
PrintablesPanarea

Kobalt 40V Leaf Blower Wall Mount

Wall mount for Kobalt 40V Max 520 CFM Gen4 Leaf Blower

Downloads
194
Likes
13
Rating
5
P
PrintablesGameRank

Ryobi Cutting Blade for 40V Trimmer

Project Overview: 3D Printed Replacement Blades for Ryobi 40V Trimmer Background: While clearing thick, tall grass and weeds on a wooded property, I initially used the Ryobi 40V trimmer with the included trimming line. However, the line…

Downloads
191
Likes
25
Rating
0
P
Printablesashizaru

Makita XGT 40V battery holder

Makita battery holder with a secure fit. I designed it for a 2.5 Ah battery, as that’s the size I have. I’m not sure if it fits larger batteries. It prints without supports. V2 and V3 have flat sides for easier alignment or for aesthetic…

Downloads
189
Likes
14
Rating
5
P
Printablesjwclinton

Ryobi 40v Battery wall hanger

This will print up vertically without any supports. The ones in my pictures I've printed by splitting them diagonally between the screw holes on a printer with insufficient z height. I glued them up with CA glue and they are holding up…

Downloads
189
Likes
16
Rating
5
P
PrintablesJustin Herman

Ryobi 40v Battery Holder

Printed in PLA on a Prusa XL Allows you to carry Ryobi 40v batteries like a lunch-pail.

Downloads
188
Likes
38
Rating
5
P
PrintablesMadMax

Ryobi 40V Battery Mount (Under Shel)

Includes Fusion 360 project

Downloads
183
Likes
35
Rating
5
P
PrintablesCapn Pantelones

Ryobi 40v Blower Mount (190mph)

See blower here: https://www.homedepot.com/p/RYOBI-40V-HP-Brushless-190-MPH-730-CFM-Cordless-Battery-Jet-Fan-Leaf-Blower-Tool-Only-RY404010BTL/316491295 Mount built for #8 1 1/4" screws available with drywall anchors here:…

Downloads
181
Likes
26
Rating
0
P
PrintablesRobC

40V Batteries mount for Ryobi Link

Check out my updated 40V Batteries mount v2 for Ryobi Link model. This model allows you to hang three 40V Ryobi batteries using the Ryobi Link system. Printed at .30mm without supports using OVERTURE Grass Green PETG. Portions of the…

Downloads
176
Likes
32
Rating
0
P
PrintablesBen Witten

Kobalt 40v battery adapter

Couldn't find a model so I made one real quick, using it to convert a powerwheels truck from 24v to 40v, used spade connectors glued into mate up to the positive and negative ports, added holes for ¼'x20 bolts to mount it, it's a snug fit…

Downloads
176
Likes
13
Rating
0
P
PrintablesJon Purkiss

Makita XGT 40v SP001 cover

Modeled with onshape, feel free to remix, link to my drawing is below. https://cad.onshape.com/documents/52dd3a7b840d64e9c8ea258c/w/a0fd00a7e60ab31e420b362e/e/53f1746f45fafb936a6825e7?renderMode=0&uiState=65be84c66471622ccbb0cf19

Downloads
171
Likes
20
Rating
0
P
PrintablesRoute3d6

Kobalt 40v battery latch

I dropped my leaf blower and the latch that holds in the battery broke. I submit my replacement, the kobold. What else would you expect from route 3D6? print 100%infill with supports on bed and sand the pins, I had to shoot some wd40 onto…

Downloads
168
Likes
7
Rating
0
P
Printablesvixvix

Makita 40Vmax XGT track saw arbor dust cover

Makita 40Vmax XGT track saw arbor dust cover, snag fit. I use PLA, should be ok with PTEG as well. It is not load bearing so feel free to use whatever quality to print. Support is needed for this version, but you dont need to remove it…

Downloads
167
Likes
15
Rating
0
P
Printablesgreecher

3DOM Makita LXT (18V) / XGT (40V Max) 2xBattery Holder

I took David's original model and modifed it by mirroring the side without the extra connection, ie just a 2x holder version. This suited my needs as I have a space where I can fit 2wide and several below, and wanted the softer edges on…

Downloads
166
Likes
18
Rating
0
P
PrintablesJoe-OSU-

Kobalt 40V Battery Holder Wall Bracket

Wall mountable holder for Kobalt 40V batteries. Designed to store my many Kobalt batteries up and out of the way by attaching them directly to some 2x4s along my garage walls.

Downloads
166
Likes
30
Rating
5
P
PrintablesRobC

40V Battery mount for Ryobi Link

Check out my updated 40V Battery mount v2 for Ryobi Link model. This model allows you to hang a 40V Ryobi battery using the Ryobi Link system. Printed at .30mm without supports using OVERTURE Grass Green PETG.

Downloads
165
Likes
25
Rating
5
P
PrintablesYangorang

Leaf Blower & Battery Slatwall Mounts for Ryobi 40V

A collection of mounts for mounting Ryobi 40V tools onto Slatwall. I usually store my leaf blower without the battery inserted, just in case the little nub that holds it up can't handle the weight, but so far it seems plenty strong…

Downloads
164
Likes
16
Rating
5
P
Printablesgreecher

Makita 40V Power Supply

This is a full build of a power supply based off my previous 18V version, but that again is off of Volon's original design for the 18V adapter plate. This had a whole new redesign of the adapter to fit properly to the 40V Makita Battery.…

Downloads
149
Likes
27
Rating
0

Bit holder for Makita XGT 40V Drills

This is a bit holder that fits the Makita XGT 40V max. drills DF001G/HP001G (U.S.: GFD01/GPH01). Holds 6 standard ¼" hex bits securely with 5x2mm magnets. Please read the following guide before printig. German version below. Hi! This bit…

Downloads
144
Likes
19
Rating
5
P
PrintablesWarglock

Atlas 40v/80v Battery Mount

I recently bought Harbor Freight's Atlas 80V lawn mower and wanted to mount it outside of the charger and tool so I made a wall mount for the battery. This mount should work for both the 40V and 80V batteries. I don't have the 40V battery…

Downloads
138
Likes
11
Rating
5
P
PrintablesJPMakesStuff

40v dual adapter compatible with Ryobi 40v

Updated 04/07/2026 same battery interface can be used to build either a single or dual battery adapter, added glue-in covers for the wire channel in either configuration. Allows for the use of two Ryobi 40v batteries in place of a single…

Downloads
138
Likes
22
Rating
0
P
PrintablesKokoBandit

Wide Nozzle for Ryobi 40V Leaf Blower

This is a wide nozzle attachment for a Ryobi model#RY40402 40V leaf blower. I made it to speed-up blowing leaves and grass clippings off the driveway. It replaces the original (round) nozzle that is included with the blower. I used two…

Downloads
135
Likes
24
Rating
0
P
PrintablesBootStrap

Hook for Ryobi 40v Expand-it Main tool

Simple Hook for Ryobi 40v Expand-it Main tool Printed PETG Infill Modifier around hook area to 100%

Downloads
135
Likes
23
Rating
5
P
Printablesgyrex

Ozito 18V PXC to Ryobi 36V/40V Battery Adapter

I hate the idea of having different batteries for different tools or being locked into a tool brand because you've accumulated their batteries. Ryobi have some great 36V gear (40V in the USA) and I wanted to use my existing Ozito/Einhell…

Downloads
126
Likes
25
Rating
5
P
PrintablesCrashdown

Stealthburner CW2 LGX Lite Mellow SB2040V3

A mod of the Voron Design Stealthburner and Clockwork 2 extruder designed to suit the Bondtech LGX lite / LGX Lite V2 extruder and Mellow SB2040V3 Canbus board. The Mellow SB2040V3 is quite different to the V2 designs and uses a new…

Downloads
123
Likes
15
Rating
0
P
PrintablesNinekill

Makita LXT 18V battery to Ferrex / Activ Energy 20/40V tool adapter

Fixed adapter from Makita batteries to Ferrex tools. The shape is specifically designed for hand 5W LED light. Contacts for battery are from aliexpres. The tolerances are low, so the contact block fits snug in the place. Between minus (-)…

Downloads
120
Likes
7
Rating
0
P
PrintablesTheSnootch

Kobalt 40v Battery Wall Mount Holder

I remixed this to remove some material, shorten print time and make it look a little nicer with chamfered edges.

Downloads
118
Likes
18
Rating
5
P
PrintablesRobert

Parkside Dual X20V batteries to Ferrex 40V Tool

Printed in 0.2mm in PETG The assembly is pretty self explanatory and everything is held together with 8 screws. The holes are threaded for M3 screws but fill free to use wood screws as well. This requires 3mm screw with flat heads - you…

Downloads
114
Likes
9
Rating
0
P
Printablesbostwickenator

Kobalt 40V Nozzle

This is a flat nozzle for lifting wet debris. It comes in 15 and 20 degree angle versions. As this blower is quite powerful there is a significant torque applied by the 20 degree nozzle. The area of the nozzle is 90% of the normal…

Downloads
114
Likes
14
Rating
5
P
PrintablesJmsOG

Black & Decker 40V max battery holder

Made this Black & Decker 40 volts max battery holder so i can easily store them and so they can stay at reach. I made these models based on the 40 volts max battery that came with my Black & Decker battery powered tools. The battery part#…

Downloads
113
Likes
9
Rating
5
P
PrintablesMoxL

Powerplus DualPower 20v 40v battery holder

Remix so I can use it as battery storage on the wall Holes are still there for the adapter, you can choose to not use them credit: Thingiverse remix of thing:4928771

Downloads
112
Likes
4
Rating
0
P
PrintablesSNE3D

kobalt 40v battery wall mount

This is a model I made to wall mount my 40v Kobalt batteries. I printed it vertically with 20% infill and no supports.

Downloads
111
Likes
12
Rating
0
P
PrintablesJEO

Ryobi 40V Whisper Blower Stabilizer

Designing around many complex angles was done by trial and error. If it looks a little cobbled together, it was, but it does give it better support from falling over on uneven ground. Downside: To remove the nozzle tube, the stabilizer…

Downloads
107
Likes
21
Rating
4
P
PrintablesXypher2000

Ryobi 40v Double Battery Carrier

Created this using initial design phase of the triple battery carrier, that I created for myself, because most people pr

Downloads
103
Likes
15
Rating
5
P
Printablesgoofballtech

Ryobi 40V Charger wall mount

I was looking for a way to mount my Ryobi 40V battery on the wall on the charger so they are being maintained. The only one i could find was this one on Amazon which is $20 US. So i threw one together myself. Acording to that page the…

Downloads
96
Likes
10
Rating
0
P
PrintablesAaronOaks

Ikea Skadis Ryobi 40V Battery Holder

An Ikea Skadis (pegboard) holder for Ryobi 40V batteries. There is also a mount on the side that the charger can be hung on. I designed and tested it with the 4ah battery, but higher capacity batteries should have a similar cross-section…

Downloads
96
Likes
23
Rating
0
P
PrintablesDmK

NEMA 240v Outlets Safety Covers

How to print Do NOT print these covers from ABS or PLA or other hard plastics that can break. If a prong breaks, it can get stuck in the outlet. You want something that can flex rather than break. I would think that TPU plastics with…

Downloads
94
Likes
5
Rating
0
P
PrintablesSeljD

Activ Energy 20/40V battery holder (ALDI / HOFER)

Battery holders for Activ Energy batteries usually sold in ALDI/Hofer. You can select between two types, one is for vertical and horizontal mounting, the other is angled 25° for easier access

Downloads
92
Likes
13
Rating
4.67
P
PrintablesPeg'd Products

Single 40V Battery Holder for Ryobi Link Wall Panels

Print in orientation as shown in Black

Downloads
92
Likes
21
Rating
0
P
Printablesjbuszkie

40v to 18v adapter compatible with Ryobi remix

I had Issue with JP's model. I couldn't get the cap to fit I also didn't have cap head 4mm screws. They were more button head. So I modified it a little. You will need supports. Thank's to JPMakeStuff for the original!

Downloads
90
Likes
14
Rating
4.5
P
PrintablesDznutz

Ryobi 40V Charger wall mount

Ryobi 40v (normal) charger wall mount. keep it out of the way when not in use. Print standing, no supports 10% infill .2 layer height Battery holder here

Downloads
89
Likes
12
Rating
0
P
PrintablesTreoWayne

Kobalt 40V charger wall mount

I have some Kobalt 40V cordless yard tools. Cordless tools need battery chargers. Kobalt's 40V battery charger works fine, but it doesn't have any keyholes for wall mounting. I came up with this. You will need to remove the four little…

Downloads
88
Likes
11
Rating
0
P
Printablesredaeq

Worx 40V Akku (WA3536) Halterung / Worx Accu Holder

This is an accu holder for the Worx Accu WA3536 Printed without support the way you can see in the picture replaced with version 2… fits better and is more stable

Downloads
87
Likes
7
Rating
0
P
PrintablesBodman3d

Kobalt 40V Battery Holder

I needed a way to manage and store my 40V Kobalt batteries. Print shown was completed in PETG. This held up fine in an unconditioned garage during a Georgia summer. I have these spaced 19mm/.75" apart. This allows plenty of room to pull…

Downloads
85
Likes
14
Rating
5
P
PrintablesBonticus

Hart 40v Charger Wall Mount

This model holds the Hart 40v battery charger horizontally for wall mounting. There is a loop for using a zip tie to fasten the power cable into the channel and there is a pocket to allow the strain relief to bend into place. The cap…

Downloads
84
Likes
19
Rating
5
P

Low Profile Ryobi 40v Leaf Blower Wall Mount

Designed a low profile holder for the Ryobi 40v Leaf Blower. The dovetails are loosely fit into the injection mold cavity and the wall mount is slid over them. Afterwards, the dovetails glued in place to get the fit right, I used CA glue…

Downloads
82
Likes
22
Rating
0
P
PrintablesXypher2000

Ryobi 40v Triple Battery Carrier

I created this because I need 3 batteries to mow the lawn. It was a pain to carry three batteries in my arms with the potential of dropping one. I printed this with a brim and standard support at 1% density (carrier only). Handle needs…

Downloads
81
Likes
23
Rating
4
P
PrintablesSimple3D

RYOBI 18V to 40V Converter and 13.8V Powerstation

These RYOBI 18V battery mounts can be bolted down. You can make different configurations to suit your need. I've also provided a 12V socket and switch holder models. For an example, I put together a 2S2P system that has a regulated 13.8V…

Downloads
78
Likes
15
Rating
0
P
PrintablesFslusarz

3d printer feet/riser for 4040v slot extrusion

Hi! i designed this feet for my ender 3 to fit psu in the horisontal position, just like in the ender 3 v2, but my problem was 92 mm silent fan which made psu was much thicker than normally so i designed my solution to this problem. I…

Downloads
76
Likes
6
Rating
0
P
PrintablesJameson42

Greenworks G-Max 40V battery holder for french cleats

Mount for hanging a Greenworks 40V battery on a 3/4" (or 20mm) french cleat. Prints well as oriented in the STL. No supports necessary, low infill. Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No Supports: No…

Downloads
76
Likes
17
Rating
5
P
PrintablesDznutz

Ryobi 40V battery wall mount

Ryobi 40V battery holder, slight wedge so the wall and clasp are not an issue, supports the weight of the 6AH battery no problem. Print standing, no supports 15% infill .2 layer Charger wall mount here

Downloads
76
Likes
7
Rating
0
P
PrintablesJammy

PWM Controller Box for HiLetgo 12V~40V 10A PWM DC Motor Speed Controller

I bought the Hiletgo PWM speed controller to change the speed of a 12 volt fan, but it does not include an enclosure box. It was only a bare PCB Board. This model will house the PWM controller using four pegs that will fit through the…

Downloads
72
Likes
5
Rating
0
P
PrintablesHenryhbk

Ryobi 40V Trimmer shaft cutting sleeve

I discovered when clearing really thick brush using the brush blades on the Ryobi 40V trimmer that the long grass would tend to wrap around the shaft at the flange above the head and would build up enough to stall out the head (see the…

Downloads
71
Likes
22
Rating
5
P
Printablesrichspencer71

Ryobi 40v Powerhead Hanger

Hanger for the Ryobo 40v powerhead. Hang your trimmer on the wall. Accommodates a 25mm to 26mm shaft. Hang without the battery attached. Print with PETG or ABS if your garage or storage area gets hot. reccomend minimum 30% infill, 4…

Downloads
71
Likes
8
Rating
0
P
Printablescorona

Ryobi 40V Battery Holder for the Honeycomb Storage Wall (HSW).

Print with supports standing up. Should only require a few supports and prints relatively quick considering it holds a huge battery. I printed with 15% infill and it holds up fine.

Downloads
70
Likes
10
Rating
0
P
Printablesjonafriendj

DeWalt 40v Max charger wall mount plate - No supports

DeWalt 40v Max charger wall mount plate. My charger is a DCB114 that came with an edger. I printed it with a .6 nozzle and added a 100% infill modifier around the screw holes. Probably not necessary but that's what I did.

Downloads
68
Likes
8
Rating
0
P
PrintablesA4O Labs

Honeycomb Storage Wall (HSW) Greenworks 40V Battery Holder

Update March 2024: I've decided to move from HSW to IKEA Skådis System . Stronger. Easier. Here's a battery holder for the Honeycomb Storage Wall system and the Greenworks lawn care line. It uses a plug to hold it firmly in place with…

Downloads
68
Likes
16
Rating
0
P
PrintablesJamesek

Box for electrical 240V sockets, 4-screw mount

This electrical box is designed for mounting standard 240V single or double sockets onto any flat surface, secured with four screws. It's reinforced for enhanced rigidity and safety. The mounting screws are spaced according to the…

Downloads
67
Likes
12
Rating
0
P
PrintablesBuckwheat469

Ryobi 40v Dual Battery Adapter

This battery adapter can be used to increase the power and improve the heat distribution with Ryobi batteries used in their 40v chainsaws. The biggest problem with their batteries is overheating when cutting larger logs. This adapter will…

Downloads
66
Likes
6
Rating
0
P
PrintablesJB

Activ 20V/40V Battery Mount with electrical connections

Walked into Aldi and came out with this very strange power tool battery that can power both 20V and 40V tools. So I obviously made a mount, and added connecting holes for the two positive and negative outputs with the plan to make an…

Downloads
66
Likes
5
Rating
5
P
Printableslromandine

Ryobi 40V Leaf Blower to Shop Vac 2.5 inch Adapter

Adapter to use 2.5" shop vac hose parts with a Ryobi 40V leaf blower. There are multiple Ryobi 40V leaf blowers, this was tested with Ryobi model RY404100. It will NOT work with model RY40480. I printed this in ASA with 100% infill and it…

Downloads
65
Likes
14
Rating
0
P
PrintablesReitangle

2 Channel 5V DC / 240V AC Low-Level Solid State Relay snap-fit case

Designed this tiny case with a snap-fit lid for a 2 -channel 5/240V Omron Low-Level Solid State Relay. It has been designed as a very fit, the SSR board and relay modules only just fitting inside. It is symmetrical with cutouts to access…

Downloads
64
Likes
4
Rating
0
P
PrintablesMadeBySaints

Battery Holder for Hart 6AH 40V Battery *UPDATED*

Made for the Hart 6AH 40V battery. Printed with 5 walls 15% gyroid Upgraded design! No longer features my personal logo on the side. Will now print in one piece standing vertical. No supports necessary. Screwholes properly aligned

Downloads
63
Likes
3
Rating
0
P
PrintablesA4O Labs

IKEA Skådis Greenworks Gen2 40V Battery Charger Mount V1

Greenworks Gen2 40V Battery Charger Mount for IKEA SKÅDIS System New V2 here! This is a Greenworks Gen2 40V charger mount for their line of yard tools (mower, leaf blower, etc) that mounts to the SKÅDIS pegboard with printed M2.5 T-Nuts…

Downloads
57
Likes
9
Rating
0
P
PrintablesBrytonU

Ryobi 40V Release Clip

The release clip broke on my 40V Ryobi battery that was past warranty. This print fits perfectly and I hope it helps!

Downloads
54
Likes
2
Rating
0
P
PrintablesDetour

Trimmer Wall Mount - Black and Decker 40V Max

Simple wall mount for a 40V Max string trimmer. You'll need to remove the battery for mounting. See my other designs for a battery mount. No supports. This should be OK with any filament you have - I used a roll of PLA in a color I didn't…

Downloads
53
Likes
5
Rating
5
P
PrintablesBradW

Greenworks 40V Blower Wall Bracket

Simple Wall Mount to hold the Greenworks 40Volt Blower. The blower just slides in. About 10hours to print. This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/lfCs7avPZTH Print Settings Printer Brand: Prusa…

Downloads
52
Likes
10
Rating
0
P
PrintablesJohn T

Ryobi 40V / Kobalt 40V Electric Blower & Trimmer Wall Hanger — Reinforced Base (PETG)

This is a reinforced remix of the original Ryobi 40V blower wall hanger. While testing the original design, I discovered it also fits the Kobalt KHB-3040-06 electric blower and Kobalt KST-120X-06 trimmer — great news if you run a…

Downloads
52
Likes
11
Rating
4
P
PrintablesLivid Squid

Kobalt 40V Wall Bracket - vertical stud mount

Summary Battery holder for Kobalt 40V lawn equipment batteries. The original has 4 screw holes ideally suited for horizontal mounting on either side of a 2x4. This version moves to 2 holes in the middle and includes recesses on the rear…

Downloads
52
Likes
3
Rating
0
P
Printablesclw

Ryobi 40Volt Battery and Charger Shelves

I designed and printed these to keep my Ryobi battery and charger handy. To charge I put the battery on the charger and return the charger to the charger shelf (doesn't work to put the combination on the battery shelf). I printed in PETG…

Downloads
52
Likes
9
Rating
0
P
PrintablesA4O Labs

IKEA Skådis Greenworks Gen1 40V Battery Charger Mount

Greenworks Gen1 40V Battery Charger Mount for IKEA SKÅDIS System This is a Greenworks Gen1 40V charger mount for their line of yard tools (mower, leaf blower, etc) that mounts to the SKÅDIS pegboard with printed M2.5 T-Nuts from 6d6178 .…

Downloads
51
Likes
7
Rating
0
P
PrintablesTyl3r

Makita XGT 40v Terminal

My copy of the Makita XGT 40v terminal block I made in fusion For the tabs I used copper pipe flattened out and cut to 17x18mm

Downloads
50
Likes
3
Rating
0
P
PrintablesMaxim7745

Ryobi 40V RY40402VNM Leaf Blower Nozzle Adapter

This adapter is intended as a basis for other designs. It affixes to the 40V Ryboi leaf blower model RY40402VNM. Original idea for a duster nozzle required too sharp a taper to work properly, but figured the adapter part might be useful…

Downloads
50
Likes
10
Rating
0
P
PrintablesA4O Labs

IKEA Skådis Greenworks Gen2 40V Battery Charger Mount V2

Greenworks Gen2 40V Battery Charger Mount V2 for IKEA SKÅDIS System This is an improved Greenworks Gen2 40V charger mount for their line of yard tools (mower, leaf blower, etc) that mounts to the SKÅDIS pegboard with printed M2.5 T-Nuts…

Downloads
50
Likes
6
Rating
0
P
PrintableseMJ

Parkside PPTLBA 40V hanger

The hanger consists of two elements that must be connected with an M5 or M4 countersunk screw.

Downloads
42
Likes
1
Rating
0